ZyXEL Communications P-2812HNU-51c Bedienungsanleitung

www.zyxel.com

Dual WAN VDSL2 IAD with

802.11n Wireless

Firmware V1.00

Edition 1, 11/2009

P-2812HNU-51c

DEFAULT LOGIN DETAILS

IP Address: https://192.168.1.1

Username: Admin account: admin

User account: user

Password: Admin account: 1234

User account: user

ZyXEL Communications Corporation

Device Panels

ON/OFF

RESET

POWER

ETHERNET

PORTS

PHONE

PORTS

DSL/WAN

LEDS

WPS

WAN PORT

USB PORT

DSL PORT

Overview

The P-2812HNU-51c is a router which combines high-speed VDSL/

ADSL Internet access, a built-in switch, a firewall and high-speed

wireless networking capability. It also has two USB 2.0 ports for sharing

files via a USB compatible storage device and two phone ports for

making calls over the Internet (Voice over IP or VoIP).

Requirements

Make sure you have the following things before you start.

• Internet access - account information provided by your ISP, such as

user name, password, and so on.

• VoIP account - You need the account information provided by your

VoIP service provider (the company that lets you make phone calls

over the Internet).

• Internet Explorer 6.0 or later versions, with JavaScript enabled.

To read the User's Guide insert the CD that came in the box into your

CD-ROM drive. A screen should pop up. Navigate to the User's Guide

from this screen. If a screen does not pop up, open Windows Explorer

(click My Computer), click on the CD-ROM drive (usually drive D) and

navigate to it from there.

Hardware Connections

Remove the P-2812HNU-51c’s plastic cover before using it.

1. Do one of the following for your Internet connection:

a. DSL: Use a telephone wire to connect this port to a telephone jack

(or the DSL or MODEM jack on a splitter, if you have one).

b. WAN: If you have a DSL router or modem already in your network

or you want to use a cable modem, push the DSL/WAN switch to

the WAN side and use an Ethernet cable to connect this port to an

Ethernet jack with Internet access.

2. ETHERNET: Use an Ethernet cable to connect a computer to one of

these ports for initial configuration and/or Internet access.

3. USB 2.0: Connect a USB (version 2.0 or lower) memory stick or a

USB hard drive for file sharing. The P-2812HNU-51c automatically

detects the USB device. Use a USB extension cable if the stick is too

big to fit.

4. PHONE: Use a telephone cable (and any telephone adaptor provided

with your P-2812HNU-51c) to connect a telephone to the PHONE 1

or PHONE 2 port. If you only have one telephone, you should use

port 1.

5. Use the power adaptor provided with your P-2812HNU-51c to

connect an appropriate power source to this socket.

6. Push the power button to the on position.

Look at the LEDs (lights) on the rear panel of the

P-2812HNU-51c.

• The PWR/SYS light blinks during start-up and

is green once the P-2812HNU-51c is ready.

• An ETHERNET light turns on if the

corresponding ETHERNET port is properly

connected. An Ethernet port’s light blinks

when the P-2812HNU-51c is sending or

receiving data through it.

• The WLAN/WPS light stays green when the

wireless LAN is ready. It blinks when the P-

2812HNU-51c is sending/receiving data

through the wireless LAN.

• The DSL light stays on if a physical DSL

connection exists and blinks when

transmitting data.

The WAN light stays on if this port is properly

connected and blinks when transmitting data.

The INTERNET light is green when Internet

access is available.

• The PHONE lights stay on when your SIP

account is registered and they blink if the

receiver is off the hook.

• The USB light turns on when there is a USB device connected to

the P-2812HNU-51c and blinks when transmitting data.

 If no lights are on, check your connections. Make sure that

you have the power adaptor connected to the P-2812HNU-

51c and plugged in to an appropriate power source. Make

sure the power source is turned on. Turn the P-2812HNU-

51c off, wait for a few seconds and turn it back on. If the

LEDs are still off, contact your local vendor.

Log into the Web Configurator

1. Open your browser and enter https://192.168.1.1 (the P-2812HNU-

51c's default IP address) as the address.

2. For administrator login, enter username admin and password 1234

(default). Only administrators can configure the SIP account settings.

For user login, enter user as the username and user as the

password. Click Login.

 If the login screen does not open, make sure you allow web

browser pop-up windows, JavaScripts and Java

permissions. Your computer should be also set to get an IP

address automatically from a DHCP server. See the

appendices in your User’s Guide for more information.

See your User's Guide for how to use the VoIP > SIP screen to set up

your VoIP account if the INTERNET light is green but the PHONE light is

off.

If the PHONE light is on, skip to Using Your Phones on page 13 to see

how to make calls through the Internet.

See your User’s Guide for how to use the Network > WAN screens to

set up the WAN connection:

• If the DSL/WAN switch is set to DSL and the DSL light is on but

the INTERNET light is off.

• If the DSL/WAN switch set to WAN and the WAN light is on but

the INTERNET light is off.

Set Up a Wireless Network

To set up a wireless network you need at least one wireless network

card/adapter.

• If you have a desktop computer, use either a wireless USB adapter

or a wireless PCI adapter.

• If you have a laptop, use either a wireless USB adapter or a

wireless CardBus card. These are built into many laptops.

There is no wireless security enabled on the P-2812HNU-51c by default.

If you do not set wireless security, anyone within transmission range

could use your P-2812HNU-51c to access your network and the Internet.

See the User’s Guide for how to configure wireless security settings.

Setting Up a Wireless Network with WPS

If your wireless devices display the WPS logo, you

can use Wi-Fi Protected Setup (WPS) to add

wireless devices to your wireless network. If your

wireless devices do not display the WPS logo, go to

Set Up a Wireless Network Manually on page 11 to manually set up a

wireless network.

The P-2812HNU-51c supports two WPS methods for creating a secure

connection.

• Push Button Configuration - create a secure wireless network

simply by pressing the P-2812HNU-51c’s physical WPS button.

See Push Button Configuration on page 9.

• PIN Configuration - create a secure wireless network by entering

your wireless device’s PIN (Personal Identification Number) into the

configuration screen of the P-2812HNU-51c. See PIN Configuration

on page 10.

You must use the same method on the P-2812HNU-51c and the wireless

client.

Push Button Configuration

1. Place a WPS-enabled device that is installed in your system and

supports the WPS Push Button method within range of the P-

2812HNU-51c.

2. Press the WPS button on the P-2812HNU-

51c’s rear panel for five seconds.

3. Use the WPS-enabled device’s WPS button.

It can be either a button in the utility or a

physical button. See the device’s

documentation if you cannot locate the WPS

button. It doesn’t matter which button is

pressed first. You must press the second

button within two minutes of pressing the

first one.

4. The P-2812HNU-51c and the wireless device establish a secure

connection. This can take up to two minutes.

5. Congratulations! Your computer is now ready to connect to the

Internet wirelessly through your P-2812HNU-51c.

PIN Configuration

1. Place a WPS-enabled device that is installed in your computer and

supports the WPS PIN configuration method within range of the P-

2812HNU-51c.

2. Log into the P-2812HNU-51c’s web configurator at https://

192.168.1.1 (see Log into the Web Configurator on page 7for more

details on this).

3. In the Status screen click Network in the left panel then click

Wireless LAN. In the Wireless LAN screen click the WPS Station

tab.

Andere Handbücher für P-2812HNU-51c

Inhaltsverzeichnis

Andere ZyXEL Communications Netzwerk-Router Handbücher

ZyXEL Communications

ZyXEL Communications NWA570N Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ADSL2+ Ethernet / USB Router P-660RU-Tx v2 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 2602HW Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-202H Plus v2 Handbuch

ZyXEL Communications

ZyXEL Communications P-660R(-I) Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-660RU-Tx Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PRESTIGE 153 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-2802HW(L)-IX Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG-419N v2 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-660R Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications WAH7003 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Dimension GS-3012 Handbuch

ZyXEL Communications

ZyXEL Communications P-660H-61 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications VMG1312 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-334W Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 782R Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZYWALL 2 WG Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications UAG4100 Handbuch

ZyXEL Communications

ZyXEL Communications AMG1302-T11C Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications VMG8324 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-320W v3 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NWA5160N Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-2812HNU-51c Handbuch

ZyXEL Communications

ZyXEL Communications ES-2024 Series Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise

LevelOne

LevelOne FBR-1416 Bedienungsanleitung