ZyXEL Communications Prestige 28641 Bedienungsanleitung

Prestige 2864I

User’s Manual

Version 2.0

ZyXEL

ACCESSING THE INTERNET & INTRANET

ZyXEL Limited Warranty

ZyXEL warrants to the original end user (purchaser) that this product is

free from any defects in materials or workmanship for a period of up to

two (2) years from the date of purchase. During the warranty period,

and upon proof of purchase, should the product have indications of

failure due to faulty workmanship and/or materials, ZyXEL will, at its

discretion, repair or replace the defective products or components

without charge for either parts or labor, and to whatever extent it shall

deem necessary to restore the product or components to proper

operating condition. Any replacement will consist of a new or re-

manufactured functionally equivalent product of equal value, and will be

solely at the discretion of ZyXEL. This warranty shall not apply if the

product is modified, misused, tampered with, damaged by an act of

God, or subjected to abnormal working conditions.

Note:Repair or replacement, as provided under this warranty, is the

exclusive remedy of the purchaser. This warranty is in lieu of all other

warranties, express or implied, including any implied warranty of

merchantability or fitness for a particular use or purpose. ZyXEL shall in

no event be held liable for indirect or consequential damages of any

kind or character to the purchaser.

To obtain the services of this warranty, contact ZyXEL’s Service

Center, refer to the separate Warranty Card for your Return Material

Authorization number (RMA). Products must be returned Postage

Prepaid. It is recommended that the unit be insured when shipped. Any

returned products without proof of purchase or those with an out-dated

warranty will be repaired or replaced (at the discretion of ZyXEL) and

the customer will be billed for parts and labor. All repaired or replaced

products will be shipped by ZyXEL to the corresponding return

address, Postage Paid (USA and territories only). If the customer

desires some other return destination beyond the U.S. borders, the

customer shall bear the cost of the return shipment. This warranty gives

iii

you specific legal rights, and you may also have other rights which vary

from state to state.

The contents of this book may not be reproduced (in any part or as a

whole) or transmitted in any form or by any means without the written

permission of the publisher.

Note:ZyXEL does not assume any liability arising out of the

application or use of any products, or software described herein.

Neither does it convey any license under its patent rights nor the patents

rights of others. ZyXEL further reserves the right to make changes in

any products described herein without notice. This document is subject

to change without notice.

Acknowledgments

Trademarks mentioned in this manual are used for informational

purposes only.

Trademarks are properties of their respective owners.

FCC Part 15 Information

This device complies with Part 15 of FCC rules. Operation is subject to

the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including

interference that may cause undesired operations.

This equipment has been tested and found to comply with the limits for

a CLASS B digital device pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference in a commercial environment. This equipment generates,

uses, and can radiate radio frequency energy, and if not installed and

used in accordance with the instructions, may cause harmful interference

to radio communications.

If this equipment does cause harmful interference to radio/television

reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or

more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and the receiver.

•Connect the equipment into an outlet on a circuit different from that

to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party

responsible for compliance could void the user’s authority to operate

the equipment. Shielded RS-232 cables are required to be used to

ensure compliance with FCC Part 15, and it is the responsibility of the

user to provide and use shielded RS-232 cables.

Information for Canadian Users

The Industry Canada label identifies certified equipment. This

certification means that the equipment meets certain telecommunications

network protective, operation, and safety requirements. The Industry

Canada does not guarantee that the equipment will operate to a user’s

satisfaction.

Before installing this equipment, users should ensure that it is permissible

to be connected to the facilities of the local telecommunications

company. The equipment must also be installed using an acceptable

method of connection. In some cases, the company’s inside wiring

associated with a single line individual service may be extended by

means of a certified connector assembly. The customer should be

aware that the compliance with the above conditions may not prevent

degradation of service in some situations.

Repairs to certified equipment should be made by an authorized

Canadian maintenance facility designated by the supplier. Any repairs or

alterations made by the user to this equipment, or equipment

malfunctions, may give the telecommunications company cause to

request the user to disconnect the equipment.

For their own protection, users should ensure that the electrical ground

connections of the power utility, telephone lines, and internal metallic

water pipe system, if present, are connected together. This precaution

may be particularly important in rural areas.

Caution: Users should not attempt to make such connections

themselves, but should contact the appropriate electrical

inspection authority, or electrician, as appropriate.

This digital apparatus does not exceed the class A limits for radio noise

emissions from digital apparatus set out in the radio interference

regulations of Industry Canada. The declarations of CE marking:

The Prestige has been approved for connection to the Public Switched

Telecommunication Network using interfaces compatible with ITU-TSS

recommendation I.420 (Basic Rate ISDN user access). The Prestige

complies with the following directives:

•The Council Directive 89/336/EEC of 3 May 1992 on the

approximation of the laws of the member states relation to Electro

Magnetic Compatibility. (EMC Directive)

•Council Directive 91/263/EEC of 29 April 1991 on the

approximation of the laws of the Member States concerning

telecommunication terminal equipment. (The Telecom Terminal

Equipment Directive)

•93/68/EEC of 22 July 1993 amending the Directives 89/336/EEC,

91/263 /EEC and 92/31/EEC.(Marking Directive)

•The Council Directive 92/31/EEC of 28 April 1992 amending

directive on the approximation of the laws of the member states

relating to EletoMagnetic Compatibility.

Contacting ZyXEL

If you have questions about your ZyXEL product or desire assistance,

contact ZyXEL Communications Corporation in one of the following

ways:

•Phone: In North America call between 8:00 AM and 5:00 PM

PST at (714) 693-0808

Outside North America, you can dial +886-3-5783942 EXT 252

between 8:00AM and 5:00PM Taiwan time (GMT +8:00).

•Fax: ZyXEL in North America: (714) 693-8811 or Taiwan: +886-

3-5782439

•E-mail:

•Sales inquiries: [email protected] in North America.

[email protected] outside North America.

vii

•Technical support: [email protected] in North America.

[email protected] outside North America.

•Product information: Visit our site on the World Wide Web:

http://www.zyxel.com.

•FTP: Information , such as ZyXEL software and ROM updates for

North America can be found at this FTP address: ftp.zyxel.com

For European and Asian versions and related files, use the address:

ftp.zyxel.co.at

•Postal Service: You can send written communications at the

following address:

ZyXEL Communications Corporation

6, Innovation Road II, Science-Based Industrial Park

Hsinchu, Taiwan 300, R.O.C.

ZyXEL Communications Inc.

4920 E. La Palma Avenue

Anaheim, CA92807, U.S.A.

viii

Contents

ZyXEL Limited Warranty ii

Acknowledgments iii

FCC Part 15 Information iii

Information for Canadian Users iv

Contacting ZyXEL vi

1Introduction 1

Features 1

Ease of Installation 1

ISDN Basic Rate Interface (BRI) 2

Built-in V.34 Modem 2

Multiple Networking Protocol Support 2

Standard Phone Jack 2

Dial On Demand 2

Bandwidth On Demand 3

Full Network Management 3

RADIUS (Remote Authentication Dial In User Service) 3

PPP Security 3

DHCP Support (Dynamic Host Configuration Protocol) 3

Call Control 4

Data Compression 4

Networking Compatibility 4

Applications For Your Prestige 4

Internet Access 4

Internet Single User Account (SUA) 4

Multiprotocol LAN-to-LAN Connection 5

Telecommuting Server 5

Mobile Users with V.34 Modems 5

What This Manual Covers 5

What This Manual Doesn’t Cover 6

Other Resources 6

Packing List 7

Additional Installation Requirements 7

2Before You Begin 9

Road Map and Flow 9

Completing the Worksheet 10

Ordering Your ISDN Line 10

Collecting General Setup Information 11

Collecting ISDN Phone Line Information 12

Collecting Ethernet Setup Information 14

3Installation 21

A Warning On Connection Cables 22

Connecting Your Computer and Your Prestige 22

Connecting the RS-232 Cable to your Prestige 22

Connecting an ISDN Line to your Prestige 22

Connecting a Telephone/Fax to your Prestige 23

Connecting an Ethernet Cable to your Prestige 23

Connecting a Power Adapter to your Prestige 24

Prestige Front Panel 24

Powering On Your Prestige 26

Navigating Through the System Management Terminal

Interface 27

System Management Terminal Interface Summary 28

General Setup 29

ISDN Setup 31

North American ISDN 31

DSS1 & 1TR6 ISDN 33

Ethernet Setup 36

General Ethernet Setup 36

TCP/IP Ethernet Setup and DHCP 37

Novell IPX Ethernet Setup 40

Bridge Ethernet Setup 40

4Configuring for Internet Access 41

IP Addresses and the Internet 42

Internet Access Configuration 43

Single User Account 46

Configuration for Single User Account 48

Configuring Backup ISP Accounts 48

5Remote Node Configuration 51

Bandwidth on Demand 57

Editing PPP Options 59

6Dial-In Configuration 61

Telecommuting 62

Dial-In Server Application 62

Default Dial-In Setup 63

Dial-In Users Setup 67

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise

LevelOne

LevelOne FBR-1416 Bedienungsanleitung