ZyXEL Communications P-2612HW Series Bedienerhandbuch

www.zyxel.com

802.11g Wireless ADSL VoIP IAD

Firmware v3.70

Edition 2, 5/2009

P-2612HW Series

DEFAULT LOGIN DETAILS

IP Address: http://192.168.1.1

User Login: User Name: user

Password: user

Administrator

Password: 1234

ZyXEL Communications Corporation

Device Panels

WLAN

BUTTON POWER

LED ADSL

LED WAN

LED PHONE 1, 2

ON/OFF

RESET

POWER

ETHERNET

PORTS

LEDS

INTERNET

LED

WLAN

LED

ETHERNET

LED

PHONE

PORTS

DSL/WAN

WAN

PORT

DSL

PORT

P-2612HW-F3

RJ-11

RJ-45

P-2612HW-F1

ENGLISH

Overview

The P-2612HW Series is a router which combines high-speed ADSL

Internet access, a built-in switch, a firewall and high-speed wireless

networking capability. It also has a phone port for making calls over the

Internet (Voice over IP or VoIP).

Requirements

Make sure you have the following things before you start.

• Internet access - account information provided by your ISP, such as

user name, password, and so on.

• Internet Explorer 6.0 or later or Netscape Navigator 7.0 or later, with

JavaScript enabled.

See the User’s Guide on the CD for all configuration details.

Hardware Connections

Remove the P-2612HW Series’s plastic cover before using it.

1. Do one of the following for your Internet connection:

a. DSL: Use a telephone wire to connect this port to a telephone jack

(or the DSL or MODEM jack on a splitter, if you have one).

P-2612HW-F3

RJ-11

RJ-45

P-2612HW-F1

ENGLISH

b. WAN: If you have a DSL router or modem already in your network

or you want to use a cable modem, push the DSL/WAN switch to

the WAN side and use an Ethernet cable to connect this port to an

Ethernet jack with Internet access.

2. ETHERNET: Use an Ethernet cable to connect a computer to one of

these ports for initial configuration and/or Internet access.

3. PHONE: Use a telephone cable (and any telephone adaptor provided

with your P-2612HW Series) to connect a telephone to the PHONE 1

or PHONE 2 port.

4. Use the power adaptor provided with your P-2612HW Series to

connect an appropriate power source to this socket.

5. Push the power button to the on position.

Look at the LEDs (lights) on the top panel of the P-2612HW Series.

• The POWER light blinks during start-up and is green once the P-

2612HW Series is ready.

• An ETHERNET light turns on if the corresponding ETHERNET port

is properly connected. An Ethernet port’s light blinks when the P-

2612HW Series is sending or receiving data through it.

• The ADSL light stays on if a physical DSL connection exists and

blinks when transmitting data.

The WAN light stays on if this port is properly connected and blinks

when transmitting data.

The INTERNET light is green when Internet access is available.

• The PHONE lights stay on when your SIP account is registered and

they blink if the receiver is off the hook.

• The WLAN light stays green when the wireless LAN is ready. It

blinks when the P-2612HW Series is sending/receiving data

through the wireless LAN.

If the PHONE light is on, skip to Using Your Phones on page 15 to see

how to make calls through the Internet.

 If no lights are on, check your connections. Then turn the P-

2612HW Series off, wait for a few seconds and turn it back

on. If the LEDs are still off, contact your local vendor.

ENGLISH

Wizard Configuration

• If the INTERNET light is green, skip to Set Up a Wireless Network

on page 10.

• If the DSL/WAN switch is set to DSL and the DSL light is on but the

INTERNET light is off; use this section to configure your Internet

access settings. If the

• If the DSL/WAN switch set to WAN and the WAN light is on but the

INTERNET light is off; see your User’s Guide for how to use the

Network > WAN screen to set up the Ethernet WAN connection.

1. Open your browser and enter http://192.168.1.1 (the P-2612HW

Series's default IP address) as the address.

2. For administrator login, enter username admin and password 1234

(default). Only administrators can configure the SIP account settings.

For user login, enter user as both the username and password. Click

This document uses the screenshots of P-2612HW-F1 for examples.

 If the login screen does not open, make sure you allow web

browser pop-up windows, JavaScripts and Java

permissions. Your computer should be also set to get an IP

address automatically from a DHCP server. See the

appendices in your User’s Guide for more information.

3. In the Status screen, click the Wizard icon ( ) in the upper right

corner.

Internet/Wireless Setup

Enter the Internet access information exactly as given to you by your ISP

in each wizard screen and then click Next to continue or click Back to

return to the previous screen. Current screen information is lost if you

click Back.

1. Click INTERNET/WIRELESS SETUP.

ENGLISH

2. Wait while the P-2612HW Series tries to detect your Internet

connection. If the P-2612HW Series cannot detect it, follow the

directions in the screen. Enter the information provided by your ISP.

Keep the default settings if your ISP did not provide some

information.

3. See the back panel for the P-2612HW Series’s unique wireless SSID

(network name) and WPA-PSK encryption key. Unless you want to

use other wireless settings, you can close the wizard after you

configure the Internet connection.

To configure your wireless clients to connect to the P-2612HW Series,

see Set Up a Wireless Network on page 10.

4. When your Internet connection is setup correctly, the DSL and

INTERNET lights should be green. When you are finished click

Return to Wizard Main Page.

 If you cannot access the Internet and the INTERNET light is

red, make sure you enter the correct information in the

INTERNET/WIRELESS SETUP wizard screens. If you are

using a new Internet account, contact your ISP to make sure

it is active. If you are trying to access the Internet wirelessly,

make sure the wireless and security settings in your wireless

client are the same as the settings in the P-2612HW Series.

Set Up a Wireless Network

To set up a wireless network you need at least one wireless network

card/adapter.

• If you have a desktop computer, use either a wireless USB adapter

or a wireless PCI adapter.

• If you have a laptop, use either a wireless USB adapter or a

wireless CardBus card. These are built into many laptops.

Setting Up a Wireless Network with WPS

If your wireless devices display the WPS logo, you

can use Wi-Fi Protected Setup (WPS) to add

wireless devices to your wireless network. If your

wireless devices do not display the WPS logo, go to

Set Up a Wireless Network Manually on page 12 to manually set up a

wireless network.

The P-2612HW Series supports two WPS methods for creating a secure

connection.

• Push Button Configuration - create a secure wireless network

simply by pressing the P-2612HW Series’s physical WPS button.

See Push Button Configuration on page 11.

• PIN Configuration - create a secure wireless network by entering

the P-2612HW Series’s PIN (Personal Identification Number) into

the configuration screen of another wireless device. See PIN

Configuration on page 11.

You must use the same method on the P-2612HW Series and the

wireless client.

Andere Handbücher für P-2612HW Series

Inhaltsverzeichnis

Andere ZyXEL Communications WLAN-Router Handbücher

ZyXEL Communications

ZyXEL Communications NBG334W Handbuch

ZyXEL Communications

ZyXEL Communications PRESTIGE 153X Betriebsanleitung

ZyXEL Communications

ZyXEL Communications P-336M Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-2612HNU-Fx Series Handbuch

ZyXEL Communications

ZyXEL Communications WAH7608 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications X650 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG-415N Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications 760559122614 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-336M Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-330W Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications FSG1100HN Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG6617 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG-415N - V1.00 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG-417N Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG2105 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG334W Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NWD-310N Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG318S Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications LTE4506-M606 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications LTE5388-M804 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-334U Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-2612HW Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-660HN series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG 5715 Bedienungsanleitung

Beliebte WLAN-Router Handbücher anderer Marken

Airlogic

Airlogic AirSync Class 1 Betriebsanleitung

Samsung

Samsung WCH730B Bedienungsanleitung

NETGEAR

NETGEAR PowerLINE WiFi 1000 Series Bedienungsanleitung

Askey

Askey RAC2V1K Bedienungsanleitung

Alloy

Alloy WLF2454AP-S Bedienungsanleitung

TELEFONICA

TELEFONICA USB Adapter Bedienungsanleitung

TP-Link

TP-Link TL-WR542G Bedienungsanleitung

Hama

Hama 53120 Bedienungsanleitung

Intellinet

Intellinet 524582 Bedienungsanleitung

Asus

Asus RT-N10P Bedienungsanleitung

D-Link

D-Link DIR-506L Bedienungsanleitung

Sapido

Sapido GR297n Bedienungsanleitung

Asus

Asus DSL-N55U Bedienungsanleitung

AMTC

AMTC WR7502 Bedienungsanleitung

Compaq

Compaq CP-2W - iPAQ Connection Point Bedienungsanleitung

SMC Networks

SMC Networks WBR14-N2 FICHE Bedienungsanleitung

Draytek

Draytek Vigor2120 Series Bedienungsanleitung

Sitecom

Sitecom WLR-4000 Bedienungsanleitung