ZyXEL Communications P-660R-T1 V2 Bedienungsanleitung

P-660R-TxC Series

ADSL2+ Access Router

Quick Start Guide

Version 3.40

Edition 1

2/2006

P-660R-TxC Series Quick Start Guide

Overview

The P-660R-TxC ADSL2+ access router is the ideal device for small networks connecting to the Internet via

ADSL. See your User’s Guide for background information on all features.

1 Hardware Connections

If you prefer to see a multi-media animation of how to make hardware connections, see the included CD.

1DSL: Use a telephone wire to connect your P-660R-TxC’s DSL port to a telephone jack (or to a splitter, if

one is already installed).

2ETHERNET: Use an Ethernet cable to connect a computer to the ETHERNET port for initial configuration

and/or Internet access.

3POWER: Use the included power adaptor to connect the POWER socket to an appropriate power source.

After you’ve made the connections, push in the power button to turn on the P-660R-TxC. Look at the lights on

the front panel. The POWER light blinks while performing system testing. The POWER light then turns steady

on if the testing is successful. The ETHERNET light turns on if the LAN port is properly connected.

2 Configuration for Internet Access

You may configure the P-660R-TxC for Internet access in any one of these ways:

• Configuration Genie

• Zero Configuration

•Web Configurator Internet Access Wizard

P-660R-TxC Series Quick Start Guide

Note: Configuration genie and Zero configuration are only able to configure the device automatically for

Internet access if you are using PPPoE, PPPoA or ENET ENCAP encapsulation with a

dynamically-assigned IP address from your ISP.

If you’re not using these Internet access settings, then use the Web Configurator Internet

Access Wizard to manually configure the device.

You will need your Internet access information such as user name and password if given by your ISP.

2.1 Configuration Genie

From the included CD, click “Multimedia Auto Provisioner” (the installation and configuration assistant) and

then click “Installation Tutorial”. After you’ve viewed the tutorial, click “Configuration Genie” at the end of the

installation tutorial or from “Multimedia Auto Provisioner” in the CD.

2.2 Zero Configuration

Launch your web browser and navigate to any web site (for

example, www.zyxel.com). The P-660R-TxC automatically

detects and configures your Internet connection. This may

take about two minutes.

If you have a PPPoE or PPPoA connection, a screen displays

prompting you to enter your Internet account information. Enter

the username, password and/or service name exactly as

provided. Click Log on to the Internet !.

INFORMATION FROM ISP YOU ARE USING

ENCAPSULATION METHOD MODE IP ADDRESS

None RFC1483 Bridge N/A

ENET ENCAP Routing Dynamic

An IP address only RFC1483 Routing Static

A user name and password PPPoA or PPPoE Routing Dynamic

PPPoA Bridge N/A

A user name, password and an IP address PPPoA or PPPoE Routing Static

An IP address, subnet mask and a gateway IP

address

ENET ENCAP Routing Static

P-660R-TxC Series Quick Start Guide

2.3 Web Configurator Internet Access Wizard

2.3.1 Accessing the Web Configurator

1Launch your web browser. Enter “192.168.1.1” as the web site address.

Note: If you do not see the next screens, then please read Section 4.1 on page 8.

2Click Login.

3Type a new password (retype it to confirm) and click Apply. Otherwise click Ignore. You then see the main

web configurator screen.

4In the Site Map screen, click Wizard Setup.

P-660R-TxC Series Quick Start Guide

2.3.2 Internet Access Setup

1Configure the Internet access settings in this step. The wizard screens vary depending on the Mode and

Encapsulation you chose in the first wizard screen.

Note: Enter the Internet access information given to you by your ISP exactly in each wizard screen. If

not given, leave the fields set to the default.

RFC 1483

A) Select Routing if your ISP gave

you an IP address and allows

multiple computers to share an

Internet account. Otherwise, select

Bridge. Then select RFC 1483.

B) Click Next.

C) If you selected Routing, enter the

IP address given by your ISP.

D) If you selected Routing,select

SUA Only when you have one

public IP address, Full Feature

when you have more than one

public IP address (for translation)

or None to disable NAT.

E) Click Next.

ENET ENCAP

A) Select Routing, then ENET

ENCAP.

B) Click Next.

C) If your ISP gave you an IP

address, subnet mask and

gateway address, select

Static IP Address and enter

them. Otherwise, select

Obtain an IP Address

Automatically.

D) Select SUA Only if you

have one public IP address,

Full Feature if you have

more than one public IP

address (for translation) or

None to disable NAT.

E) Click Next.

P-660R-TxC Series Quick Start Guide

PPPoE

A) Select Routing, then

PPPoE.

B) Click Next.

C) Enter the service name,

username and password

given by your ISP.

D) If your ISP gave you an IP

address, select Static IP

Address and enter it.

Otherwise, select Obtain an

IP Address Automatically.

E) Select Nailed-Up

Connection to have your

connection up all the time.

Otherwise, select Connect

on Demand and specify an

idle time-out period (in

seconds) in the Max. Idle Timeout field.

F) Select SUA Only if you have one public IP address, Full Feature if you have more than one public IP

address (for translation) or None to disable NAT.

G) Click Next.

PPPoA

A) Select Routing if your ISP

allows multiple computers

to share an Internet

account. Otherwise, select

Bridge. Then select

PPPoA.

B) Click Next.

C) Enter the username and

password given by your

ISP.

D) If your ISP gave you an IP

address, select Static IP

Address and enter it.

Otherwise, select Obtain an

IP Address Automatically.

E) Select Nailed-Up

Connection to have your

connection up all the time.

P-660R-TxC Series Quick Start Guide

Otherwise, select Connect on Demand and specify an idle time-out period (in seconds) in the Max. Idle

Timeout field.

F) If you selected Routing, select SUA Only when you have one public IP address, Full Feature when you

have more than one public IP address (for translation) or None to disable NAT.

G) Click Next.

2Verify your LAN and

WAN settings and click

Log on to the Internet !.

3The P-660R-TxC

automatically tests the

connection to the

computer(s) connected

to the LAN port. To test

the connection from the

P-660R-TxC to the ISP,

click Start Diagnose.

Otherwise click Return

to Main Menu to go back

to the main screen.

3 NAT

NAT (Network Address Translation - NAT, RFC 1631) means the translation of an IP address in one network to

a different IP address in another. For example, you could translate one public IP address to multiple private IP

addresses on your LAN (SUA Only). You must select Routing mode to use routing features such as NAT.

Click

Advanced

Setup and

then NAT to

open the

NAT-Mode

screen.

Select SUA

Only if you

have one public IP address and Full Feature if

you have multiple public IP addresses (for

address translation).

If you have

servers on your

LAN, configure

an SUA server

set to have

them visible to

the outside.

From the NAT -

Mode screen

click Edit

Details and fill

in the fields as

shown.

P-660R-TxC Series Quick Start Guide

4 Troubleshooting

4.1 Set Up Your Computer’s IP Address

This section shows you how to set your Windows NT/2000/XP computer to automatically get an IP address.

This ensures that your computer can connect with your P-660R-TxC. Refer to your User’s Guide for detailed

IP address configuration for other Windows and Macintosh computer operating systems.

1In Windows XP, click start, Control Panel. In Windows 2000/NT, click Start, Settings, Control Panel.

2In Windows XP, click Network Connections. In Windows 2000/NT, click Network and Dial-up

Connections.

3Right-click Local Area Connection and then click Properties.

PROBLEM CORRECTIVE ACTION

None of the LEDs turn on

when you connect the P-

660R-TxC’s power.

Make sure that you have the correct power adaptor connected to the P-660R-TxC, it is

plugged into an appropriate power source and the P-660R-TxC is turned on.

Check all cable connections. If the LEDs still do not turn on, you may have a hardware

problem. In this case, you should contact your local vendor.

Cannot access the P-

660R-TxC from my

computer.

Check the cable connection from your computer to the P-660R-TxC.

Make sure your computer’s IP address is in the same subnet as the P-660R-TxC’s IP

address (see Section 4.1 on page 8).

Ping the P-660R-TxC from a computer on the LAN. Make sure your computer’s

Ethernet adapter is installed and functioning properly. In the computer, click Start, (All)

Programs, Accessories and then Command Prompt. In the Command Prompt

window, type "ping" followed by the P-660R-TxC’s LAN IP address (192.168.1.1 is the

default) and then press [ENTER]. The P-660R-TxC should reply; otherwise see

Section 4.1 on page 8.

If the P-660R-TxC’s IP address has changed, then enter the new one as the URL.

Use Internet Explorer 6.0 and later or Netscape Navigator 7.0 and later with

JavaScript enabled.

Make sure you enter the password correctly (the field is case sensitive).

If you’ve forgotten the P-660R-TxC’s password, use the RESET button. Press the

button in for about 10 seconds (or until the POWER light starts to blink), then release

it. It returns the P-660R-TxC to the factory defaults (password is 1234, LAN IP address

192.168.1.1 etc.; see your User’s Guide for details).

Cannot access the

Internet.

Verify the Internet connection settings in the wizard. Make sure you entered the

correct user name and password if you are using PPPoE or PPPoA.

The P-660R-TxC stores the Internet connection settings that it detects using zero

configuration. Reset the P-660R-TxC to the factory defaults or manually configure it

for Internet access if you connect it to another DSL line with a different VPI and VCI.

P-660R-TxC Series Quick Start Guide

4Select Internet Protocol (TCP/IP) (under the General tab in

Windows XP) and click Properties.

5The Internet Protocol TCP/IP Properties screen opens (the

General tab in Windows XP).

6Select the Obtain an IP address automatically and Obtain

DNS server address automatically options.

7Click OK to close the Internet Protocol (TCP/IP) Properties

window.

8Click Close (OK in Windows 2000/NT) to close the Local Area

Connection Properties window.

9Close the Network Connections screen.

Viewing Your Product’s Certifications

1Go to www.zyxel.com.

2Select your product from the drop-down list box on the ZyXEL home page to go to that product's page.

3Select the certification you wish to view from this page.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ZyXEL Communications Netzwerk-Router Handbücher

ZyXEL Communications

ZyXEL Communications PMG2005-T20C Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG-420N Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 792H Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 2864I Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZYAIR B-2000 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG6615 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 100IH Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 642 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PRESTIGE 128 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications GS1510-16 - Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 650HW Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P650HW-DE Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications BG-418N v1 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG318S Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-2612HNU-F1 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyWALL 10 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 645R Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications MAX-200HW2 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 2864I Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 2602HWL-D3A Montageanleitung

ZyXEL Communications

ZyXEL Communications Prestige 642M series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZYWALL 2 WG Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-791R V2 Handbuch

ZyXEL Communications

ZyXEL Communications P-335U Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise

LevelOne

LevelOne FBR-1416 Bedienungsanleitung