ZyXEL Communications Dimension GS-4024 Handbuch

Protocol Based VLAN

(Virtual Local Area Network)

Ethernet Switch

ZyNOS 3.7

Support Notes

Version 3.70

August 2006

Protocol Based VLAN Support Note

Overview of Protocol Based VLAN

ZyXEL switches which support Protocol-based VLAN are configured with

multiple mapping layer 3 protocol types to VLAN membership and 802.1p

priority. Therefore, they are capable of filtering IP traffic from nearby

end-stations using a particular protocol such as IP, IPX, ARP or whatever

Ethernet-type that you want in a Hex value.

Notes:

Protocol Based VLAN is implemented in ZyXEL Switch as a “by port”

based feature. For ES-3124, you can apply up to 7 protocol based VLAN

rules on a port.

ES-2000 Series Switches running on ZyNOS 3.70 do NOT support

Protocol Based VLAN.

Protocol Based VLAN Support Note

Scenario of Protocol Based VLAN

In the following section, we will provide an example to illustrate how to

configure Protocol Based VLAN on a ZyXEL Switch. In this scenario, there is a

ZyXEL Management Switch which supports Protocol Based VLAN and port 1

of the Switch is connected to another 5-ports UnManagement switch. Two

clients are behind the UnManagement Switch. There are one PPPoE Client for

data and another VoIP Client using Fixed IP for Voice. We want to sort out all

the PPPoE traffic and mark it as VID 500. IP (VOIP) traffic will be assigned

another VLAN PVID, as was discussed in the 802.1Q VLAN Support Note.

Actions to perform in this scenario:

1. Use Protocol Based VLAN to sort out all the PPPoE traffic on port 1 and

mark it as VID 500 with 802.1p priority 1

Illustration of this scenario

Note:

Protocol Based VLAN has priority before PVID in the Ingress process.

Protocol Based VLAN Support Note

Configuration via GUI on ZyXEL Management Switch

1. Connect PC or Notebook to the port 1 using the RJ45 Cable.

2. By default, the MGMT IP of every in-band port is 192.168.1.1/24

3. Set your NIC to 192.168.1.2/24

4. Open an Internet browser such as IE and enter http://192.168.1.1 in

the URL field.

5. By default, you will need to insert “admin” as the username and “1234”

as the password.

6. After you login successfully, you will see a screen similar to the one

below.

7. To use Protocol Based VLAN to sort out all the PPPoE traffic on

port 1 and set its VID to 500 and 802.1p priority to 1, click

“Advanced Application” Æ“VLAN” Æ“VLAN Port Setting”. You will find

another tab called “Protocol Based Vlan”.

Protocol Based VLAN Support Note

8. Click on “Protocol Based Vlan” to get to the Protocol Based Vlan

setting page.

9. Since there are two “Ethernet-types” with PPPoE (8863, 8864), you

will need to create two Protocol Based VLAN rules. The first one is for

sorting out Ethernet-type 0x8863 on port 1 and to mark it as VLAN 500

with priority 1. The second rule is to sort out Ethernet-type 0x8864 on

port 1 and to mark it as VLAN 500 with priority 1 as well.

Protocol Based VLAN Support Note

10.When this is done, you should see that there are two Protocol Based

VLANs on your screen.

Protocol Based VLAN Support Note

11.Finally, do not forget to click the “SAVE” button to save all the changes.

Now, when there is PPPoE traffic coming from the port 1 to the switch,

it will be assigned VID 500.

Protocol Based VLAN Support Note

Configuration via CLI on ZyXEL Management Switch

Connect your PC or Notebook to the Switch Console.

1. Open your Terminal program (e.g. Hyper Terminal in Windows System).

2. Make sure your port settings are:

bps:9600

Data bits:8

Parity: None

Stop bits:1

Flow control: None:

Another way is to telnet / SSH the IP of the Switch Management Interface.

For In-band interface, the default management IP is 192.168.1.1 (VLAN 1).

For Out-band interface, the default management IP is 192.168.0.1

3. When successfully connected, enter the correct administrator user name

and password.

4. Now you are in the privileged mode.

5. Then issue command “configure” to switch to the configuration mode.

Issue the following commands to use Protocol Based VLAN to sort out all the

PPPoE traffic on port 1 and mark it with VID 500 and assign it 802.1p priority of

To enable Protocol Based VLAN on port 1:

Switch(config)# interface port-channel 1

Switch(config-interface)#protocol-based-vlan name PPPoE1 ethernet-type

0x8863 vlan 500 priority 1

Switch(config-interface)#protocol-based-vlan name PPPoE2 ethernet-type

0x8864 vlan 500 priority 1

Switch(config-interface)#exit

To save your configuration under privileged mode:

Protocol Based VLAN Support Note

Switch#write mem

Andere Handbücher für Dimension GS-4024

Inhaltsverzeichnis

Andere ZyXEL Communications Netzwerk-Router Handbücher

ZyXEL Communications

ZyXEL Communications O2 HomeBox Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications VMG8924-B10A Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications VMG8825-B Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 128IMH Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications o2 HomeBox 6641 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications XG3700 Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications 1 Handbuch

ZyXEL Communications

ZyXEL Communications LTE3301-PLUS Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG-416N Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG6604 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-861H-G2 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-2812HNU-51c Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG-419N v2 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications VMG5313-BXB SERIES Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications MS-7206 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications 650 Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NXC5200 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PRESTIGE 153 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications 660H/HW(-I) Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications LTE3316 Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications GS-4012F/4024 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-2802HW-I Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 2864I Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Dimension ES-4124 L3 Handbuch

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise

LevelOne

LevelOne FBR-1416 Bedienungsanleitung