ZyXEL Communications VMG1312-B10A Bedienungsanleitung

www.zyxel.com

VMG1312-B10A /

VMG1312-B30A

Wireless N VDSL2 4-ports

Gateway with USB

Firmware V1.00

Edition 1, 11/2013

Default Login Details

LAN IP Address http://192.168.1.1

User Name admin

Password 1234

Quick Start Guide

Device Panels

POWER

DSL

INTERNET

ETHERNET 1-4 USB

WLAN/WPS

ON/OFFRESET

POWER

DSL USB

ETHERNET 1-4

WLAN/WPS

Overview

The Device is a VDSL2 router and Ethernet gateway with a four-port

built-in Ethernet switch and IEEE 802.11n wireless. The Device allows

wired and wireless clients to safely access the Internet. The built-in

firewall blocks unauthorized access to your network. The USB port

allows you to connect USB memory stick or USB hard drive for storing or

sharing files through the network. Other helpful features include Quality

of Service (QoS) which allows time-sensitive services and applications

to flow more smoothly.

Requirements

Make sure you have the following things before you start.

• Internet access - account information provided by your ISP, such as

user name, password, and so on.

• 3G account - if you want to access the Internet through a 3G

network. The Device uses this 3G connection as your WAN or a

backup when the DSL connection fails.

• Internet Explorer 6.0 and later versions, with JavaScript enabled, or

Mozilla Firefox 3 and later versions or Safari 2.0 and later versions.

Hardware Setup

To connect your Device:

1. Use a telephone cable to connect your Device’s DSL port to a

telephone jack (or the DSL or modem jack on a splitter if you have

one).

2. LAN: Use an Ethernet cable to connect a computer to a LAN port for

initial configuration and/or Internet access.

3. USB: There is one USB port on your Device. You can do the

following:

a. Connect a USB (version 2.0 or lower) memory stick or a USB hard

drive for file sharing. The Device automatically detects the USB

device. Alternatively, use a USB cable (not provided) to connect a

USB (version 2.0 or lower) printer to this port.

b. Insert a 3G adapter to access the Internet wirelessly via a 3G

network. The Device uses this 3G WAN connection as a backup

when the DSL connection fails.

4. POWER: Use the provided power adaptor to connect the POWER

socket to an appropriate power source. Make sure the power at the

outlet is on. After connecting the power adaptor, look at the lights on

the front panel.

•ThePOWER light blinks while your Device starts up and then stays

on once it is ready.

• Each LAN light stays on if the corresponding LAN port is properly

connected and blinks when there is traffic.

•TheUSB light turns on when there is a USB device (printer or

memory stick) or a 3G adapter connected to the Device and blinks

when transmitting data.

•TheDSL WAN light turns on when your Device has a DSL

connection.

•TheWLAN / WPS light flashes green and orange while WPS is in

process. It stays on green when the wireless LAN is ready and blinks

when there is traffic.

•TheINTERNET light turns on when the gateway is able to access

the Internet and will blink when your Device is sending or receiving

data.

If the lights do not come on, check your connections and inspect your cables

for damage. If the lights are still off, contact technical support.

If the WAN light is on but the INTERNET light is off, see the Tutorials and

Broadband chapters in your User’s Guide for how to use the Network

Setting > Broadband screen to set up the WAN connection.

If you want to have the Device use 3G as your WAN or as a backup when the

Ethernet WAN connection fails, see your User’s Guide for how to use the

Network Setting > Broadband > 3G Backup screen to set up the 3G WAN

connection.

Set Up a Wireless Network

You can set up a wireless network using the following methods:

Using Wireless Protected Setup (WPS)

Press the WPS button on the Device’s back panel for more than 5

seconds to turn the WPS function on.

Follow these steps to add a WPS-enabled device to the wireless

network using the WPS/WLAN button.

Place the devices you

want to connect near one

another.

Press the WPS button on

the Device.

The WPS light blinks

green and orange

Press the WPS button on

a compatible device

within 2 minutes of

pressing the button on

the Device.

The WPS light on the

Device shines steadily

when connected.

Set Up a Wireless Network Manually

The wireless LAN on your Device is enabled by default. To add a

wireless client to the network, use the settings found on the bottom panel

of your Device.

Configure wireless devices that you want to connect to the wireless

network to use the same wireless settings as the Device.

The default wireless settings vary for each Device. Refer to the bottom

panel of your device and use the provided information.

Log into the Web Configurator

Your device may already be set up for Internet access. However, you

may want or need to log on to the Device Web Configurator to perform

tasks:

• Configure your Internet access settings manually

• Customize the Quality of Service (QoS) and routing features

• Create firewall and web filter rules

• Edit remote management, as well as other features

1. In your browser, if the Device does not automatically re-direct you to

the login screen, go to http://192.168.1.1.

2. Enter the default user name admin and password 1234. Click Login.

If the login screen does not open, make sure you allow web browser pop-up

windows, JavaScripts and Java permissions. Your computer should be also

set to get an IP address automatically from a DHCP server. See the

appendices in your User’s Guide for more information.

3. In the next screen, you can change the login password. This is

recommended. Enter your new password in the New Password field.

Re-type your new password in the second field and then click Apply.

If you prefer not to change the password, leave the two fields blank

and click Skip.

4. The Quick Start Wizard screen appears. Follow the directions to

configure the Device’s time zone, Internet access, and wireless

settings.

5. The Network Map page shows whether the Device and computers/

devices connected to it have Internet access.

1010

6. Click Status to display the following screen, where you can view the

Device’s device, interface, and system information.

See your User’s Guide for how to use the rest of the Web Configurator

screens. You will need to refer to the section on how to setup the

Broadband connection if the INTERNET LED (light) remains off.

Andere Handbücher für VMG1312-B10A

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ZyXEL Communications Tor Handbücher

ZyXEL Communications

ZyXEL Communications ZyWALL USG 50 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications VMG1312-T20A Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-660H-D1 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications VMG8623-T50B Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ISG50 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications AMG1302-T series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications VMG8029 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications EMG1302-R10A Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-660HW-D1 V2 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-870HW-51A V2 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-870HW-51A V2 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications EMG2881-T20A Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-870HW-I Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-660HNT1 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyXEL ZyAIR B-220 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyXEL ZyWALL USG-1000 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications VSG-1200 V2 Referenzhandbuch

ZyXEL Communications

ZyXEL Communications FSG2200HNU Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZYWALL USG 20W Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ADSL 2+ Security Gateway Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-660N-T1A Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications CNA100 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-660HWP-D1 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyXEL ZyWALL USG-1000 Bedienungsanleitung

Beliebte Tor Handbücher anderer Marken

LST

LST M500RFE-AS Bedienungsanleitung

Kinnex

Kinnex Media Gateway Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace 2N StarGate Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Bedienungsanleitung

Telsey

Telsey CPVA 500 - SIP Bedienungsanleitung

RTA

RTA 460A-NNA4 Technisches Datenblatt

Shaw

Shaw Gateway HDPVR Bedienungsanleitung

ABB

ABB VSN900 Kurzanleitung

Commander

Commander Pulse Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Bedienungsanleitung

NETGEAR

NETGEAR C6300BD Bedienungsanleitung

Amit

Amit CDW531AM Bedienungsanleitung

HMS

HMS Netbiter EasyConnect EC150 Bedienungsanleitung

Huawei

Huawei EchoLife HG620 Bedienungsanleitung

AT&T

AT&T U-verse 3801 Gebrauchs- und Pflegehandbuch

Logic IO

Logic IO RTCU MX2 turbo Bedienungsanleitung

Suttle

Suttle MediaMAX MXM-521 Bedienungsanleitung

RTA

RTA 460MCBC-N2E Technisches Datenblatt