3Com OfficeConnect 3CR414492 Bedienungsanleitung

http://www.3com.com/

OfficeConnect®

Remote 812 ADSL

Router Getting Started

Guide

Release 2.0

Part No. 10043336 AA

Published March 2001

3Com Corporation

5400 Bayfront Plaza Santa Clara, California 95052-8145

reproduced in any form or by any means or used to make any derivative work (such as translation,

transformation, or adaptation) without written permission from 3Com Corporation.

3Com Corporation reserves the right to revise this documentation and to make changes in content

from time to time without obligation on the part of 3Com Corporation to provide notification of such

revision or change.

3Com Corporation provides this documentation without warranty of any kind, either implied or

expressed, including, but not limited to, the implied warranties of merchantability and fitness for a

particular purpose. 3Com may make improvements or changes in the product(s) and/or the program(s)

described in this documentation at any time.

UNITED STATES GOVERNMENT LEGENDS:

If you are a United States government agency, then this documentation and the software described

herein are provided to you subject to the following:

United States Government Legend: All technical data and computer software is commercial in

nature and developed solely at private expense. Software is delivered as Commercial Computer

Software as defined in DFARS 252.227-7014 (June 1995) or as a commercial item as defined in

FAR 2.101(a) and as such is provided with only such rights as are provided in 3Com’s standard

commercial license for the Software. Technical data is provided with limited rights only as provided in

DFAR 252.227-7015 (Nov 1995) or FAR 52.227-14 (June 1987), whichever is applicable. You agree not

to remove or deface any portion of any legend provided on any licensed program or documentation

contained in, or delivered to you in conjunction with this Getting Started Guide.

Unless otherwise indicated, 3Com registered trademarks are registered in the United States and may or

may not be registered in other countries.

3Com, the 3Com logo, and OfficeConnect Remote 812 are registered trademarks of

3Com Corporation. 3ComFacts is a service mark of 3Com Corporation.

Acrobat and Acrobat Reader are trademarks of Adobe. Intel and Pentium are registered trademarks of

Intel Corporation. Internet Explorer, Microsoft, MS-DOS, Windows, Windows 95, and Windows NT are

registered trademarks of Microsoft Corporation. Novell and NetWare are registered trademarks of

Novell, Inc. Other brand and product names may be registered trademarks or trademarks of their

respective holders.

iii

TABLE OF CONTENTS

ABOUT THIS GUIDE

Introduction 1

Conventions 2

1GETTING STARTED

Introduction 1-1

What’s in the Package? 1-1

What Can the OCR 812 Do? 1-2

What Are the Features of This Product? 1-2

SuperNAT 1-5

Virtual Private Networks 1-5

Tunneling Protocols 1-5

Encryption Protocols 1-6

SIP Phone Support 1-6

OCR 812 Boot Mode Options 1-6

Setting DHCP Smart Mode 1-7

Setting Bridge Mode 1-7

Setting Unconfigured Mode 1-8

DIP Switch Settings 1-8

2INSTALLING THE OFFICECONNECT REMOTE 812 ADSL ROUTER

Introduction 2-1

Installing the OCR 812 Hardware 2-1

Back Panel Features 2-1

Configuring the OfficeConnect Remote 812 Hardware 2-3

LED Light Operation 2-4

Configuring the Workstation and Selecting a Mode 2-5

Using DHCP Smart Mode 2-5

Using the Default Bridge Mode 2-5

Using the Unconfigured Mode 2-6

Installing the OfficeConnect Remote 812 Software 2-6

Prerequisites 2-7

To Install the OfficeConnect Remote 812 Software 2-7

Installing Microsoft Internet Explorer 2-7

Installing Adobe Acrobat 2-8

Installing Instant Update 2-9

To Install Instant Update 2-9

Configuring the OfficeConnect Remote 812 Manager 2-9

Configuring in Bridge Only Mode 2-9

Changing the Login Name and Password 2-9

Configuring in DHCP Smart Mode 2-10

Configuring in Unconfigured Mode 2-10

Using the Remote 812 IP Configuration Wizard 2-10

Using the Command Line Interface 2-10

Starting the OfficeConnect Remote 812 Manager 2-11

Configuration Using the Remote 812 IP Configuration Wizard 2-12

Setting Up a Remote Site Profile 2-12

Remote 812 IP Configuration Wizard Field Descriptions 2-12

Remote Site Name 2-12

Network Service 2-13

ATM VC Parameters 2-13

Port Address Translation 2-14

WAN IP Information 2-14

Resetting the Configuration of Your Router 2-15

3TESTING THE CONFIGURATION

Introduction 3-1

General Testing 3-1

Step 1: Check Interface Status 3-1

Step 2: Check Network Status 3-2

IP Testing 3-3

Option 1: OfficeConnect Remote 812 Manager Ping to ISP or Remote Site

Network 3-3

DNS Errors 3-4

Option 2: DOS Ping to ISP or Remote Site Network 3-4

Option 3: Internet Browser (Internet Access Only) 3-5

Advanced Troubleshooting 3-5

ACONFIGURING YOUR WORKSTATION TO BEADHCP CLIENT

Workstation Configuration Using DHCP Smart Mode A-1

BSAFETY INFORMATION

Important Safety Information B-2

Wichtige Sicherheitsinformationen B-3

Important notice de securite B-4

Medidas de seguridad importantes B-6

Informazioni importanti per la sicurezza B-7

B-7

CSPECIFICATIONS

Introduction C-1

General Specifications C-1

Power requirements C-1

Temperature requirements C-1

Humidity requirements C-1

MTBF (Mean Time Between Failures) C-1

Jacks C-1

ADSL Interface (one RJ-11 jack) C-2

LAN Interface (four RJ-45 jacks) C-2

Console Interface (DB-9) (Default configured as DCE) C-2

INDEX

FCC DECLARATION OF CONFORMITY

3COM CORPORATION LIMITED WARRANTY

ABOUT THIS GUIDE

Introduction

The guide describes the features, installation, and initial

configuration of the OfficeConnect®Remote 812 ADSL

Router (OCR 812). The guide is intended for both first-time

and experienced computer network users who want to

install and use the OCR 812.

With your new OCR 812, we have provided an Installation

CD and an Installation Map.



If you are using Windows, put the Installation CD in

your CD-ROM drive and follow the steps given on the

screens using your foldout Map.



If your operating system is Macintosh or Unix-based,

you can begin by following the steps on the Map to set

up the hardware and then copying (or referencing) files

on the CD at Step 4. In Step 5, Configure the OCR 812,

you follow the instructions given for the type of Boot

Mode you have configured. There are small differences

in the procedure.

After you have initially configured the unit, you can

implement additional configuration to optimize the unit’s

performance on your network.

Refer to the OfficeConnect Remote 812 Online User’s

Guide (install from your OfficeConnect Remote 812

Installation CD) for advanced configuration options and the

Online HTML Help. Click the help buttons located on the

Tools page and the context-sensitive buttons on the

Configuration page for more information.

This Getting Started Guide is available in Adobe Acrobat

Reader Portable Document Format (PDF) or HTML on the

OCR 812 World Wide Web site located at:

http://www.3com.com/ocr812/

ii ABOUT THIS GUIDE

You can also learn about other 3Com products by going to

the following web site location:

http://www.3com.com/

Conventions

Table 0-1 and Table 0-2 list conventions that are used

throughout this guide.

Ta b l e 0 - 1 Notice Icons

Notice Type Description

NOTE Information that describes important features or

instructions

Caution Information that alerts you to potential loss of data

or potential damage to an application, system, or

device

Warning Information that alerts you to potential personal

injury

Ta b l e 0 - 2 Text Conventions

Convention Description

Screen displays This typeface represents information as it appears on the

screen.

The words “enter”

and “type”

When you see the word “enter”in this guide, you must

type something, and then press Return or Enter. Do not

press Return or Enter when an instruction simply says

“type.”

Keyboard key names If you must press two or more keys simultaneously, the

key names are linked with a plus sign (+). Example:

Press Ctrl+Alt+Del

Words in italics Italics are used to:



Emphasize a point.



Denote a new term at the place where it is defined in

the text.



Identify menu names, menu commands, and software

button names. Examples:

From the Help menu, select Contents.

Click OK.



Highlight the name of a referenced book or pdf file.

1GETTING STARTED

Introduction

This chapter provides instructions for pre-installation of the

OCR 812.



What’s in the Package?



What can the OCR 812 do?



What are the Features of this Product?



OCR 812 Boot Modes

What’s in the Package?

Before you install the OCR 812, check the contents of the

box against the packed contents checklist below. If any of

the items have been damaged in transit or are missing,

contact the 3Com dealer from whom the equipment was

purchased.

The OCR 812 Package contains the following:



OCR 812 unit



Power adapter and power cord



Ethernet cable (RJ-45 —RJ-45)



DSL cable (RJ-11 —RJ-11)



Console cable (DB-9 —DB-9)



OCR 812 Installation Map



CD-ROM containing the following:



OfficeConnect Remote 812 ADSL Router Getting

Started Guide (.pdf format only)



OfficeConnect Remote 812 ADSL Router Online

User’s Guide (viewable in your web browser)



OfficeConnect Remote 812 CLI User’s Guide (.pdf

format only)

1-2 CHAPTER 1: GETTING STARTED



Microsoft Internet Explorer version 5.5 in English,

Spanish, and Korean.



OfficeConnect Remote 812 Manager web-based

help files,the Instant Update Install program, and

the IP Wizard.

Note: The Instant Update Install program and the IP Wizard

are operational only for Windows users at this time.

What Can the OCR 812 Do?

The OCR 812 is a stand-alone BRouter with data interfaces

to a Local Area Network (LAN) and a Wide Area Network

(WAN).

A BRouter is a router with bridging capability that

understands how to route specific types of packets, such as

TCP/IP packets. The bridge function of the Brouter forwards

packets to other network(s) connected to the device.

The following is a representation of how your OCR 812

connects a LAN and WAN:

What Are the Features of This Product?

The following table displays the primary features of the

OCR 812:

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere 3Com Netzwerk-Router Handbücher

3Com

3Com OfficeConnect 3CRWDR200A-75 Bedienungsanleitung

3Com

3Com OfficeConnect 3CR858-91 Bedienungsanleitung

3Com

3Com 3C16980A SuperStack3300 Bedienungsanleitung

3Com

3Com 400 Family Bedienungsanleitung

3Com

3Com 3C8S400 - SuperStack II PathBuilder S400... Bedienungsanleitung

3Com

3Com 3CBLUG24A Bedienungsanleitung

3Com

3Com OfficeConnect 3C612 Bedienungsanleitung

3Com

3Com OfficeConnect 3CRWDR200A-75 Bedienungsanleitung

3Com

3Com 3CNJ205 Bedienungsanleitung

3Com

3Com NETBuilder SI Leitfaden

3Com

3Com Switch 4500 PWR 26-Port Bedienungsanleitung

3Com

3Com WL-603 Bedienungsanleitung

3Com

3Com OfficeConnect 3CRWE754G72-A Bedienungsanleitung

3Com

3Com 3C13640 Bedienungsanleitung

3Com

3Com 3CRWE754G72-A Bedienungsanleitung

3Com

3Com OfficeConnect WL-537 Bedienungsanleitung

3Com

3Com OfficeConnect Remote 812 Bedienungsanleitung

3Com

3Com 3C13636 Bedienungsanleitung

3Com

3Com Router 3016 Bedienungsanleitung

3Com

3Com 3C13751 Bedienungsanleitung

3Com

3Com MSR 20-40 Bedienungsanleitung

3Com

3Com Router 3012 Bedienungsanleitung

3Com

3Com OfficeConnect Remote 812 Bedienungsanleitung

3Com

3Com OfficeConnect 3CP4144 Montageanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise