ZyXEL Communications PRESTIGE 660 HW Series Bedienungsanleitung

ZyXEL Prestige 660HW Series

ADSL Router with Wireless + Firewall

Installation Guide

Version 3.40

5/2005

P-660HW Series Quick Start Guide

Overview

The P-660HW is an ADSL Internet gateway with IEEE 802.11g

wireless capability and a 4-port built-in switch. You may need your

Internet access information. The P-660HW is referred to as “the

Prestige” in this guide.

See your User’s Guide for background information on all features.

This guide is divided into the following sections.

1 Hardware Connections

You need the following before you start.

1Hardware Connections

2Configuration for Internet Access

3Wireless Configuration

4NAT

5Firewall

6Troubleshooting

Prestige Computer(s) Ethernet Cable Telephone Cable Power Adaptor

P-660HW Series Quick Start Guide

1 DSL: Connect the Prestige to a telephone jack using a telephone wire.

2 LAN: Use an Ethernet cable to connect a computer to a LAN 10/100M port for initial configuration and/or

Internet access.

3 POWER: Use the included power adaptor to connect the POWER socket to an appropriate power source

(see the User’s Guide for power adaptors specifications by region).

After you’ve made the connections, push in the power button to turn on the Prestige. Look at the front panel

LEDs. The PWR/SYS LED blinks while performing system testing. The PWR/SYS and/or WLAN LEDs then

turn steady on if the testing is successful. The LAN LED turns on if the LAN port is properly connected.

2 Configuration for Internet Access

You may configure the Prestige for Internet access in any one of these ways:

P-660HW Series Quick Start Guide

• Configuration Genie

• Zero Configuration

• Web Configurator Internet Access Wizard

2.1 Configuration Genie

• From the included CD, click “Multimedia Auto Provisioner” (the installation and configuration assistant) and

then click “Installation Tutorial”. After you’ve viewed the tutorial, click “Configuration Genie” at the end of the

installation tutorial or from “Multimedia Auto Provisioner” in the CD.

2.2 Zero Configuration

Launch your web browser and

navigate to any web site (for

example, www.zyxel.com). The

Prestige automatically detects

and configures your Internet

connection. This may take about

two minutes.

If you have a PPPoE or PPPoA

connection, a screen displays

prompting you to enter your

Internet account information. Enter the username, password and/or service name exactly as provided. Click

Apply.

2.3 Accessing the Web Configurator

1Launch your web browser. Enter “192.168.1.1” as the

web site address.

Note: If you do not see the next screen, then please

read Section 6.1 on page 10

2Click Login. 3Type a new

password

(retype it to

confirm) and

click Apply.

Otherwise click

Ignore. You

then see the

main web

configurator

screen

P-660HW Series Quick Start Guide

4In the MAIN MENU screen, click WIZARD SETUP.

2.3.1 Internet Access Setup

Note: Enter the Internet access information given to you by your ISP exactly in each wizard screen and

then click Next to continue or click Back to return to the previous screen.

Screen information is not saved when you click Back.

1From the Mode drop-down list box, select Routing (default) if you want to use routing features such as

NAT.

P-660HW Series Quick Start Guide

2The next wizard screen varies depending on the Encapsulation you chose in the first wizard screen. From

the Network Address Translation drop-down list box, select SUA Only if you have one public IP address,

Full Feature if you have more than one public IP address (for translation) or None to disable NAT.

Note: You will only see the next two screens in Routing mode.

•PPPoE.

Select Connect

on Demand

when you don't

want the

connection up

all the time and

specify an idle

time-out period

(in seconds) in

the Max. Idle

Timeout field.

Select Nailed-

Up Connection when you want your connection up all

the time. The Prestige will try to bring up the

connection automatically if it is disconnected.

•ENET

ENCAP

• PPPoA • RFC1483

P-660HW Series Quick Start Guide

3 Wireless Configuration

WPA-PSK encryption is preferred to WEP because it has user authentication and improved data encryption. If

you don’t have WPA-capable wireless clients, configure WEP encryption.

Note: Wireless clients and the Prestige must use the same SSID, channel ID, WEP or WPA-PSK key (if

enabled).

3Verify your

LAN and

WAN

settings.

To change the

LAN settings,

click Change

LAN

Configuration;

otherwise click

Save Settings to

save the

configuration

and go to the

final wizard

screen.If you

change the

Prestige’s LAN IP address, you must use the new IP

address if you want to access the web configurator

again.

4Click Save Settings in the screen shown in step

3 to go to the final wizard screen.The Prestige

automatically tests the connection to the

computer(s) connected to the LAN port. To test

the connection from the Prestige to the ISP, click

Start Diagnose. Otherwise click Return to Main

Menu to go back to the main screen.

P-660HW Series Quick Start Guide

4 NAT

NAT (Network Address Translation - NAT, RFC 1631) means the translation of an IP address in one network to

a different IP address in another. For example, you could translate one public IP address to multiple private IP

addresses on your LAN (SUA Only).

1Click the Wireless LAN link under

Advanced Setup.

2Click 802.1x/WPA.

Select

Authentication

Required, then

select WPA-

PSK and then

type a Pre-

shared Key.

3Click Advanced Setup, Wireless LAN, Wireless. In the ESSID field, enter up to 32 printable characters to

uniquely identify the Prestige. If you didn’t configure WPA-PSK, configure WEP in this screen (not visible

if you’ve configured WPA-PSK).

P-660HW Series Quick Start Guide

5 Firewall

The firewall is already enabled by default on the Prestige.

Click

Advanced

Setup and

then NAT to

open the

NAT-Mode

screen.

Select SUA

Only if you

have one public IP address and Full Feature if

you have multiple public IP addresses (for

address translation).

If you have

servers on your

LAN, configure

an SUA server

set to have

them visible to

the outside.

From the NAT -

Mode screen

click Edit

Details and fill

in the fields as

shown.

Click Advanced Setup and

then Firewall to open the

firewall screen. The firewall

protects your LAN from

attacks from the Internet. No

traffic can enter your LAN

unless a request was

generated on the LAN first.

Click Default

Policy to see

rule direction

information.

You can also

disable the

firewall here

if you want.

P-660HW Series Quick Start Guide

6 Troubleshooting

6.1 Set Up Your Computer’s IP Address

This section shows you how to set your Windows NT/2000/XP computer to automatically get an IP address.

This ensures that your computer can with your Prestige. Refer to your User’s Guide for detailed IP address

configuration for other Windows and Macintosh computer operating systems.

1In Windows XP, click start, Control Panel. In Windows 2000/NT, click Start, Settings, Control Panel.

2In Windows XP, click Network Connections. In Windows 2000/NT, click Network and Dial-up

Connections.

3Right-click Local Area Connection and then click Properties.

PROBLEM CORRECTIVE ACTION

None of the LEDs turn on when

you connect the Prestige’s

power.

Make sure that you have the correct power adaptor connected to the Prestige, it

is plugged into an appropriate power source and the Prestige is turned on.

Check all cable connections. If the LEDs still do not turn on, you may have a

hardware problem. In this case, you should contact your local vendor.

Cannot access the Prestige

from my computer.

Check the cable connection from your computer to the Prestige.

Make sure your computer’s IP address is in the same subnet as the Prestige’s

IP address (see Section 6.1 on page 10).

Ping the Prestige from a computer on the LAN. Make sure your computer’s

Ethernet adapter is installed and functioning properly. In the computer, click

Start, (All) Programs, Accessories and then Command Prompt. In the

Command Prompt window, type "ping" followed by the Prestige’s LAN IP

address (192.168.1.1 is the default) and then press [ENTER]. The Prestige

should reply; otherwise see Section 6.1 on page 10.

If the Prestige’s IP address has changed, then enter the new one as the URL.

Use Internet Explorer 6.0 and later or Netscape Navigator 7.0 and later with

JavaScript enabled.

Make sure you enter the password correctly (the field is case sensitive).

If you’ve forgotten the Prestige’s password, use the RESET button. Press the

button in for about 10 seconds (or until the PWR/SYS LED starts to blink), then

release it. It returns the Prestige to the factory defaults (password is 1234, LAN

IP address 192.168.1.1 etc.; see your User’s Guide for details).

Cannot access the Internet. Verify the Internet connection settings in the wizard. Make sure you entered the

correct user name and password if you are using PPPoE or PPPoA.

For wireless clients, check that both the Prestige and wireless client(s) are using

the same SSID, channel and WEP or WPA-PSK keys (if configured).

Andere Handbücher für PRESTIGE 660 HW Series

Inhaltsverzeichnis

Andere ZyXEL Communications Netzwerk-Router Handbücher

ZyXEL Communications

ZyXEL Communications MAX-200HW2 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Dimension GS-3012 Handbuch

ZyXEL Communications

ZyXEL Communications NBG6615 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 782R Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ES-2024A Handbuch

ZyXEL Communications

ZyXEL Communications ZyXEL ZyWALL P1 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyXEL Dimension ES-3124-4F Handbuch

ZyXEL Communications

ZyXEL Communications P650HW Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications XMG3512-B10A Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-660R Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications DX3301-T0 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG6604 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-660HN-T1H Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-660R-T1 v3 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-791R V2 Handbuch

ZyXEL Communications

ZyXEL Communications PM7320-B0 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PMG2005-T20B Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PLA-470 v2 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 645R Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG318S v2 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyXEL Prestige 202 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications LTE Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications 660H/HW(-I) Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PLA5256 Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise

LevelOne

LevelOne FBR-1416 Bedienungsanleitung