ZyXEL Communications P-2612HNU(L)-FxF Bedienungsanleitung

www.zyxel.com

802.11n ADSL2+ VoIP IAD

Firmware V3.10

Edition 1, 9/2010

P-2612HNU(L)-FxF

DEFAULT LOGIN DETAILS

IP Address: http://192.168.1.1

User Login: User Name: user

Password: 1234

Administrator

Password: 1234

ZyXEL Communications Corporation

Device Panels

WLAN

BUTTON

POWER

LED DSL

LED

INTERNET

LED

PHONE 1, 2

ON/OFF RESET

POWER

ETHERNET

PORTS

LEDS

WAN

LED

WLAN

LED

ETHERNET

LED

PHONE

PORTS

LINE WAN

PORT

DSL

PORT

USB

LED

USB

PORT

USB

PORT

Overview

The P-2612HNU(L)-FxF is an ADSL Integrated Access Device (IAD)

which combines high-speed ADSL Internet access, a built-in switch, a

firewall and high-speed wireless networking capability. It also comes with

two USB 2.0 ports: they can be used for sharing files via a USB

compatible storage device and 3G connection by inserting a 3G wireless

adapter. There are also two phone ports for making calls over the

Internet (Voice over IP or VoIP). The P-2612HNU(L)-FxF can also

function as a print server.

Requirements

Make sure you have the following things before you start.

• Internet access - account information provided by your ISP, such as

user name, password, and so on.

• VoIP account - You need the account information provided by your

VoIP service provider (the company that lets you make phone calls

over the Internet).

• 3G account - if you want to access the Internet through a 3G

network. The P-2612HNU(L)-FxF uses this 3G connection as your

WAN or a backup when the DSL/Ethernet WAN connection fails.

• Internet Explorer 6.0 and later versions, with JavaScript enabled, or

Mozilla Firefox 3 and later versions or Safari 2.0 and later versions.

Hardware Connections

1. Do one of the following for your Internet connection:

a. DSL: Use a telephone wire to connect this port to a telephone jack

(or the DSL or MODEM jack on a splitter, if you have one).

b. WAN: If you have a DSL router or modem already in your network

or you want to use a cable modem, use an Ethernet cable to

connect this port to an Ethernet jack with Internet access.

Using a 4-wire Ethernet cable limits your connection to 100 Mbps. Note

that the connection speed also depends on what the Ethernet device at

the other end can support.

2. LINE (for “L” models only): Use the PSTN line cable to connect the

TEL (or PHONE) jack on a splitter to this port. If a splitter is not

provided, connect the telephone jack to this port.

When the ZyXEL Device does not have power, only the phone

connected to PHONE port 1 can be used for making calls. Ensure you

know which phone this is, so that in case of emergency you can make

outgoing calls.

3. USB 2.0: There are two USB ports on your P-2612HNU(L)-FxF, one

is at the back panel and one is one the side panel. You can do the

following:

a. Connect a USB (version 2.0 or lower) memory stick or a USB hard

drive for file sharing. The P-2612HNU(L)-FxF automatically

detects the USB device. Alternatively, use a USB cable (not

provided) to connect a USB (version 2.0 or lower) printer to this

port.

b. Insert a 3G adapter to access the Internet wirelessly via a 3G

network. The P-2612HNU(L)-FxF uses this 3G WAN connection

as a backup when the DSL/Ethernet WAN connection fails.

4. ETHERNET: Use an Ethernet cable to connect a computer to one of

these ports for initial configuration and/or Internet access.

5. PHONE: Use a telephone cable (and any telephone adaptor provided

with your P-2612HNU(L)-FxF) to connect a telephone to the PHONE

1 or PHONE 2 port. If you only have one telephone, you should use

port 1.

6. Use the power adaptor provided with your P-2612HNU(L)-FxF to

connect an appropriate power source to this socket.

7. Push the power button to the on position.

Look at the LEDs (lights) on the top panel of the P-2612HNU(L)-FxF.

• The POWER light blinks during start-up and is green once the P-

2612HNU(L)-FxF is ready.

• An ETHERNET light turns on if the corresponding ETHERNET port

is properly connected. An Ethernet port’s light blinks when the P-

2612HNU(L)-FxF is sending or receiving data through it.

• The WLAN/WPS light stays green when the wireless LAN is ready.

It blinks when the P-2612HNU(L)-FxF is sending/receiving data

through the wireless LAN.

• The DSL light stays on if a physical DSL connection exists and

blinks when attempting to synchronize DSL signal.

The WAN light stays on if this port is properly connected and blinks

when sending or receiving data through Ethernet WAN interface.

The INTERNET light is green when Internet access is available and

blinks when sending or receiving data.

• The PHONE lights stay on when your SIP account is registered and

they blink if the receiver is off the hook or there is an incoming call.

• The USB light turns on when there is a USB device (printer or

memory stick) or a 3G adapter connected to the P-2612HNU(L)-

FxF and blinks when transmitting data.

If no lights are on, check your connections. Make sure that

you have the power adaptor connected to the P-

2612HNU(L)-FxF and plugged in to an appropriate power

source. Make sure the power source is turned on. Turn the

P-2612HNU(L)-FxF off, wait for a few seconds and turn it

back on. If the LEDs are still off, contact your local vendor.

If the INTERNET light is green but the PHONE light is off,

see the Tutorials and VoIP chapters in your User’s Guide for

how to use the VoIP screens to set up your VoIP account.

If the PHONE light is on, see Make Phone Calls on page 13

to see how to make calls through the Internet.

If the WAN light is on but the INTERNET light is off, see the

Tutorials and Broadband chapters in your User’s Guide for

how to use the Network Setting > Broadband screen to set

up the WAN connection.

If you want to have the P-2612HNU(L)-FxF use 3G as your

WAN or as a backup when the Ethernet WAN connection

fails, see your User’s Guide for how to use the Network

Setting > Broadband > 3G Backup screen to set up the 3G

WAN connection.

Set Up a Wireless Network

To set up a wireless network you need at least one wireless network

card/adapter.

• If you have a desktop computer, use either a wireless USB adapter

or a wireless PCI adapter.

• If you have a laptop, use either a wireless USB adapter or a

wireless CardBus card. These are built into many laptops.

Setting Up a Secure Wireless Network with

WPS

If your wireless devices display the WPS logo, you

can use Wi-Fi Protected Setup (WPS) to add

wireless devices to your wireless network. If your

wireless devices do not display the WPS logo, go to

Set Up a Wireless Network Manually on page 11 to have your wireless

devices join the P-2612HNU(L)-FxF’s wireless network using the

Windows wireless configuration tool.

The P-2612HNU(L)-FxF supports two WPS methods for creating a

secure connection.

• Push Button Configuration - create a secure wireless network

simply by pressing the P-2612HNU(L)-FxF’s physical WPS button.

See Push Button Configuration on page 8.

• PIN Configuration - create a secure wireless network by entering

your wireless device’s PIN (Personal Identification Number) into the

configuration screen of the P-2612HNU(L)-FxF. See PIN

Configuration on page 9.

You must use the same method on the P-2612HNU(L)-FxF and the

wireless client.

Push Button Configuration

1. Place a WPS-enabled device that is installed in your system and

supports the WPS Push Button method within range of the P-

2612HNU(L)-FxF.

2. Press the WLAN button on the P-2612HNU(L)-FxF’s toppanel for five

seconds.

3. Use the WPS-enabled device’s WPS button. It can be either a button

in the utility or a physical button. See the device’s documentation if

you cannot locate the WPS button. It doesn’t matter which button is

pressed first. You must press the second button within two minutes of

pressing the first one.

4. The P-2612HNU(L)-FxF and the wireless device establish a secure

connection. This can take up to two minutes.

5. Congratulations! Your computer is now ready to connect to the

Internet wirelessly through your P-2612HNU(L)-FxF.

PIN Configuration

1. Place a WPS-enabled device that is installed in your computer and

supports the WPS PIN configuration method within range of the P-

2612HNU(L)-FxF.

2. Log into the P-2612HNU(L)-FxF’s web configurator at http://

192.168.1.1 (see The Web Configurator on page 13 for more details

on this).

3. In the navigation panel, click Network Setting > Wireless > WPS.

4. Select the Enable check box and click Apply to enable the WPS

function.

5. Enter the PIN of the other WPS-enabled device into the Enter PIN

here text box and click Register. You can locate this PIN number in

the other device’s utility or on the device itself. See the other device’s

documentation if you cannot locate the PIN.

6. Click Start or Apply in the other device’s utility screen within two

minutes of clicking Register in the P-2612HNU(L)-FxF web

configurator screen.

7. The P-2612HNU(L)-FxF and the other WPS-enabled device establish

a secure connection. This can take up to two minutes.

8. Congratulations! Your computer is now ready to connect to the

Internet wirelessly through your P-2612HNU(L)-FxF.

Inhaltsverzeichnis

Andere ZyXEL Communications WLAN-Router Handbücher

ZyXEL Communications

ZyXEL Communications NBG6515 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-2601HN-F1 Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications VMG892-B10A Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications WSR30 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-2608HWL-Dx Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG-334SH Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-2612HW Series Bedienerhandbuch

ZyXEL Communications

ZyXEL Communications NBG-334SH Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications LTE3301-M209 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyAIR G-2000 Plus Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications LTE7461-M602 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG318S Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-334WT Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG6503 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG6815 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications LTE5366 Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications VMG8324 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications X650 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG318S Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-334WHD Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG-416N Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-330W Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG-415N Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications HC-WXF990 Bedienungsanleitung

Beliebte WLAN-Router Handbücher anderer Marken

Airlogic

Airlogic AirSync Class 1 Betriebsanleitung

Samsung

Samsung WCH730B Bedienungsanleitung

NETGEAR

NETGEAR PowerLINE WiFi 1000 Series Bedienungsanleitung

Askey

Askey RAC2V1K Bedienungsanleitung

Alloy

Alloy WLF2454AP-S Bedienungsanleitung

TELEFONICA

TELEFONICA USB Adapter Bedienungsanleitung

TP-Link

TP-Link TL-WR542G Bedienungsanleitung

Hama

Hama 53120 Bedienungsanleitung

Intellinet

Intellinet 524582 Bedienungsanleitung

Asus

Asus RT-N10P Bedienungsanleitung

D-Link

D-Link DIR-506L Bedienungsanleitung

Sapido

Sapido GR297n Bedienungsanleitung

Asus

Asus DSL-N55U Bedienungsanleitung

AMTC

AMTC WR7502 Bedienungsanleitung

Compaq

Compaq CP-2W - iPAQ Connection Point Bedienungsanleitung

SMC Networks

SMC Networks WBR14-N2 FICHE Bedienungsanleitung

Draytek

Draytek Vigor2120 Series Bedienungsanleitung

Sitecom

Sitecom WLR-4000 Bedienungsanleitung