ZyXEL Communications Prestige 2602HL Series Bedienungsanleitung

Prestige 2602H Series

ADSL VoIP IAD

Prestige 2602HL Series

ADSL VoIP IAD with Lifeline

Quick Start Guide

Version 3.40

3/2005

Prestige 2602H/HL Series Quick Start Guide

Overview

The Prestige 2602W or 2602HL ADSL VoIP IAD (Integrated Access Device) is an ADSL router with two phone

ports for Voice over IP (VoIP) calls. The Prestige also has a built-in switch. The Prestige 2602HL’s lifeline

feature adds regular phone services (that do not use the Internet).

See the User’s Guide for more information on all features.

The following figure shows your Prestige (A) connected to the Internet.

1 Hardware Connections

You need the following before you start:

Note: You may need your Internet access and voice account information.

Prestige Computer Telephone Power Adaptor

Ethernet Cable Telephone Cable

Prestige 2602H/HL Series Quick Start Guide

Do the following to make hardware connections for initial setup.

1DSL: Connect the Prestige to a telephone jack using the included telephone wire.

In the P2602HL, the DSL port handles both the ADSL and regular telephone

service connections. Connect the included v-shaped cable (with one gray wire

and one green wire) to the P2602HL's DSL port. Connect the gray wire to the

"modem" jack on a telephone or ISDN splitter (not included) and the green

wire to the splitter's "phone" jack or a telephone wall jack. This is a FXO

(Foreign Exchange Office) port.

Note: If you are using T-ISDN (UR-2), connect the green wire to the

(included) UR-2 to TAE connector before connecting it to the

telephone splitter's "phone" jack or a telephone wall jack.

2LAN: Use an Ethernet cable to connect a computer to a LAN port for initial

configuration and/or Internet access.

3 PHONE: Connect one or more analog telephones to these ports using telephone wires. These are FXS

(Foreign Exchange Station) ports.

4POWER:Use the included power adaptor to connect this power socket to an appropriate power source

(see the User’s Guide for power adaptors by region).

After you've made the connections, push in the power button to turn on the Prestige.

Prestige 2602H/HL Series Quick Start Guide

The PWR/SYS LED blinks during system testing and turns steady green if the testing is successful.

The LAN turns on if the LAN port is properly connected and blinks while sending or receiving data.

The DSL LED blinks during DSL line initialization and turns steady green when the Prestige has a DSL

connection.

The INTERNET LED turns steady green if the Prestige can access the Internet. It blinks when the Prestige is

sending or receiving data.

A PHONE LED turns steady green if a SIP account is registered for the corresponding PHONE port and blinks

when a call comes in or one of the connected phones is off hook.

•IfaPHONE LED is on, skip to Section 2.6 to see how to make calls through the Internet.

• If the INTERNET LED is on but the PHONE LEDs are off, go to Section 2.2 and access the web configurator.

Then go to Section 2.3 and configure the Voice Configuration wizard screen.

• If the INTERNET LED is off but the DSL LED is on, go to Section 2 to configure your Internet access settings.

• If the DSL LED is off, there is a problem with the hardware or the phone line connection to the ISP.

2 Initial Configuration

You may configure the Prestige for Internet access in any one of these ways:

• Zero Configuration

•Web Configurator Internet Access Wizard

Prestige 2602H/HL Series Quick Start Guide

2.1 Zero Configuration

Launch your web browser and

navigate to any web site (for

example, www.zyxel.com). The

Prestige automatically detects

and configures your Internet

connection. This may take about

two minutes.

If you have a PPPoE or PPPoA

connection, a screen displays

prompting you to enter your

Internet account information.

Enter the username, password and/or service name exactly as provided. Click Apply.

Note: Zero Configuration can only automatically configure the device for Internet access if you are

using PPPoE, PPPoA or ENET ENCAP encapsulation with a dynamically-assigned IP address

from your ISP. If you’re not using these Internet access settings, then access the web

configurator and use the wizard screens (see the following section) to configure your settings.

You also need to use the wizard screens if you want to configure the Prestige for making Internet

calls.

2.2 Web Configurator Access

1Launch your web browser. Enter 192.168.1.1 as

the web site address.

Note: If you do not see the next screen, then

please read Section 3.1.

2Click Login (the default password 1234

is already entered).

3Type a new

password

(retype it to

confirm) and

click Apply.

You then see

the main web

configurator

screen

Prestige 2602H/HL Series Quick Start Guide

2.3 Wizard Setup

1In the Site Map screen, click Wizard Setup.

Note: Enter the Internet access information given to you by your ISP exactly in each wizard screen and

then click Next to continue or click Back to return to the previous screen.

Screen information is not saved when you click Back.

2From the Mode drop-down list box, select Routing (default) if you want to use routing features such as

NAT.

Prestige 2602H/HL Series Quick Start Guide

3The next wizard screen varies depending on the Encapsulation you chose in the first wizard screen. From

the Network Address Translation drop-down list box, select SUA Only if you have one public IP address,

Full Feature if you have more than one public IP address (for translation) or None to disable NAT.

Note: You will only see the next two screens in Routing mode.

4Fill in the fields with information from your voice service provider. Leave the default settings in fields for

which no information was provided (except if otherwise specified).

Note: You should have a voice account already set up.

This screen configures SIP account 1. Use the VoIP screens to configure SIP account 2.

•PPPoE

Select Connect

on Demand

when you don't

want the

connection up

all the time and

specify an idle

time-out period

(in seconds) in

the Max. Idle

Timeout field.

Select Nailed-

Up Connection when you want your connection up all

the time. The Prestige will try to bring up the

connection automatically if it is disconnected.

•ENET

ENCAP

• PPPoA • RFC1483

Prestige 2602H/HL Series Quick Start Guide

If you have a SIP account like 1234@VoIP-

provider.com,“1234” would be the SIP Number

and “VoIP-provider.com” would be the SIP Service

Domain.

registrar server information, copy what you

entered in the SIP Server Address/Port fields.

Caller ID: If you want to show identification

information when you make VoIP calls, select

Send Caller ID.

5Verify your

LAN, WAN and

SIP settings.

To change the

LAN settings,

click Change

LAN

Configuration;

otherwise click

Save Settings

to save the

configuration

and go to the

final wizard

screen. If you

change the

Prestige’s LAN

IP address,

you must use the new IP address if you want to

access the web configurator again.

6Click Save Settings in the screen shown in step

4 to go to the final wizard screen.The Prestige

automatically tests the connection to the

computer(s) connected to the LAN port(s). To test

the connection from the Prestige to the ISP, click

Start Diagnose. Otherwise click Return to Main

Menu to go back to the main screen.

Prestige 2602H/HL Series Quick Start Guide

2.4 Speed Dial Configuration

Click Voice in the navigation panel and then Speed

Dial to display the following screen.

Speed dial provides shortcuts for dialing frequently

used (VoIP) phone numbers.

You can use speed dial entries for peer-to-peer

calls or SIP numbers that use letters.

Select a speed dial key combination.

Enter the SIP number of the party you will call and

a name to identify them.

Select Use Proxy if calls to this party use your SIP

account.

Select Non-Proxy (Use IP or URL) if calls to this

party use a different SIP server or go directly to

the callee’s VoIP phone (peer-to-peer). Enter the

SIP server’s or the party’s IP address or domain

name.

Click Add.

2.5 Lifeline Configuration (Prestige 2602HL)

With the Lifeline feature, you can use both VoIP and regular phone services.

Click Voice in the navigation panel and then

Lifeline.

PSTN Pre-fix Number: If you want to make a

regular call when the PWR/SYS LED is orange, dial

the prefix number that you configure here and the

phone number.

If the PWR/SYS LED is green or off, make regular

calls without a prefix number.

Relay to PSTN: Enter phone numbers that should

use the regular phone service (without the prefix

number). Do this for emergency numbers. The

numbers must be for regular phones (not VoIP

phones).

Click Apply.

Prestige 2602H/HL Series Quick Start Guide

2.6 Make Calls Through the Internet

When the VoIP LED turns on, your SIP account is registered successfully. Dial a numerical SIP number (like

“12345” for example) on your phone’s keypad.

Use speed dial entries (see Section 2.4) for peer-to-peer calls or SIP numbers that use letters. Dial the speed

dial entry on your telephone’s keypad.

Use your voice service provider’s dialing plan to call regular telephone numbers.

2.7 NAT

NAT (Network Address Translation - NAT, RFC 1631) means the translation of an IP address in one network to

a different IP address in another. For example, you could translate one public IP address to multiple private IP

addresses on your LAN (SUA Only).

2.8 Firewall

Click

Advanced

Setup and

then NAT to

open the

NAT-Mode

screen.

Select SUA

Only if you

have one public IP address and Full Feature if

you have multiple public IP addresses (for

address translation.

If you want to

make LAN

servers publicly

accessible,

configure SUA

server sets.

From the NAT -

Mode screen

click Edit Details

and fill in the

fields as shown.

Click Advanced Setup and

then Firewall to open the

firewall screen. The firewall

protects your LAN from

attacks from the Internet. No

traffic can enter your LAN

unless a request was

generated on the LAN first.

Click Default

Policy to see

rule direction

information.

You can also

disable the

firewall here if

you want.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ZyXEL Communications Netzwerk-Router Handbücher

ZyXEL Communications

ZyXEL Communications LTE3301-PLUS Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ES-2024PWR Handbuch

ZyXEL Communications

ZyXEL Communications P-660RU-Tx Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications AMG1202-T10B Handbuch

ZyXEL Communications

ZyXEL Communications P-660R-T1/T3 V2 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Dimension ES-124P Referenzhandbuch

ZyXEL Communications

ZyXEL Communications VES-1008 Handbuch

ZyXEL Communications

ZyXEL Communications Prestige 645R Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG6604 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-660RU-T1 v3 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ADSL VoIP IAD with 802.11g Wireless 2602HW... Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 100L Gebrauchsanweisung

ZyXEL Communications

ZyXEL Communications IES-2000 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-2602HWLNI Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications LTE Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications DIMENSION ES-1124 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ISDN 202H Plus Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-2602HWNLI-DxA Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 202H Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 650 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ES-3124F Handbuch

ZyXEL Communications

ZyXEL Communications VMG8623 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 2602HW Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications o2 HomeBox 6641 Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise

LevelOne

LevelOne FBR-1416 Bedienungsanleitung