A.O. Smith Jaguar HSE-SCJ-015 Bedienungsanleitung

Water Heater

HSE-SCJ-015 / HSE-SCJ-025

ADVANCED TECHNOLOGY

Blue Diamond glass lined tank. Maximum protection

against hard water and corrosion.

GLASS COATED DUAL HEATING ELEMENTS

Heats water faster and lasts longer. Flexible heating

options.

MORE FEATURES & USER CONTROLS

Wireless remote control, temperature settings,

ON/OFF timers, energy meter...

ENERGY SAVING

BEE 5 star rating. The most energy efficient water heater you can buy.

CHANGEABLE DECORATIVE PANELS

4 colour options to match the bathroom décor.

LONGER WARRANTIES

7 years warranty on inner tank, 4 years warranty on glass coated heating element & 2 years comprehensive.

MADE BETTER

Made in India’s most modern and advanced water heater factory.

Size: 210mm (H) x 148mm (W)

Part No.: 324173-000_R0

Approved on: 17-07-2012

User Guide

 Exciting new model

 Higher energy saving

 Handy wireless remote control

What's in the box?

Electric

Water Heater

Wall Mounting

Accessories

Battery

User Guide

Drain Pipe

Contents

Remote & Holder

1.5V

Specifications........................................................................................ 1

Key Features.......................................................................................... 2

Installation............................................................................................ 3

Control panel operations..................................................................... 5

Wireless remote operations................................................................. 6

Directions for use ................................................................................. 7

Timer Explanation ................................................................................ 10

A. O. Smith ColourMatch System ....................................................... 11

Changing the Decorative Front Panel ................................................. 11

Troubleshooting ................................................................................... 12

Circuit Diagram .................................................................................... 12

Warranty Card ...................................................................................... 13

Jaquar & Company Limited.................................................................. 19

HPW: Available in 60 & 80 litre capacities

Air2Heat Water Heaters

HPW-60, 80 Litres

Specifications

Dimensions

Caution: *Safety valve has been factory fit with the water heater and set at 0.8 MPa

(8 Bar) rated pressure.

Warning: Do not tamper or detach the safety valve from the water heater.

1 Outlet

2 Inlet

3 Safety Valve*

4 Electronic User interface

5 Decorative Front Panel

6 Front Jacket

7 Back Jacket

8 Anode

9 Heating Element

10 Tank

11 Installation Bracket

12 PU Insulation

13 Thermal Cutout

Part Descriptors

Model HSE-SCJ HSE-SCJ

-015 -025

A [mm] 386 444

B1 [mm] 386 444

B2 [mm] 410 478

B3 [mm] 444 513

C [mm] 349 391

Model HSE-SCJ-015 HSE-SCJ-025

Volume [L] 15 25

Power [W] 3000/2000/1000 3000/2000/1000

Voltage/Frequency [V/Hz] ~230/50 ~230/50

Actual Stdg. Loss [kWh/24h/45°C diff.] 0.560 0.690

Max. Stdg. Loss [kWh/24h/45 C diff.]

[as per IS 2082:1993 amended in 2002] 1.138 1.386

Reheating Time for 35°C rise [in min] 18 31

Temperature range [°C] 25-75 25-75

Rated water pressure N/cm 80 80

Water head (meters) 80 80

Inlet/Outlet connections [Inch] ½ ½

Key Features

Blue Diamond technology increases the life of the inner tank. The lining is

stronger and more corrosion resistant than any other in the industry.

Blue Diamond Glass Lining

The tank has an anode rod system with a stainless steel core that is designed

to protect the tank from corrosive elements. The system uses a special cathodic

action to fight the corrosive elements and thus prolongs the life of the water

heater.

Anode Rod

The safety valve is designed to automatically relieve and discharge water in case

the pressure or temperature overshoots the preset limits.

Safety Valve

Glass Coated Dual Heating Element provide extended life to the water heater by

preventing Scale Formation on the element surface. They help in quick water

heating.

The LED displays electricity consumed, set temperature, actual temperature,

timer etc. The user can select the set temperature within the range of 25°C to

75°C. This water heater can retain the set information for 72 hours, even in

power off condition.

Digital Controls

In case a fault occurs and the water temperature exceeds the highest preset

temperature, the breaker rapidly cuts off the live line and the neutral line

simultaneously to assure safety.

Thermal Cutout

Note: A. O. Smith Jaquar reserves the right to amend or modify the specifications and

features at any time, as and when required without any prior notification.

Glass Coated Dual Heating Element

Installation

Mounting

Plumbing

1. Make sure that the wall can withstand at least twice

the weight of the water heater when completely

filled with water.

2. Before locating the position for installation of the

water heater, make sure that there is sufficient

clearance between the ceiling and the side wall.

(Fig. 1)

3. Use a drill bit with diameter of 10mm to drill 4 holes

at least 90mm deep in the wall (Fig. 3). The four

holes should be aligned horizontally and vertically.

The horizontal distance between the 2 holes should

be 120mm and the vertical distance should be

57mm. (Fig. 2)

4. Insert the expansion anchors into the holes. Place the

wall mounting bracket over the expansion anchors

and tighten the screws on the bracket. (Fig. 3)

5. Place the water heater on wall mounting bracket (Fig. 4)

using hanger hooks. Tug downwards on the heater to

ensure that the water heater is fixed steadily.

1. Make necessary plumbing with reference to the installation diagram. (Fig. 5)

2. A. O. Smith recommends nylon braided hoses having a minimum pressure rating of 8 Bar

and hoses should be compatible for hot water applications.

3. Connect the cold water pipe to the inlet [Blue Cap].

4. Connect the hot water pipe to the outlet [Red Cap].

5. Attach the discharge tube to safety valve as shown in installation diagram. (Fig. 5)

Attention: Make sure a suitable sealing tape is used for all connections to prevent leakage.

Fig. 1 Position for installation Fig. 2 Wall mounting bracket

Wall

Fig. 3 Installation of

wall mounting bracket

Fig. 4 Inserting the water heater

into mounting bracket

Wall Water

Heater

Water

Heater

Wall

Water

Heater

Wall

Ceiling

Water heater

1. Open a hot water faucet nearby to permit the air to escape.

2. Open the cold water inlet valve fully, filling the heater and the piping.

3. Close the hot water faucet when water flows.

4. Check all the connections to see if there is any leakage. In case of a leakage, drain the

heater completely, repair the leaking joint and then refill the heater.

Water Filling

*Flexible Hoses to be procured by the customer, not part of standard product.

Electrical Connections

The power cord and plug are connected with this water heater. Find a separate socket for

power plug and make sure the socket is in firm contact with the plug. Ensure that reliable

earthing has been done.

Caution:

• Connect the water heater using independent sockets. Do not use adapters. Use

multimeter to check whether the live line and neutral line are not reverse, to ensure

complete safety.

• Before installing the water heater confirm that the power of water heater matches

electric meter capacity and supply wire.

• The water heater should be earthed reliably. It is prohibited to connect the earth wire

to neutral wire or tap water pipe.

Fig. 5 Installation diagram

Hot Water Tap

Cold Water Tap

Discharge Tube

*Flexible Hose

*Flexible Hose Lever

To Drain

Safety Valve

Blue Cap

Red Cap

Caution: Once the mounting, plumbing, discharge tube and water filling is completed, then

only the power supply should be given.

For draining water from the water heater, following steps

needs to be followed:

1. Switch off the electric supply to the water heater.

2. Open the hot water taps until the water is not hot any

more.

3. Close cold water supply.

4. Drain the water by moving the lever of safety valve in the

direction of the arrow as indicated in the diagram. (Fig. 6)

Draining

Fig. 6 Safety valve

Caution: Before using the water heater, make sure that it should be completely filled with

water.

Please turn off the power supply to the water heater prior to draining the water

heater.

Warning: This water heater should not be operated with insufficient amount of water.

Failure to do so may result in damage to the water heater & injuries to the users.

This will also make the warranty null & void.

Control panel operations

Fig. 7 Using control panel

Indicator glows when the

heating is in progress.

To decrease the Set

Temperature (normal mode)

To increase the Set

Temperature (normal mode)

Infra-Red rays connecting

the water heater and the

wireless remote

To switch ON/OFF the heater.

While switched on the

display shows the water

temperature as shown

above.

The LED display shows:

• Displays actual and set

temperature; indication

of timers and power

consumed.

To switch ON/OFF the heater.

While switched on the

display shows the water

temperature shown in Fig. 9.

To increase the set

temperature (normal mode),

time (when the Auto ON /

Auto OFF or Clock Set) is

pressed.

To select the power option

i.e, 1000W, 2000W or

3000W.

To set the ON time for the

water heater. Refer page 8.

To set the OFF time for the

water heater. Refer page 8.

To set the Real Time Clock.

Refer page 9.

To switch ON the water

heater instantly in timer

mode.

To display the total energy

consumption of the water

heater.

To decrease the set

temperature (normal mode),

time (when the Auto ON /

Auto OFF or Clock Set) is

pressed.

Wireless remote operations

Fig. 8 Using wireless remote

Directions for use

Caution:

• Before using the water heater, make sure the inner tank is completely filled with water

and the power plug has been connected properly.

• The wireless remote works with two AAA/1.5V cells.

• Ensure that the wireless remote does not get in direct contact with water. Do not

operate the remote with wet hands.

1. Initial power

When the water heater power supply plug is connected, it is in

initial power on state. The LED display on the control panel will

glow and goes off as shown in Fig. 9.

2. Power ON/OFF

To switch on/off the water heater press ON/OFF key on the

control panel or “ ” on wireless remote. While switched on the

LED display shows actual temperature of the water as shown in

Fig. 10.

Note: The heating indicator glows when the heating element in

switched on.

3. Clock setting

The clock is Real Time Clock. Press “Set Clock” key, the hour time

(first two digits) starts blinking. Adjust the hour time by pressing

““ or ““ keys and press “Set Clock” key to set the hour time

and minutes time (last two digits) starts blinking. Adjust the

Minute time by pressing ““ or ““ keys and press “Set Clock”

key to set the minute time. Now the clock time is set as shown in

Fig. 11.

Note: The clock time to be set before setting the Auto On & Auto

Off time.

4. Temperature setting

Press ““ (Increase), ““ (Decrease) keys to adjust the Set

Temperature. Set temperature increases or decreases by 1°C for

each press from 25°C to 75°C. Wait for few seconds the value

flashes for 5 times and the new temperature value is stored. The

set temperature scrolls on pressing the keys continuously for 3

sec. The LED display glow as shown in Fig. 12.

Note: The water is heated to the new stored temperature until

the temperature setting is changed.

5. Auto On

Press “Auto On” key, the hour time (first two digits) starts

blinking. Adjust the hour time by pressing ““ or ““ keys and

press “Auto On” key to set the hour time and minutes time (last

two digits) starts blinking. Adjust the Minute time by pressing

““ or ““ keys and press “Auto On” key to set the minute

time. Now the clock time is set as shown in Fig. 13.

Note: By default the “Auto On” time is 00:00 and if new time is

set the heating element will be switched on from the new “Auto

On” time irrespective of the water heater is switched on.

Fig. 9

Fig. 10

Fig. 12

Fig. 11

Fig. 13

6. Auto Off

Press “Auto Off” key, the hour time (first two digits) starts blinking.

Adjust the hour time by pressing ““ or ““ keys and press “Auto

Off” key to set the hour time and minutes time (last two digits)

starts blinking. Adjust the Minute time by pressing ““ or ““

keys and press “Auto Off” key to set the minute time. Now the

clock time is set as shown in Fig. 14 .

Note: By default the “Auto Off” time is 23:59 and if new time is

set the heating element will be switched on till the new “Auto Off”

time irrespective of the water heater is switched on.

7. Energy meter

The “ENERGY METER” key is used to display the energy

consumption of water heater in kWh. The energy meter value is

displayed for 5 sec and it is cumulative. The digital display as

shown in Fig. 15.

Note:

• Energy Meter values are indicative only.

• Refer 6. Reset function to reset the Energy Meter.

8. Power select

The water in the tank heats quick by changing the power options. The default power

selection is 2000W. It can be changed to 1000, 2000 or 3000W by pressing the power

select key. Wait for few seconds the value flashes for 5 times and the new power option is

stored. The LED display as shown in Fig. 16.

9. Override

By pressing the ”Override” key, the water heater enters the heating state instantly after the

“Auto Off” time. The heating continues until the set temperature is reached. You can exit

the heating mode by pressing the “Override” button again during the instant heating

mode. The LED display as shown in Fig. 9.

10. Reset

By pressing the ““ and ““ simultaneously for few seconds the water heater will change

into default stage. AUTO ON & OFF times set as 00:00 & 23:59. Power is set 2000W as

default. Set temperature set to 70°C.

11. Operation of remote controller

The operating method and function keys of the remote controller as shown in Fig. 7.

1. Prior to operating the remote controller, it is necessary to install the battery as show in

Fig. 17.

2. While the remote controller in use, point it at the electronic controller, having a range

within 5 m as shown in Fig. 18.

Note:

• Replace the batteries if the controller does not function correctly.

• Use two AAA/1.5V cells. Ensure to insert them in the correct orientation.

• When replacing the batteries, do not mix old and new or batteries of a different type.

• If the remote is not used for a long period, please remove the batteries.

Fig. 15

Fig. 16

Fig. 14

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere A.O. Smith Boiler Handbücher

A.O. Smith

A.O. Smith BTI 100 G Leitfaden

A.O. Smith

A.O. Smith DURA-Power DRE-52 Anleitung zur Verwendung

A.O. Smith

A.O. Smith DURA-Power DRE-52 Bedienungsanleitung

A.O. Smith

A.O. Smith SBD 30 150 Bedienungsanleitung

A.O. Smith

A.O. Smith BT180-100 Bedienungsanleitung

A.O. Smith

A.O. Smith LB-500 Bedienungsanleitung

A.O. Smith

A.O. Smith ENL-40-240V-45 Produktinformationsblatt

A.O. Smith

A.O. Smith ATI-305-N Bedienungsanleitung

A.O. Smith

A.O. Smith 200 Series Bedienungsanleitung

A.O. Smith

A.O. Smith HSE-VAS015 Bedienungsanleitung

A.O. Smith

A.O. Smith GPVH 40 Leitfaden

A.O. Smith

A.O. Smith Conservationist BTP-139/A Bedienungsanleitung

A.O. Smith

A.O. Smith GPHE 50 Series Bedienungsanleitung

A.O. Smith

A.O. Smith GCV300 Anleitung zur Verwendung

A.O. Smith

A.O. Smith MEV 50 EC Bedienungsanleitung

A.O. Smith

A.O. Smith ADM - 40 Fehlerbehebungshandbuch

A.O. Smith

A.O. Smith DURA-Power DVE-120 Bedienungsanleitung

A.O. Smith

A.O. Smith 185363-001 Bedienungsanleitung

A.O. Smith

A.O. Smith ***81-140 Installations- und Benutzerhandbuch

A.O. Smith

A.O. Smith ATI-305-N Bedienungsanleitung

A.O. Smith

A.O. Smith HSE-VAS-X Bedienungsanleitung

A.O. Smith

A.O. Smith 200 Series Bedienungsanleitung

A.O. Smith

A.O. Smith CYCLONE Xi BTH 500A Bedienungsanleitung

A.O. Smith

A.O. Smith BTF-80 Bedienungsanleitung

Beliebte Boiler Handbücher anderer Marken

Kenmore

Kenmore 153.582400 Bedienungsanleitung

STIEBEL ELTRON

STIEBEL ELTRON Eltronom SHU 5 S Bedienungsanleitung

clage

clage E-Mini Series Bedienungsanleitung

Toyotomi

Toyotomi Oil Miser OM-180 Bedienungsanleitung

Bradford White

Bradford White EF Series Bedienungsanleitung

Eccotemp

Eccotemp 40-H Bedienungsanleitung

Dimplex

Dimplex ECSd125-580 Leitfaden

Dux

Dux 32FCR6N Bedienungsanleitung

Noritz

Noritz N-132M Gebrauchsanweisung

TESY

TESY GCV7/4S 10047 Technisches Datenblatt

Toyotomi

Toyotomi Oil Miser OM-148 (Type D) Fehlerbehebungshandbuch

Koryo

Koryo KWHZF15Y Bedienungsanleitung

Pentair

Pentair PSC-14-4-02 Bedienungsanleitung

GE 40M06AAG Montageanleitung

Thermor

Thermor AEROMAX SPLIT 2 Bedienungsanleitung

American Hometec

American Hometec AHQ-B03X Bedienungsanleitung

PVI

PVI MAXIM Bedienungsanleitung

Sunerg Solar Energy

Sunerg Solar Energy Calor Top 200D Betriebsanleitung