A-EON A310B Bedienungsanleitung

A310B Fingertip Pulse Oximeter

Operator’s Manual

File No.: A310B-OPE V 1.0 20180712

A310B Pulse Oximeter

Section 1

Safety

Instructions for the Safe Operation and Use of the

A310B Pulse Oximeter

Do not attempt to service the A310B Pulse Oximeter. Only

qualified service personnel should attempt any needed

internal servicing.

Prolonged use or the patient’s condition may require

changing the sensor site periodically. Change sensor site

and check skin integrity, circulatory status and correct

alignment at least every 2 hours.

SpO2 measurements may be adversely affected in the

presence of high ambient light. Shield the sensor area

(with a surgical towel, or direct sunlight, for example) if

necessary.

The following reason will cause interference to the testing

accuracy of the pulse oximeter.

High-frequency electrosurgical equipment.

Placement of a sensor on an extremity with a blood pressure

cuff arterial catheter, or intravascular line

The patient has hypotension severe vasoconstriction severe

anemia or hypothermia.

The patient is in cardiac arrest or is in shock.

Fingernail polish or false fingernails may cause inaccurate

SpO2 readings.

A310B Pulse Oximeter

1.2 Warnings

WARNING: EXPLOSION HAZARD —Do not use the A310B

in a flammable atmosphere where concentrations of flammable

anesthetics or other materials may occur.

WARNING: Do not attempt to recharge normal dry-cell

batteries, they may leak. And may cause a fire or even

explode.

And may cause a fire or even explode.

WARNING: Do not throw batteries in fire as this may causes

them to explode.

CAUTION: Keep the operating environment free of dust,

vibrations, corrosive, or flammable materials, and extremes of

temperature and humidity.

CAUTION: Do not operate the unit if it is damp or wet because

of condensation or spills. Avoid using the equipment

immediately after moving it from a cold environment to a

warm, humid location.

WARNING: .Do not use the pulse oximeter in an MRI or CT

environment.

WARNING: Do not modify this equipment without

authorization of the manufacturer.

WARNING: If this equipment is modified, appropriate

inspection and testing must be conducted to ensure continued

safe use of equipment.

A310B Pulse Oximeter

CAUTION: Never use sharp or pointed objects to operate the

front-panel switches.

CAUTION: The device shall only be used if the battery cover is

closed.

CAUTION: The batteries must be proper disposed according to

local regulation after their use.

CAUTION: The batteries must be taken out from the battery

compartment if the device will not be used for a long time.

CAUTION: The device should keep away from the children,

pets and pests to avoid swallowing.

A310B Pulse Oximeter

1.3 Definitions and Symbols

Symbol

Description

Type BF Equipment

Batch code*

Date of manufacture*

Serial NO*

Information of manufacture, including

name and address

Temperature limitation

Bluetooth Indication

When the end-user wishes to discard this

product, it must be sent to separate

collection facilities for recovery and

recycling

A310B Pulse Oximeter

Follow instruction for use

IP22

Anti-dust& Anti-water class

Warning

：

The information you should know to

protect patients and medical staff from

possible injury

Caution

：

The information you should know to

protect the equipment from possible

damage

Note

：

The important information you should

know

*Batch code, Date of manufacturer and Serial No are printed on

the label on the battery cover.

Section 2

Introduction

2.1 General

This chapter provides a general description of the A310B Pulse

Oximeter including:

Brief device description

Product features

2.2 Brief Device Description

A310B Pulse Oximeter

The Pulse Oximeter, based on all digital technology, is intended

for noninvasive spot-check measurement of functional oxygen

saturation of arterial hemoglobin (SpO2). Advanced DSP algorithm

can minimize the influence of motion artifact and improve

measurement accuracy of low perfusion.

The Oximeter can be used to measure human Hemoglobin

Saturation and heart rate through finger. The product is suitable

for family, hospital (including clinical use in internist/surgery,

Anesthesia, pediatrics, intensive care and etc.) Oxygen Bar, social

medical organizations, physical care in sports and etc.

2.3 Product Features

Lightweight for carrying and Easy-To-Use.

Manually adjust the direction of interface .

Color OLED display, simultaneous display for testing

value and plethysmogram.

Low Perfusion : 0.2%. (Advanced DSP algorithm can

improve measurement accuracy, under the condition of low

perfusion.)

Visual & Sound alarm function. Real-time spot-checks.

Wireless Bluetooth for data transmission.

Low Battery voltage indicator.

Automatically switch off.

Standard two AAA 1.5V Alkaline Bаttеrу support more

than 20 hours continuous work.

A310B Pulse Oximeter



*DSP algorithm: Digital signal processor algorithm.

CAUTION: The device cannot be used to measure the child

below 1 years as the test result is not guarantee to accurate.

CAUTION: The fingertip pulse oximeter is intended only as an

adjunct in patient assessment. It must be used in conjunction

with other methods of assessing clinical signs and symptoms

CAUTION: A function tester cannot be used to assess the

accuracy of a pulse oximeter monitor or sensor.

Clinical testing is used to establish the SpO2 accuracy. The

measured arterial hemoglobin saturation value (SpO2) of the

sensor is compared to arterial hemoglobin oxygen(SaO2) value,

determined from blood samples with a laboratory CO-oximeter.

The accuracy of the sensors in comparison to the CO-oximeter

samples measured over the SpO2 range of 70 -100%. Accuracy

data is calculated using the root-mean-square(Arms value) for

all subjects. Only about two-thirds of PULSE OXIMETER

EQUIPMENT measurements can be expected to fall within

±Arms of the value measured by a CO-Oximeter.

Pulse simulator shall be used to assess Pulse rate

Accuracy. The measured pulse rate is compared to the preset

pulse rate value in simulator. Accuracy data is calculated using

the root-mean-square (Arms value) for all subjects.

A310B Pulse Oximeter

*Low Perfusion: In physiology, perfusion is the process of a body delivering blood to a capillary

bed in its biological tissue. Under the condition of low perfusion, the measurement of

non-invasive saturation of pulse-blood oxygen is low-accurate.

*Plethysmograph: is an instrument for measuring changes in volume within an organ or

whole body (usually resulting from fluctuations in the amount of blood or air it contains).

Section 3

Installation,Setup,and Operation

3.1 Description of the Front Panel (as figure 3.1.1)

Figure 3.1.1 Parts of front & back panel

Table 3.1.1 Part Definition and Description

A310B Pulse Oximeter

Item

Name

Description

Power button

Turn on the machine

OLED Panel

Display the SPO2/PR

data &

Plethysmogram,etc.

Battery Compartment

3.2.Display

After switch on, the OLED display of A310B is as follows:

Figure 3.2.1 OLED display

Battery Capacity

Inhaltsverzeichnis

Andere A-EON Medizinische Geräte Handbücher

A-EON

A-EON A310L Bedienungsanleitung

Beliebte Medizinische Geräte Handbücher anderer Marken

TekTone

TekTone Tek-CARE160 Bedienungsanleitung

NeuroMetrix

NeuroMetrix Quell 2.0 Bedienungsanleitung

AMT

AMT XLR8 Bedienungsanleitung

Medipost-Nutristoma

Medipost-Nutristoma MD300K2 Bedienungsanleitung

EDAN

EDAN SONOTRAX Pro Bedienungsanleitung

Restorative Therapies

Restorative Therapies RT300 Bedienungsanleitung

Gendex

Gendex Expert DC Bedienungsanleitung

Dexcowin

Dexcowin ADX4000W Bedienungsanleitung

Libelium

Libelium MySignals Bedienungsanleitung

Acelity

Acelity V.A.C.ULTA 4 Bedienungsanleitung

Caputron

Caputron ActivaDose II tDCS Bedienungsanleitung

FujiFilm

FujiFilm Sonart Betriebsanleitung

Plinth 2000

Plinth 2000 93CDT Bedienungsanleitung

GE SENOGRAPHE 800T Bedienungsanleitung

GE Definium 5000 Bedienungsanleitung

Kanmed

Kanmed GE-1380 Bedienungsanleitung

Huntleigh

Huntleigh FD1 Bedienungsanleitung

Stryker

Stryker SPR Plus Bedienungsanleitung