ZyXEL Communications P-2601HN-F1 Series Bedienungsanleitung

www.zyxel.com

ADSL2+ IAD with 802.11n

Wireless

Firmware Version 3.10

Edition 1, 10/2010

P-2601HN(L)-F1 Series

DEFAULT LOGIN DETAILS

IP Address: http://192.168.1.1

Username admin

Password 1234

ZyXEL Communications Corporation

Device Panels

WIRELESS

BUTTON

POWER

LED

DSL

LED

INTERNET

LED PHONE

ON/OFF

RESET

POWER

ETHERNET

PORTS

LED

WIRELESS

ETHERNET

LED

PHONE

PORT

DSL

PORT

LED

FXO

PORT

(P-2601HNL-F1 ONLY)

Requirements

Make sure you have the following things before you start.

• INTERNET ACCESS: You need an Internet account with an ISP

(Internet Service Provider) and information such as user name,

password, and so on.

• VOIP ACCOUNT: You need the account information provided by

your VoIP service provider (the company that lets you make phone

calls over the Internet).

•

WEB BROWSER

: Internet Explorer 6.0 and later versions, with

JavaScript enabled, or Mozilla Firefox 3 and later versions or Safari

2.0 and later versions. The browser will be used to access the Internet

and/or access the P-2601HN(L)-F1 Series’ Web Configurator.

Hardware Connections

1. DSL: Use a telephone wire to connect this port to the telephone wall

jack. If you are using a splitter, use a telephone wire to connect this

port to the DSL/MODEM jack on the splitter. Use another telephone

wire to connect the PHONE jack in the splitter to the telephone wall

jack.

2. FXO (P-2601HNL-F1 only): You need a splitter to use the FXO port.

Use the PSTN line cable to connect the TEL (or PHONE) jack on a

splitter to this port.

3. ETHERNET: If you want a wired connection to the P-2601HN(L)-F1

Series, use an Ethernet cable to connect a computer to one of these

ports for initial configuration and/or Internet access.

4. PHONE: Use a telephone cable (and any telephone adaptor provided

with your P-2601HN(L)-F1 Series) to connect a telephone to the

PHONE port.

5. POWER: Use the power adaptor provided to connect an appropriate

power source to this socket.

6. Push the power button to the ON position.

Look at the LEDs (lights) on the top panel of the P-2601HN(L)-F1 Series.

• The WIRELESS light stays green when thewireless LAN is ready. It

blinks when the P-2601HN(L)-F1 Series is sending/receiving data

through the wireless LAN.

• The POWER light blinks during start-up and is green once the P-

2601HN(L)-F1 Series is ready.

• The ETHERNET light turns on if the corresponding ETHERNET

port is properly connected. If you do not connect a computer

correctly to this port, the ETHERNET light will not turn on.

The ETHERNET and/or WIRELESS lights blink when the P-2601HN(L)-

F1 Series is sending or receiving data. If the POWER light does not turn

on during start up, try turning the P-2601HN(L)-F1 Series off, check the

connections, wait a few seconds and then turn it back on. If the problem

persists, you may have a hardware problem and you need to contact

your vendor.

• The PHONE light stays on whenyour SIP account is registered and

blinks if the receiver is off the hook. See The Web Configurator on

page 9to see how to make calls through the Internet.

Internet Access Setup

The DSL and INTERNET lights are on if you have internet access. Open

your web browser and browse to http://www.zyxel.com. You may be

prompted to enter your username and password.

If one or both of these lights are not on, try turning the P-2601HN(L)-F1

Series off, check the connections, wait a few seconds and then turn it

back on. If the DSL light is not on, contact your service provider. If the

DSL light is on but the INTERNET light is not, you need to enter your

Internet access configuration using the Web Configurator - see page 9.

Setting Up a Wireless Connection

If you want to set up a wireless connection using the P-2601HN(L)-F1

Series, use one of the following methods:

1. Use the wireless SSID (network name) and WPA-PSK encryption

key if the device does not have the WPS logo - see page 7.

2. Use the WIRELESS button if your wireless device has a Wi-Fi

Protected Setup (WPS) logo - see page 8.

Setting Up a Wireless Connection using the

Information on the Label

The wireless function on your P-2601HN(L)-F1 Series is enabled by

default. Press the WIRELESS button on the P-2601HN(L)-F1 Series’ top

panel for 1 second to turn this function on or off.

To add a wireless client to the network, use the settings found in the rear

panel of the P-2601HN(L)-F1 Series, such as the following:

Right-click the wireless adapter icon which appears in the bottom right

of your computer monitor. Click

View Available Wireless Networks

Select the P-2601HN(L)-F1 Series’s

SSID

name and click

Connect

(

). The SSID “SecureWirelessNetwork” is given here as an example.

SSID:

SecureWirelessNetwork

WPA2-PSK: 7WC3R7TVKWK3R

3. You are prompted to enter a password. Enter the WPA-PSK

encryption key found in the rear panel of the P-2601HN(L)-F1 Series

and click Connect.

4. You may have to wait several minutes while your computer connects

to the wireless network.

5. You should now be securely connected wirelessly to the P-

2601HN(L)-F1 Series.

If you cannot connect wirelessly to the P-2601HN(L)-F1

Series, check that you have selected the correct SSID and

entered the correct security key. If that does not work, ensure

that the WIRELESS button on the front panel is turned on.

Setting Up a Wireless Connection using WPS

Press the WIRELESS button on the P-2601HN(L)-F1 Series’ top panel

for more than 5 seconds to turn the WPS function on.

Follow these steps to add a WPS-enabled device to the wireless network

using the WIRELESS button.

The Web Configurator

The Web Configurator is a web browser tool that allows you to configure

the P-2601HN(L)-F1 Series. The computer and the P-2601HN(L)-F1

Series need to be in the same IP address range to use this tool.

Place the devices you want to connect

near one another.

Press the WIRELESS button on the P-

2601HN(L)-F1 Series.

The WIRELESS LED blinks orange.

Press the WPS button on a compatible

device (such as the NWD-270N) within

2 minutes of pressing the button on the

P-2601HN(L)-F1 Series.

The WIRELESS LED on the P-

2601HN(L)-F1 Series shines steadily

when connected.

1. Open your browser and enter http://192.168.1.1 (the P-2601HN(L)-

F1 Series’ default IP address) as the address.

If you cannot access the Web configurator, make sure the IP address

and subnet mask of the ZyXEL Device and the computer are in the same

IP address range. See your User's Guide for information on setting up

your computer's IP address.

2. For administrator login, enter username admin and password 1234

(default). Click Login.

If the login screen does not open, make sure you allow web

browser pop-up windows, JavaScript and Java permissions.

Your computer should also be set to get an IP address

automatically from a DHCP server. See your User’s Guide

for more information.

3. If the INTERNET light is off, manually configure the Internet

connection. Click Network Setting, then click on Broadband, and

then click on Add new WAN Interface (Network Setting >

Broadband > Add new WAN Interface).

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ZyXEL Communications WLAN-Router Handbücher

ZyXEL Communications

ZyXEL Communications P-334U Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG-460N Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Multy U WSR30 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications LTE4506 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-320W Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications AMG1302-11C Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications MWR211 - V1.0 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG-416N Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications MWR222 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-2612HNU(L)-FxF Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG318S Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Multy X WSQ50 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG-334SH Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG-417N Handbuch

ZyXEL Communications

ZyXEL Communications ZyAIR G-2000 Plus Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG-418N Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications nbg334s Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG-318S - V3.60 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG6503 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications FSG1100HN Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications nbg334s Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG-417N Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NR2101 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-334WT Bedienungsanleitung

Beliebte WLAN-Router Handbücher anderer Marken

Airlogic

Airlogic AirSync Class 1 Betriebsanleitung

Samsung

Samsung WCH730B Bedienungsanleitung

NETGEAR

NETGEAR PowerLINE WiFi 1000 Series Bedienungsanleitung

Askey

Askey RAC2V1K Bedienungsanleitung

Alloy

Alloy WLF2454AP-S Bedienungsanleitung

TELEFONICA

TELEFONICA USB Adapter Bedienungsanleitung

TP-Link

TP-Link TL-WR542G Bedienungsanleitung

Hama

Hama 53120 Bedienungsanleitung

Intellinet

Intellinet 524582 Bedienungsanleitung

Asus

Asus RT-N10P Bedienungsanleitung

D-Link

D-Link DIR-506L Bedienungsanleitung

Sapido

Sapido GR297n Bedienungsanleitung

Asus

Asus DSL-N55U Bedienungsanleitung

AMTC

AMTC WR7502 Bedienungsanleitung

Compaq

Compaq CP-2W - iPAQ Connection Point Bedienungsanleitung

SMC Networks

SMC Networks WBR14-N2 FICHE Bedienungsanleitung

Draytek

Draytek Vigor2120 Series Bedienungsanleitung

Sitecom

Sitecom WLR-4000 Bedienungsanleitung