ZyXEL Communications SHD2110 Bedienungsanleitung
www.zyxel.com
Quick Start Guide
SHD2110/3110
Power On/Off Switch
Power On/Off Switch with
Power Metering
Version 1.00
Edition 1, 7/2011
2011 ZyXEL Communications Corporation
C
2
3
Overview
The SHD2110/3110 is a plug-in Power On/Off Switch and the SHD3110
supports power metering. It is a Z-WaveTM enabled transceiver which is
fully compatible with any Z-Wave enabled network.
The SHD2110/3110 can be connected to a maximum resistive electricity
load of 3000 watts.
The SHD2110 has fuse protection when overload happens while the
SHD3110 is able to detect overload. The SHD3110 will be disabled and
its On/Off button will be locked. The LED will flash quickly for 30
seconds. Unplug and re-connect the SHD3110 to reset it.
Placing the SHD2110/3110
1. Do not place the SHD2110/3110 facing direct sunlight, or in a humid,
or dusty area.
2. The suitable temperature for the SHD2110/3110 is 0°C~40°C.
3. Do not place the SHD2110/3110 near flammable substances or any
source of heat (e.g. fires, radiators, boiler... etc).
4. It is normal that the SHD2110/3110 becomes a bit warm during use.
SHD2110 SHD3110
On/Off Button &
LED Indicator
ENGLISH
44
Installation
1. Plug the SHD2110/3110 into a wall outlet near the appliance to be
controlled.
2. Plug the appliance into the SHD2110/3110. Ensure the power load
does not exceed 3000 watts.
3. Turn the appliance on.
4. The ON/OFF button on the SHD2110/3110 can now control the power
of your appliance. Press it to manually turn the appliance on/off.
Adding to Z-Wave Network
When power is initially applied, the LED on the front of the SHD2110/
3110 flashes on and off repeatedly at a 2-second interval. This implies
that it has not been allocated a node ID and cannot work with Z-Wave
enabled devices.
You can use the On/Off button in front of the SHD2110/3110 to include,
exclude, associate with a Z-Wave Network, or reset.
Function Description LED Indication
No node ID The Z-Wave Controller does
not allocate a node ID to the
SHD2110/3110.
On and off repeatedly at a 2-
second interval
Inclusion 1. Have the Z-Wave Controller
enter inclusion mode. The LED is on if you press On.
It is off if you press Off.
2. Press the On/Off button 3
times within 1.5 seconds to
enter inclusion mode.
5
Note: See the User’s Guide for the SHD2110/3110’s advanced programming.
Exclusion 1. Have the Z-Wave Controller
enter exclusion mode. The LED is on if you press On.
It is off if you press Off.
2. Press the On/Off button 3
times within 1.5 seconds to
enter exclusion mode.
3. Node ID has been
excluded. On and off repeatedly at a 2-
second interval
Reset 1. Press the On/Off button 3
times within 1.5 seconds. The LED is on if you press On.
It is off if you press Off.
2. Within 1 second, press
the On/Off button for 5
seconds until the LED is off.
3. Node ID has been
excluded, restores to
factory default.
On and off repeatedly at a 2-
second interval
Association 1. Have the Z-Wave Controller
enter association mode. The LED is on if you press On.
It is off if you press Off.
2. Or press On/Off button 3
times within 1.5 seconds to
enter association mode.
3. There are two groupings - 1
and 2. (Refer to Z-Wave's
Groupings in the User’s
Guide)
• The Z-Wave Controller will display whether the inclusion/exclusion of the
node ID has succeeded or failed.
Function Description LED Indication
66
Socket Type
Refer to the following for the socket type suited for your country:
SHD2110
SHD3110
Make sure that the current used by the plug of the appliance is
under 14.5A and has the same head as the enclosed plug before
inserting into the socket.
7
Toubleshooting
Symptom Possible Cause Recommendation
The SHD2110/
3110 is not
working.TheLED
display is off.
1. The SHD2110/3110 is
not plugged to an
electrical outlet
properly.
Check the power connections.
2. A malfunction has
occurred. Contact your vendor for
repairment.
I cannot control
the appliance
plugged to the
SHD2110/3110.
Check if the appliance
plugged to the SHD2110/
3110 has its own power
switch.
Set the appliance’s power
switch to On.
The Z-Wave
Controller cannot
control the
SHD2110/3110.
1. The SHD2110/3110 is
notassociated withthe
Z-Wave Controller.
Associate the SHD2110/3110
with the Z-Wave Controller.
See Adding to Z-Wave
Network.
2. There is frequency
interference. Wait for a while and try again.
(SHD3110 only)
The LED kept
flashing for 30
seconds and the
modulecannotbe
controlled.
An overload has
occurred. Remove the appliance
attached to the SHD3110.
Check the electricity load of
the appliance. It cannot
exceed 3000W.
8
ENGL
I
SH
DEUTSCH
ESPAÑOL
FRANÇAIS
Green Product
Declaration
Ro
HS Directive 2002/95/EC
W
EEE Directive 2002/96/EC
(W E
EE: Waste Electrical and Electronic
Eq
uipment)
20
08/34/EC
De
claration Signature:
Na
me/Title:
Raymond Huang
/
Quality & Customer Service Division Assistant VP
Date (yyyy/mm/dd): 2011/1/24
Green Product
Declaration
Ro
HS Directive 2002/95/EC
WE
EE Directive 2002/96/EC
(W EE
E: Waste Electrical and Electronic
Eq
uipment)
2008/34/EC
Un
terschrift des Erklärenden:
Na
me/Titel:
Ra
ymond Huang/
Quality & Customer Service Division Assistant VP
Datum (JJJJ/MM/TT): 2011/1/24
Declaración de Producto Ecológico
Di
rectiva RoHS 2002/95/EC
Di
rectiva REEE 2002/96/EC
(REEE :
Residuos de Equipos
El
éctricos y Electrónicos)
2008/34/EC
Fir
ma de declaración:
Nom
bre/Título:
Raymond Huang
/
Quality & Customer Service Division Assistant VP
Fecha (aaaa/mm/dd): 2011/1/24
Déclaration de Produit
Green
Di
rective RoHS 2002/95/EC
Di
rective DEEE 2002/96/EC
(D
EEE : Déchets des Equipements
Elec
triques et Electroniques)
2008/34/EC
Sig
nature de la déclaration :
Nom/
Tit r e :
Raymond Huang
/
Quality & Customer Service Division Assistant VP
Date (aaaa/mm/jj) : 2011/1/24
ITALIANO
NEDERLANDS
SVENSKA
Dichiarazione Green
Product
Dire
ttiva RoHS 2002/95/CE
Dire
ttiva RAEE 2002/96/CE
(RA
EE: Rifiuti di Apparecchiature
Elet
triche ed Elettroniche)
20
08/34/EC
Fi
rma dichiarazione:
No
me/titolo:
Raymond Huang
/
Quality & Customer Service Division Assistant VP
Dat
a (aaaa/mm/gg): 2011/1/24
Productmilieuverklaring
Ro
HS-richtlijn 2002/95/EC
AEE
A-richtlijn 2002/96/EC
(A
EEA: Afgedankte Elektrische en
El
ektronische Apparaten)
2008/34/EC
Ve
rklaringshandtekening:
Na
am/titel:
Raymond Huang
/
Quality & Customer Service Division Assistant VP
Datum(j
jjj/mm/dd): 2011/1/24
Miljödeklaration
RoHS D
irektiv 2002/95/EC
WEEE Dir
ektiv 2002/96/EC
(W
EEE: hantering av elektriskt och
el
ektroniskt avfall)
2008/34/EC
Dekl
aration undertecknad av:
Nam
n/Titel:
Raymond Huang
/
Quality & Customer Service Division Assistant VP
Da
tum (åååå/mm/dd): 2011/1/24
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere ZyXEL Communications Schalten Handbücher
ZyXEL Communications
ZyXEL Communications MGS-3712 Bedienungsanleitung
ZyXEL Communications
ZyXEL Communications GS-105B v2 Bedienungsanleitung
ZyXEL Communications
ZyXEL Communications ES1100-16 Bedienungsanleitung
ZyXEL Communications
ZyXEL Communications MS-7206 Bedienungsanleitung
ZyXEL Communications
ZyXEL Communications PMG1006-B20A Bedienungsanleitung
ZyXEL Communications
ZyXEL Communications 43222612 Bedienungsanleitung
ZyXEL Communications
ZyXEL Communications MES-2110 Handbuch
ZyXEL Communications
ZyXEL Communications GS1900 Series Bedienungsanleitung
ZyXEL Communications
ZyXEL Communications PRESTIGE 128MH Bedienungsanleitung
ZyXEL Communications
ZyXEL Communications EM-422/EM-412 Bedienungsanleitung
ZyXEL Communications
ZyXEL Communications Dimension GS-2024 Bedienungsanleitung
ZyXEL Communications
ZyXEL Communications GS-105B Bedienungsanleitung
ZyXEL Communications
ZyXEL Communications ZyXEL Dimension ES-2724 Referenzhandbuch
ZyXEL Communications
ZyXEL Communications XS1930-12HP Bedienungsanleitung
ZyXEL Communications
ZyXEL Communications RGS Series Bedienungsanleitung
ZyXEL Communications
ZyXEL Communications Dimension GS-2024 Bedienungsanleitung
ZyXEL Communications
ZyXEL Communications GS-4012F Bedienungsanleitung
ZyXEL Communications
ZyXEL Communications AVS108 Bedienungsanleitung
ZyXEL Communications
ZyXEL Communications PMG1006-B20A Bedienungsanleitung
ZyXEL Communications
ZyXEL Communications GS1920v2 Series Bedienungsanleitung
