ZyXEL Communications P-2602HWNLI Bedienungsanleitung

P-2602HWNLI

802.11g Wireless ADSL2+ 4-port VoIP IAD

Quick Start Guide

Version 3.40

5/2006

Edition 1

P-2602HWNLI Quick Start Guide

Overview

Your P-2602HWNLI Integrated Access Device allows you to make phone calls over the Internet (Voice over

Internet, or VoIP) as well as regular analog (PSTN) or digital (ISDN) phone calls. It also provides Internet

access for your network.

The P-2602HWNLI also allows wired and wireless clients to safely access the Internet. It can connect up to

four Ethernet devices, and includes wireless networking capability.

The following figure shows your P-2602HWNLI, labeled A, connecting your computer to the Internet and

providing firewall protection. The telephones connected to the P-2602HWNLI can also make calls over the

Internet. See the User's Guide for more information on all features.

Note: When you set up your P-2602HWNLI you may need your Internet access and (SIP-based) voice

account information.

P-2602HWNLI Quick Start Guide

1 Connect Your P-2602HWNLI

1DSL: Use the gray ADSL cable to connect the DSL port to a telephone jack or the DSL (or MODEM) jack

on a splitter.

2Do one of the following to connect one or more telephones to the P-2602HWNLI. These are also known as

Foreign eXchange Station (FXS) connections.

PHONE: Use telephone wire (and any included telephone adaptors) to connect analog telephones to these

ports. Use the PHONE 1 port first.

P-2602HWNLI Quick Start Guide

Note: When the P-2602HWNLI does not have power, only the phone connected to the

PHONE 1 port can be used for making calls. Ensure you know which phone this is, so

that in case of emergency you can make outgoing calls.

ISDN PHONE: Use telephone wire to connect one or more ISDN telephones or an ISDN PBX to this port.

3 PSTN/ISDN: You can connect either a PSTN or an ISDN line to this port. This is a Foreign eXchange Office

(FXO) port. Use the included green PSTN cable or ISDN cable to connect the PSTN/ISDN port to the

telephone jack or the TEL or PHONE jack on a splitter.

Connect the PSTN line cable’s larger end to the PSTN/ISDN port.

The ISDN line cable’s connectors are of equal size. Connect either end to the PSTN/ISDN port.

Note: If you are using T-ISDN (UR-2), connect the green wire to a TAE connector before connecting it

to the telephone splitter's "phone" jack or a telephone wall jack.

4ETHERNET: Use an Ethernet cable to connect a computer to an Ethernet port for initial configuration and/

or Internet access.

5POWER:Use the included power adaptor to connect the POWER socket to an appropriate power source

(see the User’s Guide for details of power adaptors by region).

6Push in the POWER button and look at the lights on either side.

•ThePOWER light blinks during start-up and stays on once the P-2602HWNLI is

ready.

•TheDSL light blinks during start-up, and stays on once the P-2602HWNLI is

ready. If the DSL light is off, there is a problem with the hardware or the phone line

connection to the ISP.

•TheETHERNET lights blink once on startup, and remain on if there is an active

Ethernet connection. When the P-2602HWNLI is sending/receiving data on an

active Ethernet connection, the light blinks.

•TheWLAN light turns steady green when the wireless LAN is ready. It blinks when

the P-2602HWNLI is sending/receiving data through the wireless LAN.

• Use the following sections in this guide to get to the screens where you configure

Internet access, wireless and VoIP settings.

P-2602HWNLI Quick Start Guide

2 Initial Configuration

Open your web browser, and go to http://www.zyxel.com.

Your P-2602HWNLI tries to detect your Internet connection. This takes about two minutes. If any other

screens appear, follow the directions in the screen.

If http://www.zyxel.com opens correctly, your Internet access is ready. If the web page does not open, use the

following steps. You should have information provided by your ISP.

1Enter 192.168.1.1 as the web site address

in your browser.

2Click Login (the default password 1234 is already entered).

3Type (and retype) a new password and

click Apply.

P-2602HWNLI Quick Start Guide

4Select Go to Wizard setup and click

Apply.

5Click INTERNET/WIRELESS SETUP

to configure your Internet access

and/or wireless settings. Follow the

directions in the screens and enter

your Internet access information

exactly as it was given to you.

6Click VOICE OVER INTERNET

SETUP to configure your VoIP

account settings. See Section 2.1.

P-2602HWNLI Quick Start Guide

2.1 Voice Setup

Note: You should have a voice account already set up.

2.2 Regular Phone Line Configuration

When one of your VoIP accounts is registered, the P-2602HWNLI normally uses the Internet (not the regular

phone line) to make phone calls. Follow the directions in this section to make sure you can also use the

regular phone line while one of your VoIP accounts is registered.

Note: When the P-2602HWNLI does not have power, only the phone connected to the

PHONE 1 port can be used for making calls. Ensure you know which phone this is, so

that in case of emergency you can make outgoing calls.

In the main screen, click VoIP > PSTN Line (or ISDN Line if you want to configure for an ISDN phone).

PSTN (or ISDN)Line Pre-fix Number: If you want to make a

regular phone call after one of your VoIP accounts has been

registered you have to dial this number before you dial the

phone number.

Relay to PSTN (or ISDN)Line: Enter phone numbers for

regular phone calls (that do not use the Internet) that you

always want to dial without the prefix number. For example,

enter emergency phone numbers here.

Click Apply.

Fill in the fields with information from your

voice service provider. Leave the default

settings in fields for which no information

was provided (except if otherwise

specified).

If you have a SIP account like

1234@VoIP-provider.com,“1234” would

be the SIP Number and “VoIP-

provider.com” would be the SIP Service

Domain.

This screen configures SIP account 1.

Select the check box if you have a second

SIP account that you want to use.

P-2602HWNLI Quick Start Guide

2.3 Make Calls Through the Internet

When a PHONE light turns on, your SIP account is registered successfully. Dial a numerical SIP number (like

“12345” for example) on your phone’s keypad. Use your voice service provider’s dialing plan to make calls

through the Internet to regular telephone numbers. See your User’s Guide if you need to make peer-to-peer

VoIP calls or calls to SIP numbers that use letters.

3 Troubleshooting

If you cannot access the Internet, follow these steps.

1Check the device’s lights. If they are different from what is described in Section 1, make sure the

connections are correct. If the lights are still different, turn off the device, wait a few seconds, and turn it on

again.

2Follow the steps in Section 2 again. Make sure you enter the correct information. For example, if your

account has a user name and password, make sure you type it correctly. In addition, if you are not sure

which encapsulation your ISP uses, contact your ISP.

3If you are using a new Internet account, contact your ISP to make sure it is active.

4If you still have problems, see Troubleshooting in the User’s Guide.

If you can access the Internet, but you cannot make calls through the Internet, follow these steps.

1Make sure the VOICE OVER INTERNET SETUP wizard screens are properly configured (see Section 2.1).

2One of the PHONE lights should come on. Make sure that your telephone is connected to the

corresponding PHONE or ISDN PHONE port.

3You can also check the VoIP status in the Status screen.

Viewing Your Product’s Certifications

1Go to www.zyxel.com.

2Select your product from the drop-down list box on the ZyXEL home page to go to that product's page.

3Select the certification you wish to view from this page.

Andere Handbücher für P-2602HWNLI

Inhaltsverzeichnis

Andere ZyXEL Communications Netzwerk-Hardware Handbücher

ZyXEL Communications

ZyXEL Communications ZYWALL OTPV2 - Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NSA-220 Plus Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Internet Security Gateway ZyWALL 100 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications IES-6000 Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications UNS2300 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PLA450 Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications OLT2406 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyXEL ZyWALL P1 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZYAIR EXT-109 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications VPN Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 971M Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Network Storage Appliance NSA-220 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 2602HW Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications 2-Slot 10GBase-CX4 10Gigabit Module EM-412 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications IES-708 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications IES-612-51A Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NSA-210 Handbuch

ZyXEL Communications

ZyXEL Communications VMG4005-B60A Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 2602R Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NSA325 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NSA-2400 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications IES-6000 - ANNEXE 749 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Centralized Network Management Vantage CNM Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PM7516-R0 Bedienungsanleitung

Beliebte Netzwerk-Hardware Handbücher anderer Marken

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung

Yudor

Yudor YDS-16 Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-320L Bedienungsanleitung

Samsung

Samsung ES1642dc Gebrauchsanweisung

Honeywell Home

Honeywell Home LTEM-PV Montageanleitung

evertz

evertz 7700 Series Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-343 Bedienungsanleitung

Asante

Asante AsanteBridge 1012 Bedienungsanleitung

FireBrick

FireBrick FB2700 Bedienungsanleitung

Audiovox Electronics

Audiovox Electronics ARWH2T Bedienungsanleitung

ADC

ADC DSX-1 Handbuch

NetComm

NetComm NF2 Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 5620 Bedienungsanleitung

Dell EMC

Dell EMC XC6420 Series Bedienungsanleitung

Lanner

Lanner NCA-1020A Bedienungsanleitung

Allied Telesis

Allied Telesis AT-TN121-A Bedienungsanleitung

Lanner

Lanner NCA-1525 Bedienungsanleitung