ZyXEL Communications P-2608HWL-Dx Series Bedienungsanleitung

P-2608HWL-Dx

802.11g Wireless ADSL2+ VoIP IAD

Quick Start Guide

Version 3.40

10/2006

Edition 1

P-2608HWL-Dx Quick Start Guide

1 Make Your Hardware Connections

Rear Panel

1DSL: In the P-2608HWL-Dx, the DSL port handles both the ADSL and regular telephone service

connections. Connect the v-shaped cable (with one gray and one green wire) to the P-2608HWL-Dx’s DSL

port. Connect the gray wire to the MODEM or DSL jack on a telephone or ISDN splitter (not included) and

the green wire to the splitter's TEL or PHONE jack. Connect the LINE jack to your telephone wall outlet.

VIf you are using T-ISDN (UR-2), connect the green wire to the UR-2 TAE connector before

connecting it to the telephone splitter's "phone" jack or a telephone wall jack.

P-2608HWL-Dx Quick Start Guide

2ETHERNET1~4: Use Ethernet cables to connect a computer to this port for initial configuration and/or

Internet access.

3 PHONE 1-8: Use a telephone cable to connect your telephones to these ports. If you only have one

telephone, you should use port 1.

Side Panel

1POWER:Use the power adaptor provided with your P-2608HWL-Dx to connect an appropriate power

source to this port.

2Push in the POWER button.

2 LEDs (Lights)

Look at the LEDs on the front panel of the P-2608HWL-Dx.

•ThePOWER LED blinks during start-up and is green once the P-2608HWL-Dx is ready.

•TheWLAN LED turns on when the wireless LAN is ready. It blinks when the P-2608HWL-Dx is sending or

receiving data through the wireless LAN.

•TheDSL LED blinks when the P-2608HWL-Dx is attempting to detect a carrier signal and it stays on if a con-

nection is ready.

P-2608HWL-Dx Quick Start Guide

•ThePHONE LEDs stay on when your SIP account is registered and they blink if the receiver is off the hook.

VIf none of the LEDs are on, turn the device off and recheck your hardware connections.

3 Configure Your P-2608HWL-Dx

VIf your browser cannot find this screen, make sure your browser is configured correctly. See

Troubleshooting in the User’s Guide for details.

1Open your browser, and go to http://192.168.1.1.2Enter the password 1234. Then, click Login.

P-2608HWL-Dx Quick Start Guide

3.1 Internet/Wireless Setup

1Click INTERNET/WIRELESS SETUP.

Wait while the P-2608HWL-Dx tries to detect your

Internet connection. If the P-2608HWL-Dx cannot

detect your Internet connection, follow the

directions. Enter the information provided by your

ISP. Keep the default settings if your ISP did not

provide some information.

Make sure your wireless security settings are

compatible with your existing wireless devices.

See the User’s Guide for more information on

wireless networks. If you want to set up OTIST,

go to Section 3.2.

2When your Internet connection is setup

correctly, the DSL LED should be green. When

you are finished click Return to Wizard Main

Page.

3Follow the directions in this screen. 4Click Go to Wizard setup. Then, click Apply.

P-2608HWL-Dx Quick Start Guide

3.2 OTIST

ZyXEL's One-Touch Intelligent Security Technology (OTIST) feature allows you to automatically configure the

SSID and WPA-PSK on all OTIST-equipped wireless clients within range of the P-2608HWL-Dx. Note

• If you enable OTIST but select Disable wireless security using the wireless wizard, the P-2608HWL-Dx will

create a WPA-PSK automatically.

• If you enable OTIST and select Manually assign a WEP key using the wireless wizard, the P-2608HWL-Dx

will replace the WEP key with a WPA-PSK.

• Enable OTIST only if your wireless clients support WPA and OTIST.

You must enable OTIST on the P-2608HWL-Dx and all wireless clients within three minutes in any order.

To start OTIST on the P-2608HWL-Dx, hold in the RESET button for three to five seconds. Do not hold the

RESET button in for too long, as this will reset the P-2608HWL-Dx to the factory defaults.

To enable OTIST on wireless clients, click Start in the Adapter screen. The Setup Key is 01234567 by default.

If you have previously saved a setup key on the P-2608HWL-Dx, use it instead of the default.

For more information, see Wireless LAN in the User's Guide.

Follow the rest of the directions to set up your wireless network. When you are done, click Return to Wizard

Main Page.

3.3 VoIP Setup

1Click VOICE OVER INTERNET SETUP. You

should have the information provided by your VoIP

service provider.

P-2608HWL-Dx Quick Start Guide

2Enter the information provided by your VoIP service

provider. Keep the default settings if your VoIP

service provider did not provide some information.

If you have a SIP account like 1234567@VoIP-

provider.com, the SIP Number is 1234567, and the

SIP Service Domain is VoIP-provider.com.

3When you are done, the PHONE LED should be on.

Close the wizard and the main screen opens.

3.4 Regular Phone Line Setup

When one of your VoIP accounts is registered, the P-2608HWL-Dx normally uses the Internet (not the regular

phone line) to make phone calls. Follow the directions in this section to make sure you can also use the

regular phone line while one of your VoIP accounts is registered.

"When the P-2608HWL-Dx does not have power, only the phone connected to the PHONE

1port can be used for making calls. Ensure you know which phone this is, so that in case

of emergency you can make outgoing calls

In the main screen, click VoIP > PSTN Line.

PSTN Line Pre-fix Number: If you want to make a regular

phone call while one of your SIP accounts is registered. Enter

a prefix number (1 to 7 digits long) in the PSTN Line Prefix

Number field. These numbers tell the P-2608HWL-Dx that

you want to make a regular phone call.

Relay to PSTN Line: Enter phone numbers for regular phone

calls (that do not use the Internet) that you always want to dial

without the prefix number. For example, enter emergency

phone numbers here.

Click Apply.

P-2608HWL-Dx Quick Start Guide

4 Make Phone Calls

Follow these directions to make calls over the Internet.

• If you want to dial a SIP number that only uses numbers (for example, “12345”), dial the number on your

phone’s keypad. You can also set up a speed-dial entry, if you want. See the User’s Guide for instructions.

• If you want to dial a SIP number that uses letters or if you want to make a peer-to-peer call, set up a speed-dial

entry first. See the User’s Guide for instructions. Then, dial the speed-dial number to make the call.

• If you want to call regular telephone numbers, use your VoIP service provider’s dialing plan.

Follow these directions to make phone calls that do not use the Internet.

• If you set up the phone number in the Relay to PSTN section (Section 3.4), just dial the phone number.

• If the PHONE light is off, just dial the phone number.

• Otherwise, first dial the prefix you set in Section 3.4, and then dial the phone number.

Follow these directions to call the phone that is connected to the P-2608HWL-Dx.

• Use your VoIP service provider’s dialing plan, or just dial the phone number.

View Your Product’s Certifications

1Go to www.zyxel.com.

2Select your product from the drop-down list box on the ZyXEL home page to go to that product's page.

3Select the certification you wish to view from this page.

Andere Handbücher für P-2608HWL-Dx Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ZyXEL Communications Netzwerk-Router Handbücher

ZyXEL Communications

ZyXEL Communications ZyWALL VPN2S Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications LTE7460-M608 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-660R-Tx Series Handbuch

ZyXEL Communications

ZyXEL Communications ZyWall Montageanleitung

ZyXEL Communications

ZyXEL Communications NBG7510 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 128IMH Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PMG2005-T20C Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications 623ME(-I) Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications XS3700 Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ES-2024 Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 650H-E Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications VES-1008 Handbuch

ZyXEL Communications

ZyXEL Communications ZyXEL Prestige 100MH Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyWALL SSL 10 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications IES-5000 Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyWALL Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-660R-T1 v3 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-320W v3 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Dimension ES-3124PWR Referenzhandbuch

ZyXEL Communications

ZyXEL Communications o2 HomeBox 6641 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications GS-1116A Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications B-6010 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyXEL Prestige 660R Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications GS1920 Series Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise

LevelOne

LevelOne FBR-1416 Bedienungsanleitung