A.O. Smith Jaguar HSE-SCJ-006 Bedienungsanleitung

Water Heater

HSE-SCJ-006 / HSE-SCJ-010

Size: 210mm (H) x 148mm (W)

Part No.: 324041-000_R0

Approved on: 16-07-2012

User Guide

* Conditions Apply

ADVANCED TECHNOLOGY

Blue Diamond glass lined tank. Maximum

protection against hard water and corrosion.

ENERGY SAVING

BEE 5 star rating. The most energy efficient

water heater you can buy.

CHANGEABLE DECORATIVE PANELS

4 colour options to match the bathroom décor.

LONGER WARRANTIES

7 years warranty on inner tank, 4 years warranty on glass coated heating element & 2 years

comprehensive.

MADE BETTER

Made in India’s most modern and advanced water heater factory.

 Exciting new model

 Higher energy saving

About A. O. Smith?

In 1936, A. O. Smith developed and patented a process to glass-line water heaters. Over the

years, A. O. Smith has gained the respect and support of homeowners, contractors, architects

and specifying engineers in over 60 countries by providing innovative energy efficient products

designed for years of trouble-free service.

Today, A. O. Smith Water Products Company, one of the largest water heater manufacturer in

the world, is a global leader in innovative technology and energy efficient solutions.

A. O. Smith India Water Heating Private Limited was established in 2005. Since this time, the

A. O. Smith team has conducted numerous focus group studies and spent an endless number

of research hours determining what India wanted in a water heater. Backed by 75 years of

proven technological advances, A. O. Smith India has created a stylish design with features

demanded by the Indian consumer.

The A. O. Smith plant with manufacturing facilities spread over 76,000 sqft, is located on 20

acres, just outside Bengaluru, in the Harohalli Industrial Area. At India operations is the 16th

A. O. Smith manufacturing facility worldwide. A. O. Smith's plant at Bengaluru, India has

extensive engineering and technical resources and has the latest technologies incorporated.

A. O. Smith is the first and only manufacturer to invest in and produce glass lined water heaters

in India. Today A. O. Smith India produces 85% of its products in India. The balance 15% is

imported from A. O. Smith facilities in Europe, US and its highly automated plant in China

where A. O. Smith is the number 1 brand.

What's in the box?

Electric

Water Heater

Wall Mounting

Accessories

Drain Pipe

User Guide

Contents

Specifications ......................................................................................... 1

Key Features ........................................................................................... 2

Installation.............................................................................................. 3

Directions for use ................................................................................... 5

A. O. Smith ColourMatch System ........................................................ 6

Changing the Decorative Front Panel ................................................... 6

Troubleshooting ..................................................................................... 7

Circuit Diagram ...................................................................................... 7

Warranty Card ........................................................................................ 8

Jaquar & Co. Ltd. ~ Contact details.................................................... 14

Specifications

Model HSE-SCJ-006 HSE-SCJ-010

Volume [L] 6 10

Power [W] 2000 2000

Voltage/Frequency [V/Hz] ~230/50 ~230/50

Actual Stdg. Loss [kWh/24h/45°C diff.] 0.390 0.490

Max. Stdg. Loss [kWh/24h/45 C diff.]

[as per IS 2082:1993 amended in 2002] 0.792 0.990

Reheating Time for 35°C rise [in min] 8 16

Temperature range [°C] 25-75 25-75

Rated water pressure N/cm 80 80

Water head (meters) 80 80

Inlet/Outlet connections [Inch] ½ ½

Dimensions

Caution: *Safety valve has been factory fit with the water heater and set at 0.8 MPa

(8 Bar) rated pressure.

Warning: Do not tamper or detach the safety valve from the water heater.

1 Outlet

2 Inlet

3 Safety Valve*

4 Thermostat Knob

5 Decorative Front Panel

6 Front Jacket

7 Back Jacket

8 Anode

9 Heating Element

10 Tank

11 Installation Bracket

12 PU Insulation

13 Thermal Cutout

Part Descriptors

Model HSE-SBS HSE-SBS

-006 -010

A [mm] 319 386

B1 [mm] 319 386

B2 [mm] 346 412

B3 [mm] 380 447

C [mm] 285 309

Key Features

Blue Diamond technology increases the life of the water heater. The lining is

stronger and more corrosion resistant than any other in the industry.

Blue Diamond Glass Lining

Scale and sediment build-up on the surface of the element can lead to

premature failure. A. O. Smith Glass Coating helps to prevent scale formation

and extends the life of the heating element.

Glass Coated Element

The tank has an anode rod system with a stainless steel core that is designed

to protect the tank from corrosive elements. The system uses a special cathodic

action to fight the corrosive elements and thus prolongs the life of the water

heater.

Anode Rod

The temperature control knob allows you to set the temperature between

25°C to 75°C.

Temperature Control Knob

The safety valve is designed to automatically relieve and discharge water in case

the pressure or temperature overshoots the preset limits.

Safety Valve

In case a fault occurs and the water temperature exceeds the highest preset

temperature, the breaker rapidly cuts off the live line and the neutral line

simultaneously to assure safety.

Thermal Cutout

Note: A. O. Smith Jaquar reserves the right to amend or modify the specifications and

features at any time, as and when required without any prior notification.

Installation

Mounting

Plumbing

1. Make sure that the wall can withstand at least twice

the weight of the water heater when completely

filled with water.

2. Before locating the position for installation of the

water heater, make sure that there is sufficient

clearance between the ceiling and the side wall.

(Fig. 1)

3. Use a drill bit with diameter of 10mm to drill 4 holes

at least 90mm deep in the wall (Fig. 3). The four

holes should be aligned horizontally and vertically.

The horizontal distance between the 2 holes should

be 120mm and the vertical distance should be

57mm. (Fig. 2)

4. Insert the expansion anchors into the holes. Place the

wall mounting bracket over the expansion anchors

and tighten the screws on the bracket. (Fig. 3)

5. Place the water heater on wall mounting bracket (Fig. 4)

using hanger hooks. Tug downwards on the heater to

ensure that the water heater is fixed steadily.

1. Make necessary plumbing with reference to the installation diagram. (Fig. 5)

2. A. O. Smith recommends nylon braided hoses having a minimum pressure rating of 8 Bar

and hoses should be compatible for hot water applications.

3. Connect the cold water pipe to the inlet [Blue Cap].

4. Connect the hot water pipe to the outlet [Red Cap].

5. Attach the discharge tube to safety valve as shown in installation diagram. (Fig. 5)

Attention: Make sure a suitable sealing tape is used for all connections to prevent leakage.

Fig. 1 Position for installation Fig. 2 Wall mounting bracket

Wall

Fig. 3 Installation of

wall mounting bracket

Fig. 4 Inserting the water heater

into mounting bracket

Wall Water

Heater

Water

Heater

Wall

Water

Heater

Wall

Water heater

Wall

Ceiling

1. Open a hot water faucet nearby to permit the air to escape.

2. Open the cold water inlet valve fully, filling the heater and the piping.

3. Close the hot water faucet when water flows.

4. Check all the connections to see if there is any leakage. In case of a leakage, drain the

heater completely, repair the leaking joint and then refill the heater.

Water Filling

*Flexible Hoses to be procured by the customer, not part of standard product.

Electrical Connections

The power cord and plug are connected with this water heater. Find a separate socket for

power plug and make sure the socket is in firm contact with the plug. Ensure that reliable

earthing has been done.

Caution:

• Connect the water heater using independent sockets, do not use adapters. Use

multimeter to check whether the live line and neutral line are not reverse, to ensure

complete safety.

• Before installing the water heater, confirm that the power of water heater matches

electric meter capacity and supply wire.

• The water heater should be earthed reliably. It is prohibited to connect the earth wire

to neutral wire or tap water pipe.

Fig. 5 Installation diagram

Hot Water Tap

Cold Water Tap

Discharge Tube

*Flexible Hose

*Flexible Hose Lever

To Drain

Safety Valve

Blue Cap

Red Cap

For draining water from the water heater, following steps

needs to be followed:

1. Switch off the electric supply to the water heater.

2. Open the hot water taps until the water is not hot any

more.

3. Close cold water supply.

4. Drain the water by moving the lever of safety valve in the

direction of the arrow as indicated in the diagram. (Fig. 6)

Draining

Fig. 6 Safety valve

Caution: Once the mounting, plumbing, discharge tube, power connection and water filling

is completed, then only the power supply should be given.

Caution: Before using the water heater, make sure that it should be completely filled

with water.

Please turn off the power supply to the water heater prior to draining

the water heater.

Warning: This water heater should not be operated with insufficient amount of water.

Failure to do so may result in damage to the water heater & injuries to the users.

This will also make the warranty null & void.

Directions for use

1. Switch on the water heater’s power supply.

The green indicator light glows.

2. Turn the thermostat knob clockwise for the

device to commence heating and change

the set temperature. A red light will glow.

[The set temperature increases if the

thermostat knob is turned clockwise.]

Temperature can be set in the range of

25°C to 75°C. Recommended to keep

thermostat knob notch position always in

medium or above level.

3. The red light’s switching off indicates the

heater has been heated to the set

temperature.

Caution: Before using the water heater, make sure the inner tank is completely filled with

water and the power plug has been connected properly.

Fig. 7

A. O. Smith ColourMatch System

Fig. 8 Removing front panel

Pull out the Knob Remove the Decorative

Front Panel to change

Please follow the instructions as shown in Fig. 8

Changing the Decorative Front Panel

Warning:

• Please ensure to switch off the power supply while changing the Decorative Front

Panel and pull out the power plug from the socket.

• An insulation layer is provided below the front panel which should not be replaced.

• While changing the front panel ensure that none of the internal components are

damaged or removed.

Unscrew

Attention: The product of your choice comes with either blue or red brick as a front panel

of the white or ivory body respectively. You have the option of changing this

panel to match your bathroom décor.

A. O. Smith ColourMatch System allows you to match your water heater to the colour of

your bathroom.

Please visit www.jaquar.com and choose your Decorative Front Panel colour options.

Troubleshooting

Problem Possible Cause(s) Solution

• Green and Red No power to heater Turn on electrical switch. Check for

light off blown fuses or tripped breaker

• No hot water Thermal cutout switch open Press Reset button

Control circuit or internal Call Customer Care Centre

wiring error

• Green light on Non-functioning Call Customer Care Centre

Red light off thermostat

• No hot water Control circuit or internal

wiring error

• Water temperature Thermostat set is too high Call Customer Care Centre

is too high Thermostat may need to be replaced

Thermal cutout trips Call Customer Care Centre

• Water heats slowly Non-functioning element Call Customer Care Centre

Element may need to be replaced

• Thermostat does Non-functioning Call Customer Care Centre

not shut off thermostat Thermostat may need to be replaced

Improper calibration Call Customer Care Centre

Thermostat may need to be replaced

• Piping connection Connection not sealed Call plumber

leaks

• Leaky cover Tank or parts leak Shut off power immediately and

Call Customer Care Centre

Circuit Diagram

Element

Red Red Brown

BlackBlack

Thermostat

Green/Yellow

Black

White White

Thermal cutout

Green light Red light

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere A.O. Smith Boiler Handbücher

A.O. Smith

A.O. Smith PGX 30, PGX 40, PGX 50, PGXH 30, PGXH 40, PGXH 50, PGR 30, PGR 40, PGR 50, PGXL 30, PGXL... Bedienungsanleitung

A.O. Smith

A.O. Smith HSE-VAS025 Bedienungsanleitung

A.O. Smith

A.O. Smith Commercial gas water heaters Bedienungsanleitung

A.O. Smith

A.O. Smith del and del Bedienungsanleitung

A.O. Smith

A.O. Smith T-H2-DV Bedienungsanleitung

A.O. Smith

A.O. Smith Power-Vent BTV-100 Bedienungsanleitung

A.O. Smith

A.O. Smith HSE-SES-025 Bedienungsanleitung

A.O. Smith

A.O. Smith EWS 10 Bedienungsanleitung

A.O. Smith

A.O. Smith FDV Bedienungsanleitung

A.O. Smith

A.O. Smith 52 Bedienungsanleitung

A.O. Smith

A.O. Smith GPD-40 Bedienungsanleitung

A.O. Smith

A.O. Smith BFM 30 Bedienungsanleitung

A.O. Smith

A.O. Smith ARESS00606 Bedienungsanleitung

A.O. Smith

A.O. Smith Duraclad Lime Tamer Bedienungsanleitung

A.O. Smith

A.O. Smith IT - 1000 Bedienungsanleitung

A.O. Smith

A.O. Smith XWH 150 Anleitung zur Verwendung

A.O. Smith

A.O. Smith EWJ 15 Bedienungsanleitung

A.O. Smith

A.O. Smith CAWH 8-455-6 Fehlerbehebungshandbuch

A.O. Smith

A.O. Smith BTH 120 Series Anleitung zur Verwendung

A.O. Smith

A.O. Smith Voltex Produktinformationsblatt

A.O. Smith

A.O. Smith EWJH 15 Bedienungsanleitung

A.O. Smith

A.O. Smith ADMR - 40 Fehlerbehebungshandbuch

A.O. Smith

A.O. Smith Innovo IR 12-160 Fehlerbehebungshandbuch

A.O. Smith

A.O. Smith SGS-28 Fehlerbehebungshandbuch

Beliebte Boiler Handbücher anderer Marken

Kenmore

Kenmore 153.582400 Bedienungsanleitung

STIEBEL ELTRON

STIEBEL ELTRON Eltronom SHU 5 S Bedienungsanleitung

clage

clage E-Mini Series Bedienungsanleitung

Toyotomi

Toyotomi Oil Miser OM-180 Bedienungsanleitung

Bradford White

Bradford White EF Series Bedienungsanleitung

Eccotemp

Eccotemp 40-H Bedienungsanleitung

Dimplex

Dimplex ECSd125-580 Leitfaden

Dux

Dux 32FCR6N Bedienungsanleitung

Noritz

Noritz N-132M Gebrauchsanweisung

TESY

TESY GCV7/4S 10047 Technisches Datenblatt

Toyotomi

Toyotomi Oil Miser OM-148 (Type D) Fehlerbehebungshandbuch

Koryo

Koryo KWHZF15Y Bedienungsanleitung

Pentair

Pentair PSC-14-4-02 Bedienungsanleitung

GE 40M06AAG Montageanleitung

Thermor

Thermor AEROMAX SPLIT 2 Bedienungsanleitung

American Hometec

American Hometec AHQ-B03X Bedienungsanleitung

PVI

PVI MAXIM Bedienungsanleitung

Sunerg Solar Energy

Sunerg Solar Energy Calor Top 200D Betriebsanleitung