ZyXEL Communications G-1000 V2 Bedienungsanleitung

ZyXEL G-1000 v2

Wireless-11g Access Point

Quick Start Guide

Version 3.6

Edition 1

2/2006

ZyXEL G-1000 v2 Quick Start Guide

Overview

The ZyXEL G-1000 v2 is a wireless LAN access

point with integrated wireless security features.

This Quick Start Guide introduces the G-1000 v2

and shows you how to use the web configurator

wizard. See your User's Guide for configuration

details and background information on all G-1000 v2

features.

1 Hardware Installation

Follow the steps below to connect the supplied antennas.

1Locate the antenna connectors on the sides of your G-1000 v2.

2Screw the antennas clockwise onto the antenna connectors. The

antennas should be perpendicular to the ground and parallel to

each other.

Note: Make sure the antennas are securely screwed onto the

antenna connectors.

2 Hardware Connections

1ETHERNET: Use an Ethernet cable to connect

at least one computer for initial G-1000 v2

configuration. These ports are auto-negotiating

(can connect at 10 or 100Mbps) and auto-

crossover (automatically adjust to the type of

Ethernet cable you use (straight-through or

crossover)).

2 POWER 12VDC: Use the included power

adaptor to connect the power socket to an

appropriate power source.

RESET: You only need to use this button if you've

forgotten the G-1000 v2's password. It returns the

G-1000 v2 to the factory defaults (password is

1234 and LAN IP address 192.168.1.2). Refer to

the User's Guide for more information.

After you’ve made the connections look at the front panel lights.

ZyXEL G-1000 v2 Quick Start Guide

After you’ve made the connections look at the front panel lights.

•ThePWR light turns steady on when the power adaptor is connected.

• TheSYS light blinks while performing system testing and then turns

steady on if the testing is successful.

•TheZyAIR (breathing) light turns steady on while the wireless card on

the G-1000 v2 is working.

•TheETHN light turns on, if the port is properly connected. If the light is

not on, check your connections and inspect your cables for damage. If

you still have problems, contact your local vendor.

3 Accessing the Web Configurator.

The default IP address of the G-1000 v2 is 192.168.1.2. Before directly entering the G-1000 v2 IP address into your

web browser, you must make sure that your computer and the G-1000 v2 are in the same subnet. This section

shows you how to set your Windows NT/2000/XP computer to have an IP address in the same subnet as the G-

1000 v2. Refer to your User’s Guide for detailed IP address configuration for other Windows, Macintosh and Linux

computer operating systems.

1In Windows XP, click Start, Control Panel. In Windows 2000/NT, click Start, Settings, Control Panel.

2In Windows XP, click Network Connections. In Windows 2000/NT, click Network and Dial-up

Connections.

3Right-click Local Area Connection and then click Properties.

ZyXEL G-1000 v2 Quick Start Guide

4Select Internet Protocol (TCP/IP) (under the General

tab in Win XP) and click Properties.

5The Internet Protocol TCP/IP Properties screen

opens (the General tab in Windows XP).

6Select Use the following IP address and enter an IP

address from 192.168.1.1 to 192.168.1.254 excluding

192.168.1.2 (the G-1000 v2) and any other IP

addresses in the range already being used by a

device on your network.

7Click OK to close the Internet Protocol (TCP/IP)

Properties window.

8Close the Local Area Connection Properties window

and then the Network Connections screen.

9Open your browser, and enter “192.168.1.2” as

the website address.

4 Web Configurator Login

1Enter the password 1234. Then, click Login.2Follow the directions in this screen.

ZyXEL G-1000 v2 Quick Start Guide

5 Wizard Setup

The wizard is divided into three parts.

Follow the directions in the wizard to

setup:

• System information

• Wireless LAN

• IP address assignment

1Click Next to begin the wizard.

3On this screen you can access the wizard setup

or the advanced setup.

Click Go to Wizard setup for initial configuration

of your G-1000 v2.

ZyXEL G-1000 v2 Quick Start Guide

2In this screen enter the system

name and the domain name of your

ISP (if necessary). Click Next to

continue.

3Use the second wizard screen to

set up the wireless LAN.

Name(SSID) is a unique name to

identify the G-1000 v2 in a wireless

LAN. Enter a descriptive name.

The range of radio frequencies used

by IEEE 802.11b/g wireless devices

is called a channel. Use the Channel

Selection drop-down list box to

select a channel that is not already in

use by a neighboring device.

In the Security list box:

• Choose None to have no wire-

less LAN security configured.

• Choose Basic(WEP) security if

you want to configure WEP

Encryption parameters.

• Choose Extend(WPA-PSK with

customized key) or

Extend(WPA2-PSK with cus-

tomized key) security to config-

ure a pre-shared key.

ZyXEL G-1000 v2 Quick Start Guide

Note: If you do not enable any wireless security on your G-1000 v2, your network is accessible to any

wireless networking device that is within range.

4If you chose Basic(WEP) security in the

previous screen to setup WEP

encryption parameters:

Enter a Passphrase (up to 32 printable

characters) and click Generate and the

G-1000 v2 automatically generates a

WEP key.

Enter a manual key in a Key field and

select ASCII or Hex WEP key input

method.

Select 64-bit WEP or 128-bit WEP from

the WEP Encryption drop-down list box

and click Next to continue or Back to go

back to the previous screen.

Click Next to continue.

5If you chose Extend(WPA-PSK with

customized key) or Extend(WPA2-

PSK with customized key), you need

to configure a pre-shared key.

Enter a password made up of both

numbers and letters which is at least 8

characters long.

Click Next to continue.

ZyXEL G-1000 v2 Quick Start Guide

6Select your IP address

assignment.

Select Obtain IP Address

Automatically if your G-1000 v2

is using a dynamically assigned

IP address from a DHCP server.

Select Use fixed IP address if

your G-1000 v2 is using a static

IP address.

7Click Apply to complete the

wizard and implement the settings

on your device.

8You have completed the wizard

setup. Click Finish on the next

screen to exit the wizard.

Note: If you changed the SSID on

your device or implemented

any security, then you will have

to make the corresponding

changes on your wireless

stations to reconnect to the AP.

If you changed the IP address

of your G-1000 v2 or if an IP

address is assigned to the G-

1000 v2 automatically, you can

access the device by using the

new IP address or typing

“http://zyxelXXXX”

(where XXXX are the last four digits of your devices MAC address) in your browser. The MAC

address can be found on the back label of your G-1000 v2.

ZyXEL G-1000 v2 Quick Start Guide

6 Deployment

1Disconnect the G-1000 v2 from the computer and place it where you want to deploy it.

The best location is elevated, such as wall mounted, at the center of your wireless coverage area and within

line of sight of all the wireless devices.

2Connect an Ethernet cable from your G-1000 v2 to a LAN port on your router, switch or hub.

3Connect the power adaptor to your G-1000 v2 and plug the power adaptor in to the power outlet. The

PWR, SYS, ETHN and ZyAIR lights should light up.

7 Verify Wireless Connection

Using a computer with an 802.11g or 802.11b wireless adapter, verify wireless connection by using an Internet

browser to connect to the Internet.

If you cannot connect, see the troubleshooting section of this guide.

8 Hardware Mounting

In general, the best location for the access point is at the center of your intended wireless coverage area. For

better performance, mount the G-1000 v2 high up free of obstructions.

8.1 Wall-mounted

Follow the steps to attach your G-1000 v2 to a wall.

1Locate a high position on the wall that is free of obstructions.

2Connect two screws (not included) in the wall 80mm apart. You can use the diagram at the end of this

guide to help you mark the screw holes correctly. Use screws with 6mm ~ 8mm (0.24" ~ 0.31") wide heads.

Do not screw the screws all the way into the wall. Leave a small gap between the head of the screws and

the wall.

Note: Make sure the screws are securely fixed to the wall and strong enough to hold the weight of the

G-1000 v2 with the connection cables.

3Adjust the cables.

ZyXEL G-1000 v2 Quick Start Guide

4Align the holes on the back of the G-1000 v2 with the screws on the wall. Hang the G-1000 v2 on the

screws.

Andere Handbücher für G-1000 V2

Inhaltsverzeichnis

Andere ZyXEL Communications Drahtloser Zugangspunkt Handbücher

ZyXEL Communications

ZyXEL Communications WAP3205 v2 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NWA-3166 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NWA5301-NJ Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications G-570S Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications WAC6303D-S Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications nwa1100-n Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NWA-3550 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NWA1123-AC HD Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ARMOR X1 WAP6806 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyAIR G-5100 Handbuch

ZyXEL Communications

ZyXEL Communications P-3202H-Bb Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications HD Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZYAIR G-1000 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications wac series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NWA-8500 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications WAC6000 SERIES Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ARMOR X1 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications nwa series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NWA 1121-NI - Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PLA4225 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NWA1100-NH Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NWA5160N Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyXEL ZyAIR B-1000 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications G-1000 V2 Bedienungsanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation NSM2 Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung