ZyXEL Communications P-2812HNUL-F1 Bedienungsanleitung

www.zyxel.com

Quick Start Guide

P-2812HNU(L)-Fx Series

802.11n Wireless VDSL2 VoIP

Combo WAN IAD

Firmware Version 3.10

Edition 1, 3/2011

DEFAULT LOGIN DETAILS

IPAddress: http://192.168.1.1

Username: Admin account: admin

User account: user

Password: Admin account: 1234

User account: 1234

2011 ZyXEL Communications Corporation

Device Panels

POWER

DSLINTERNET

PHONE1,2 WAN

WLAN/WPSETHERNET 1‐4

LED

LEDS

USB1,2

Front

LED LED

LED

LEDS

WLAN/WPS

BUTTON

LED

ON/OFF

RESET

POWER

ETHERNET

PORT 1‐4PHONE

PORT 1,2

WAN

PORT

DSL

PORT

USB

PORT

USB

PORT

BUTTON

Back

BUTTON

FXO

PORT

(

P-2812HNUL-Fx only)

Requirements

Make sure you have the following things before you start:

•INTERNET ACCESS: You need an Internet account with an ISP

(Internet Service Provider) and information such as your user name,

password, and so on.

•VoIP ACCOUNT: If you wish to make phone calls over the Internet,

you need the account information provided by your VoIP service

provider (the company that lets you make phone calls over the

Internet).

•3G account: if you want to access the Internet through a 3G

network. The P-2812HNU(L)-Fx Series uses this 3G connection as

your WAN or a backup when the DSL/Ethernet WAN connection

fails.

•WEB BROWSER: Internet Explorer 6.0 and later versions, with

JavaScript enabled, or Mozilla Firefox 3 and later versions, or Safari

2.0 and later versions. The browser will be used to access the

Internet and/or access the P-2812HNU(L)-Fx’s Web Configurator.

Hardware Connections

RJ-11 port for

RJ-45 port for

P-2812HNU(L)-F1

P-2812HNU(L)-F3

1. Do one of the following for your Internet connection:

a. DSL: For P-2812HNU(L)-F1, the port is RJ-11; for P-2812HNU(L)-

F3, the port is RJ-45. Use a telephone wire to connect this port to

a telephone jack (or the DSL/MODEM jack on a splitter, if you

have one).

b. WAN: If you have a DSL router or modem already installed in your

network, use an Ethernet cable to connect this port to an

Ethernet jack in the modem with Internet access.

2. FXO (for “L” models only): You need a splitter to use the FXO port.

Use a PSTN line cable to connect the TEL (or PHONE) jack on a

splitter to this port.

3. USB 2.0: There are two USB ports on your P-2812HNU(L)-Fx Series,

one is at the back panel and one is at the side panel. You can do the

following:

a. Use a USB cable (not provided) to connect a USB device

(version 2.0 or lower) such as USB hard drive or printer for file or

printer sharing.

b. Insert a 3G adapter to access the Internet wirelessly via a 3G

network. The P-2812HNU(L)-Fx Series uses this 3G WAN

connection as a backup when the DSL/Ethernet WAN connection

fails.

4. ETHERNET: If you want a wired connection to the P-2812HNU(L)-Fx

Series, use an Ethernet cable to connect a computer to one of these

ports for initial configuration and/or Internet access.

5. PHONE: To make calls over the Internet, use a telephone cable (and

any telephone adaptor provided with your P-2812HNU(L)-Fx Series)

to connect a telephone to the PHONE 1 or PHONE 2 port. If you only

have one telephone, you should use PHONE 1.

6. Use the power adaptor provided with your P-2812HNU(L)-Fx Series

to connect an appropriate power source to this socket.

7. Push the POWER button to the ON position.

Look at the LEDs (lights) on the front panel of the P-2812HNU(L)-Fx

Series:

• The POWER light blinks during start-up and stays on once the P-

2812HNU(L)-Fx Series is ready.

• The ETHERNET light turns on if the corresponding ETHERNET port

is properly connected and it blinks when there is traffic. If you do not

connect a computer correctly to any of these ports, the ETHERNET

lights will not turn on.

• The WLAN/WPS light stays on and green when the wireless LAN is

ready.The light will not turn on if the wireless connection is not

activated. It is blue when WPS configured.

• The DSL light will stay on if a physical DSL connection exists.

• The WAN light stays on if a physical Ethernet connection to the WAN

exists. It blinks when transmitting data.

• The INTERNET light is green when Internet access is available. It

blinks when transmitting data.

• The PHONE lights stay on when your SIP account is registered and

they blink if the receiver is off the hook.

• The USB light(s) turn on when there is a USB device (printer or

memory stick) or a 3G adapter connected to the P-2812HNU(L)-Fx

Series and blinks when transmitting data.

If the POWER light does not turn on during start up, try turning the P-2812HNU(L)-

Fx Series off,check the connections, wait a few seconds and then turn it back on. If

the problem persists, you may have a hardware problem and you need to contact

your vendor.

Internet Access Setup

• If you are using a DSL connection and you have Internet access, the

DSL and INTERNET lights will be on.

• If you are using an Ethernet WAN connection and you have Internet

access, the WAN and INTERNET lights will be on.

Open your web browser and go to http://www.zyxel.com. You may be

prompted to enter your username and password when attempting to browse.

• If the DSL or WAN lights are not on, try turning the P-2812HNU(L)-

Fx Series off, check the connections, wait a few seconds and then

turn it back on. If the DSL or WAN lights are still not on, contact your

service provider.

• If the DSL or WAN lights are on, but the INTERNET light is off, you

may need to enter your Internet access configuration using the Web

Configurator - see page 10.

Setting Up a Wireless Connection

If you want to set up a wireless connection using the P-2812HNU(L)-Fx

Series, you can use the wireless SSID (network name) and the

encryption key located in the back panel.

If you wish to use WPS (Wi-Fi Protected Setup), please refer to the

User’s Guide.

Setting Up a Wireless Connection using the

Information on the Label

The wireless function on your device is disabled by default. Press the P-

2812HNU(L)-Fx Series’ WLAN ON/OFF at the top panel for 1 second to

turn this function on or off.

To add a wireless client to the network, use the settings found in the

back panel of the P-2812HNU(L)-Fx Series, such as the following

example:

1. Right-click the wireless adapter icon which appears in the bottom

right of your computer monitor. Click View Available Wireless

Networks.

2. Select the P-2812HNU(L)-Fx Series’ SSID name and click Connect

(A). The SSID “SecureWirelessNetwork” is given here as an

example.

SSID: SecureWirelessNetwork

WPA2-PSK: 7WC3R7TVKWK3R

3. You are prompted to enter a password. Enter the encryption key

(WPA-PSK) found in the back panel of the P-2812HNU(L)-Fx Series

and click Connect.

4. You may have to wait several minutes while your computer connects

to the wireless network.

5. You should now be securely connected wirelessly to the P-

2812HNU(L)-Fx Series.

#If you cannot connect wirelessly to the P-2812HNU(L)-Fx Series, check that

you have selected the correct SSID and entered the correct security key. If

that does not work, ensure that the WLAN/WPS LED on the front panel is

turned on.

Making Phone Calls

Follow these directions to make calls over the Internet.

1. To dial a SIP number, press the numbers on your phone’s keypad to

make the call.

2. To call regular telephone numbers, use your VoIP service provider’s

dialing plan.

1010

3. For call forward service, contact your service provider to know if they

support this feature.

4. To receive a call through the P-2812HNU(L)-Fx Series, the other

party must have your SIP number and a SIP account of their own.

The Web Configurator

The Web Configurator is a web browser tool that allows you to configure

the P-2812HNU(L)-Fx Series. The computer and the P-2812HNU(L)-Fx

Series need to be in the same IP address range to use this tool.

1. Open your browser and enter http://192.168.1.1 (the P-2812HNU(L)-

Fx Series' default IP address).

2. For administrator login, enter the default username “admin” and

password “1234”.

3. Click Login.

#If the login screen does not open, make sure you allow web browser pop-up

windows, JavaScript and Java permissions. Your computer should also be

set to get an IP address automatically from a DHCP server. See your User’s

Guide for more information.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ZyXEL Communications Netzwerk-Router Handbücher

ZyXEL Communications

ZyXEL Communications P-660R-Tx v2 Series Handbuch

ZyXEL Communications

ZyXEL Communications PRESTIGE 128 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG4604 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications XGS3700-24HP Betriebsanleitung

ZyXEL Communications

ZyXEL Communications WAH7130 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-663H-51 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyXEL Dimension ES-105A Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PMG2005-T20C Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyXEL ZyWALL P1 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NR2101 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ES-3124F Handbuch

ZyXEL Communications

ZyXEL Communications PRESTIGE P660R-6XC Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications AMG1202-T10A Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG4604 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications AX Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 128L Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG318S Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 645R Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NXC5500 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-660R(-I) Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications XTREMEMIMO X-550 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ES-2024 Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 652H/HW Montageanleitung

ZyXEL Communications

ZyXEL Communications GS1920 Series Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise

LevelOne

LevelOne FBR-1416 Bedienungsanleitung