ZyXEL Communications C1100Z Bedienungsanleitung

www.zyxel.com

C1100Z

802.11n Wi-Fi Router

Version 1.00

Edition 1, 04/2015

Default Login Details

LAN IP Address http://192.168.0.1

User Name admin

Password Check the device label

Quick Start Guide

Device Panels

POWER

DSL

INTERNET

ETHERNET

USB SLOT

POWER

RESET

DSL PORT

USB

ETHERNET

1-4

WI-FI 2.4G

WAN/LAN

WAN PORT

PORTS 1-4

WPS

BUTTON

PHONE

PORT

Overview

The Device is a VDSL2 router and Ethernet gateway with a four-port

built-in Ethernet switch and IEEE 802.11n wireless. The Device allows

wired and wireless clients to safely access the Internet. The USB port

allows you to connect a USB memory stick or USB hard drive for storing

or sharing files through the network.

Requirements

Make sure you have the following things before you start.

• Internet access - account information provided by your ISP, such as

user name, password, and so on.

• Internet Explorer 6.0 and later versions, with JavaScript enabled, or

Mozilla Firefox 3 and later versions or Safari 2.0 and later versions.

Hardware Setup

To connect your Device:

1. Use a telephone cable to connect your Device’s DSL port to a

telephone jack (or the DSL or modem jack on a splitter if you have

one).

2. ETHERNET: Use an Ethernet cable to connect a computer to a LAN

port for initial configuration and/or Internet access.

3. USB: You can connect a USB memory stick or a USB hard drive for

file sharing. The Device automatically detects the USB device.

Alternatively, use a USB cable (not provided) to connect a USB

printer to this port.

4. POWER: Use the provided power adaptor to connect the POWER

socket to an appropriate power source. Make sure the power at the

outlet is on. After connecting the power adaptor, look at the lights on

the front panel.

•ThePOWER light blinks while your Device starts up and then stays

on once it is ready.

•TheDSL light is either amber or green (depending on your

configuration method, see Internet Connection Setup) when your

Device has a DSL connection.

•TheINTERNET light turns on when the gateway is able to access

the Internet and will blink when your Device is sending or receiving

data.

•TheWAN/LAN light is on if it is properly connected and blinks when

there is traffic.

• Each ETHERNET light is on if the corresponding LAN port is

properly connected and blinks when there is traffic.

•TheUSB light turns on when there is a USB printer or memory

device is connected to the Device and blinks when transmitting data.

•TheWi-Fi 2.4G light is green when the wireless LAN is ready and

blinks when there is traffic.

•TheWPS light is green when WPS is enabled and blinks amber

while WPS is in process.

If the lights do not come on, check your connections and inspect your cables

for damage. If the lights are still off, contact technical support.

Internet Connection Setup

Your Device can automatically detect and configure your Internet

connection once the hardware is connected properly.

Automatic Connection

1. Open your web browser to a website. Wait while your Device tries to

detect your DSL connection to your ISP. This may take a few

minutes.

2. After it detects the connection, the DSL light shows amber on your

Device and the INTERNET light comes on when the Internet is ready

for you to use. If you have a PPPoE connection, you will have to

enter the user name and password provided by your ISP.

3. Go to Set Up a Wireless Network if you wish to configure your

wireless settings.

4. If the automatic connection is not successful, check your connections

and restart the Device. Also, make sure you have entered the user

name and password correctly. If you still cannot access the Internet,

follow the steps in the next section to manually configure the Internet

connection.

Manual Connection

You can also manually log into the Device’s Web Configurator and

configure the Internet connection.

1. In your browser, if the Device does not automatically re-direct you to

the login screen, go to http://192.168.0.1.

2. Enter the default user name admin and password (see the Device’s

label). Click Apply.

If the login screen does not open, make sure you allow web browser pop-up

windows, JavaScripts and Java permissions. Your computer should be also

set to get an IP address automatically from a DHCP server.

3. The main screen appears. Click Quick Setup to configure the

Device’s Internet access.

4. Enter the user name and password provided by your ISP. Click Apply

to finish the configuration.

5. The DSL light is green on your Device and the INTERNET light

comes on when the Internet is ready for you to use. If you still cannot

access the Internet, contact your ISP.

Set Up a Wireless Network

You can set up a wireless network using the following methods:

Using Wireless Protected Setup (WPS)

Press the WPS button on the Device’s front panel for more than 5

seconds to turn the WPS function on.

Follow these steps to add a WPS-enabled device to the wireless

network using the WPS button.

Set Up a Wireless Network Manually

The wireless LAN on your Device is enabled by default. To add a

wireless client to the network, use the settings found on the bottom panel

of your Device.

Configure wireless devices that you want to connect to the wireless

network to use the same wireless settings as the Device.

The default wireless settings vary for each Device. Refer to the label of

your Device and use the provided information.

Place the devices you

want to connect near one

another.

Press the WPS button on

the Device.

Press the WPS button on

a compatible device

within 2 minutes of

pressing the button on

the Device.

The WPS light on the

Device blinks amber

when connection is in

progress and is solid

green when connected.

1010

Wall Mounting

The following are dimensions of a screw anchor and M3 tap screw used

for wall mounting. All measurements are in millimeters (mm).

1. Locate a high position on a wall that is free of obstructions. Use a

sturdy wall.

2. For a concrete or brick wall find a drill bit with the same diameter as

the screw anchors. If you do not need the screw anchors, find a drill

bit slightly smaller in diameter than the included screws.

Inhaltsverzeichnis

Andere ZyXEL Communications WLAN-Router Handbücher

ZyXEL Communications

ZyXEL Communications NBG-420N Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG6617 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-660HN series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PRESTIGE 153 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG-415 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 100IH Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-2608HWL-Dx Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications LTE4506-M606 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications nbg334s Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG-415N - V1.00 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 660H Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG4115 - V1.0 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG-417N Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG4115 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications WAH7601 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications WAH7706 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG-416N Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications FSG1100HN Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications VMG1312 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG-417N Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG4115 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-330W Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications MWR222 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ARMOR G5 Bedienungsanleitung

Beliebte WLAN-Router Handbücher anderer Marken

Airlogic

Airlogic AirSync Class 1 Betriebsanleitung

Samsung

Samsung WCH730B Bedienungsanleitung

NETGEAR

NETGEAR PowerLINE WiFi 1000 Series Bedienungsanleitung

Askey

Askey RAC2V1K Bedienungsanleitung

Alloy

Alloy WLF2454AP-S Bedienungsanleitung

TELEFONICA

TELEFONICA USB Adapter Bedienungsanleitung

TP-Link

TP-Link TL-WR542G Bedienungsanleitung

Hama

Hama 53120 Bedienungsanleitung

Intellinet

Intellinet 524582 Bedienungsanleitung

Asus

Asus RT-N10P Bedienungsanleitung

D-Link

D-Link DIR-506L Bedienungsanleitung

Sapido

Sapido GR297n Bedienungsanleitung

Asus

Asus DSL-N55U Bedienungsanleitung

AMTC

AMTC WR7502 Bedienungsanleitung

Compaq

Compaq CP-2W - iPAQ Connection Point Bedienungsanleitung

SMC Networks

SMC Networks WBR14-N2 FICHE Bedienungsanleitung

Draytek

Draytek Vigor2120 Series Bedienungsanleitung

Sitecom

Sitecom WLR-4000 Bedienungsanleitung