3Com AP9152 Handbuch

3Com AP9152 802.11n 2.4/5GHz

Single-Band Access Point

Hardware Installation Guide

BOM: 3122A08W

3C Number: 3CRWE915275(FAT Mode)

3CRWE9152A75(FIT Mode)

Manual Version: 6PW102

www.3com.com

3Com Corporation

350 Campus Drive, Marlborough, MA, USA 01752

3064

English...1

Français...13

Italiano...25

Polski...37

Português Brazilian...50

Deutsch...62

Español Latino...74

Espanol...86

Regulatory Information...98

List of the Hazardous

Substances...106

documentation may be reproduced in any form or by any means or used to make any

derivative work (such as translation, transformation, or adaptation) without written

permission from 3Com Corporation.

3Com Corporation reserves the right to revise this documentation and to make

changes in content from time to time without obligation on the part of 3Com

Corporation to provide notification of such revision or change.

3Com Corporation provides this documentation without warranty, term, or condition

of any kind, either implied or expressed, including, but not limited to, the implied

warranties, terms or conditions of merchantability, satisfactory quality, and fitness for

a particular purpose. 3Com may make improvements or changes in the product(s)

and/or the program(s) described in this documentation at any time.

If there is any software on removable media described in this documentation, it is

furnished under a license agreement included with the product as a separate

document, in the hard copy documentation, or on the removable media in a directory

file named LICENSE.TXT or !LICENSE.TXT. If you are unable to locate a copy,

please contact 3Com and a copy will be provided to you.

UNITED STATES GOVERNMENT LEGEND

If you are a United States government agency, then this documentation and the

software described herein are provided to you subject to the following:

All technical data and computer software are commercial in nature and developed

solely at private expense. Software is delivered as “Commercial Computer Software”

as defined in DFARS 252.227-7014 (June 1995) or as a “commercial item” as defined

in FAR 2.101(a) and as such is provided with only such rights as are provided in

3Com’s standard commercial license for the Software. Technical data is provided

with limited rights only as provided in DFAR 252.227-7015 (Nov 1995) or FAR

52.227-14 (June 1987), whichever is applicable. You agree not to remove or deface

any portion of any legend provided on any licensed program or documentation

contained in, or delivered to you in conjunction with, this User Guide.

Unless otherwise indicated, 3Com registered trademarks are registered in the United

States and may or may not be registered in other countries.

3Com and the 3Com logo are registered trademarks of 3Com Corporation.

All other company and product names may be trademarks of the respective

companies with which they are associated.

ENVIRONMENTAL STATEMENT

It is the policy of 3Com Corporation to be environmentally-friendly in all operations.

To uphold our policy, we are committed to:

Establishing environmental performance standards that comply with national

legislation and regulations.

Conserving energy, materials and natural resources in all operations.

Reducing the waste generated by all operations. Ensuring that all waste conforms to

recognized environmental standards. Maximizing the recyclable and reusable

content of all products.

Ensuring that all products can be recycled, reused and disposed of safely.

Ensuring that all products are labelled according to recognized environmental

standards.

Improving our environmental record on a continual basis.

End of Life Statement

3Com processes allow for the recovery, reclamation and safe disposal of all

end-of-life electronic components.

Regulated Materials Statement

3Com products do not contain any hazardous or ozone-depleting material.

Environmental Statement about the Documentation

The documentation for this product is printed on paper that comes from sustainable,

managed forests; it is fully biodegradable and recyclable, and is completely

chlorine-free. The varnish is environmentally-friendly, and the inks are

vegetable-based with a low heavy-metal content.

About This Manual

Conventions

The manual uses the following conventions:

Symbols

Convention Description

Caution Means reader be careful. Improper operation may cause data loss or

damage to equipment.

Highlight Means an action or information that needs special attention to

ensure successful configuration or good performance.

Note Means a complementary description.

Obtaining Documentation

You can access the most up-to-date 3Com product documentation on the World

Wide Web at this URL: http://www.3com.com.

1 Product Overview

Introduction

The AP9152 is an 802.11n access point (AP) product developed by 3Com Corporation.

The AP9152 can work either as a fat AP to provide wireless access independently or as

a fit AP that operates with a wireless local area network (WLAN) switch or access

controller to provide wireless access for WLAN clients. The factory default configuration

is fat AP mode, and you can change it to fit AP mode.

Hardware Specifications

The physical dimensions and weight of the AP9152:

Physical dimensions (diameter × thickness) Weight

Φ190 × 60 mm (Φ7.48 × 2.36 in.)

Note: Φmeans diameter. 0.5 kg (1.10 lb)

The basic configurations of the AP9152:

Protocols and chassis material Internal antenna Power

consumption

IEEE 802.11a/b/g/n,

single-RF, plastic mold design

2.4 GHz, gain: 6 dBi

5 GHz, gain: 7 dBi 5.9 W to 7 W

LEDs

Descriptions of the LEDs on the AP9152:

LED Color State Description

Steady on The power supply is normal.

POWER Green

Off The power supply is poorly connected or is

working abnormally.

Steady on A link is present.

Off No link is present.

10/100M

(Ethernet

interface

LED)

Green

Blinking Data is being transmitted or received at 10/100

Mbps.

Steady on A link is present.

Off No link is present.

1000M

(Ethernet

interface

LED)

Green

Blinking Data is being transmitted or received at 1000

Mbps.

LED Color State Description

Off The wireless link is not initialized or the link is

faulty.

Blinking

slowly The wireless link is working normally.

2.4G

(Wireless

link LED) Green

Blinking

rapidly Data is being transmitted or received.

Off The wireless link is not initialized or the link is

faulty.

Blinking

slowly The wireless link is working normally.

(Wireless

link LED) Green

Blinking

rapidly Data is being transmitted or received.

Interfaces

The AP9152 provides a console interface and an Ethernet interface.

Note: The AP9152 provides a reset button and a security slot.

Descriptions of the interfaces on the AP9152:

Interface

silkscreen

Standards and

protocols Description

CONSOLE RS/EIA-232

The console interface is used for device

configuration and management.

Default: 9600 baud rate, 8 data bits, no parity,

one stop bit.

The default username and password for

console login are admin and password (case

sensitive) respectively

ETHERNET

IEEE802.3

IEEE802.3u

IEEE802.3af

The Ethernet interface can serve as an uplink

interface to access the Internet and as a PoE

interface at the same time.

Caution: When connecting a cable to an interface, pay attention to the interface

silkscreen to avoid connection mistakes.

2 Preparing for Installation

Unpacking and Inspection

Before unpacking the unit, make sure that the package is intact, without any sign of

damage. When unpacking the unit, avoid excessive force; otherwise, the unit inside the

package may get damaged.

After unpacking the unit, check that all items listed on the packing list are contained. If

any of the items are missing, contact your local dealer immediately.

Temperature and Humidity Requirements

The operating temperature and humidity requirements are as follows:

Specification Range

Operating temperature -10°C to 55°C (14°F to 131°F)

Storage temperature –40°C to +70°C (–40°F to +158°F)

Operating humidity (non-condensing) 5% to 95%

Power Supply

The AP9152 supports PoE power supply.

3 Installing the AP

Note:

1) Make sure that no metal particles (such as screws) fall into the Ethernet or

console interface during installation.

2) Before installing the AP9152 to the wall-mounting bracket, connect the

network cable. The network cable can only be UTP Cat-5.

3) Before connecting the console cable to the AP9152 for debugging or pressing

the reset button, you need to remove the device from the wall-mounting

bracket.

Determining the Installation Site

Determine the installation site by observing the following principles:

zEnsure that there are as few obstacles as possible between the AP and the

wireless stations.

zKeep the AP far away from electronic devices (such as microwave ovens) that

may generate RF noise.

zEnsure that the installation site will not cause any inconvenience or nuisance.

Note:

1) Make sure the ceiling is strong enough and the structure is suitable for ceiling

mounting. Reinforce the ceiling if needed.

2) Use a Kensington lock if physical security is required to protect the AP from

being stolen.

Installing the AP

The AP9152 supports three installation methods:

zMounting the AP on a Wall

zMounting the AP on a Ceiling

zMounting the AP to a T-Rail

Mounting the AP on a Wall

The following describes how to mount the AP9152 on a wall:

zInstalling the wall-mounting bracket on the wall

zInstalling the AP on the wall-mounting bracket

zLocking the AP onto the wall-mounting bracket (optional)

Installing the wall-mounting bracket on the wall

Step1 Place the wall-mounting bracket tightly against the wall where the AP is to be

mounted and mark the locations to drill holes for installing the screws. Then use

a drill with a bit of 6 mm (1/4 in.) in diameter to drill holes in the wall. The hole

pattern must be identical with that in the wall-mounting bracket.

Highlight:There are five mounting holes in total in the wall-mounting bracket of the

AP9152. Select the three round holes (with a diameter of 5 mm, or 0.20 in.) for the

installation.

Figure1 Mounting hole pattern of the AP9152 wall-mounting bracket:

Step2 Insert the pointed ends of wall anchors into the drilled holes and tap the flat

ends of wall anchors with a rubber hammer until they are all flush with the wall

surface.

Step3 Align the holes in the wall-mounting bracket with the wall anchors and insert

screws through the mounting holes into the wall anchors, as shown in Figure2.

Figure2 Install the wall-mounting bracket of the AP9152

(1) Drilled hole (2) Wall anchor (3) Wall-mounting bracket

(4) Key-hole clip (5) Screw

Step4 Adjust the position of the wall-mounting bracket and tighten the screws.

Note: Install the wall-mounting bracket with the arrow on the bracket pointing upwards.

Installing the AP on the wall-mounting bracket

Step1 Align the -shaped holes on the AP’s rear panel with the key-hole clips on the

wall-mounting bracket and hang the AP on the bracket. See callout 1 in

Figure3.

Step2 Rotate the AP to fix it. See callout 2 in Figure3. Fix the -shaped holes on the

AP’s rear panel to the key-hole clips on the wall-mounting bracket.

Figure3 Fix the AP9152 onto the wall-mounting bracket

Note: Rotating the AP9152 clockwise installs the device, while rotating it

counterclockwise uninstalls it.

Locking the AP onto the wall-mounting bracket (optional)

The AP9152 has a security slot on the upper left side, which can be used to lock the AP

to a fixed object to prevent theft. Follow these steps to lock the AP to a fixed object:

Step1 Fix the security cable to a nearby fixed object.

Step2 Insert the locking plate in the security slot to lock the AP.

Figure4 Lock the AP9152 to a fixed object

(2)

(3)

(1)

Before installing the security lock: (1) Security slot

(2) Security lock

After installing the security lock: (3) Security cable

Note: The lock is user supplied.

Mounting the AP on a Ceiling

Note:

1) To use this installation method, make sure that the thickness of the ceiling is

less than 18 mm (0.71 in.), and the ceiling can bear the weight of at least 5 kg

(11.02 lb).

2) You are not recommended to use this method to mount the AP to a location

made of low-intensity materials such as a plaster ceiling. If this installation

method is required in such an environment, put a high-intensity plate beneath

the nut to secure the installation.

Select the two mounting holes of the wall-mounting bracket as shown in Figure5 to

mount the AP on the ceiling (in mm). Follow these steps to mount the AP on the ceiling:

Step1 Drill two holes in the ceiling corresponding to the two mounting holes in the

wall-mounting bracket.

Figure5 Mounting holes on the wall-mounting bracket

(1) Mounting holes for mounting the AP on a ceiling

Step2 Insert the bolts through the mounting holes of the wall-mounting bracket and

the drilled holes on the ceiling, and then tighten the nuts on the other side of the

ceiling to secure the wall-mounting bracket as shown in Figure6.

Figure6 Mount the wall-mounting bracket on the ceiling

(1) Bolt inside the ceiling (2) Washer (3) Nut

(4) Wall-mounting bracket (5) Bolt cap (6) Key-hole clip

Step3 Mount the AP9152 to the wall-mounting bracket. For details, refer to Installing

the AP on the wall-mounting bracket.

Mounting the AP to a T-Rail

Note: The width of the T-rail must be in the range of 14 mm (0.55 in.) to 24 mm (0.94

in.).

Follow these steps to mount the AP to a T-rail:

Step1 Loosen the two M3 × 6 screws on each clip holder until the screw heads are

Andere Handbücher für AP9152

Inhaltsverzeichnis

Sprachen:

Andere 3Com Drahtloser Zugangspunkt Handbücher

3Com

3Com 8760 - Wireless Dual Radio 11a/b/g PoE Access... Bedienungsanleitung

3Com

3Com 7608 Bedienungsanleitung

3Com

3Com 3CRWX275075A - Wireless LAN Managed Access Point... Bedienungsanleitung

3Com

3Com WL-455 Bedienungsanleitung

3Com

3Com AP9152 Bedienungsanleitung

3Com

3Com 7250 Bedienungsanleitung

3Com

3Com 3CRWX395075A - Wireless LAN Managed Access Point... Bedienungsanleitung

3Com

3Com OfficeConnect 3CRWE454G75 Bedienungs- und Wartungsanleitung

3Com

3Com OfficeConnect 3CRWE454G72 Bedienungsanleitung

3Com

3Com Wireless 11n USB Adapter Bedienungsanleitung

3Com

3Com MAP 2750 Bedienungsanleitung

3Com

3Com AP9152 Bedienungsanleitung

3Com

3Com LANplex 6000 Bedienungsanleitung

3Com

3Com 8000 Bedienungsanleitung

3Com

3Com 8760 - Wireless Dual Radio 11a/b/g PoE Access... Bedienungsanleitung

3Com

3Com OfficeConnect 3CRWE454A72 Bedienungsanleitung

3Com

3Com 3CRWE920G73 Bedienungsanleitung

3Com

3Com OfficeConnect 3CRWE41196 Bedienungsanleitung

3Com

3Com 7760 - Wireless 11a/b/g PoE Access Point Bedienungsanleitung

3Com

3Com AirConnect Bedienungsanleitung

3Com

3Com 3CRWE675075 - 11a/b/g Wireless LAN Workgroup... Bedienungsanleitung

3Com

3Com Wireless LAN 11 Mbps Bedienungsanleitung

3Com

3Com 3CRWE825075A Bedienungsanleitung

3Com

3Com 3CRWX315075A - Wireless LAN Managed Access Point... Bedienungsanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation NSM2 Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung