A.O. Smith Master-Fit BTR-151 through BTR-201 Bedienungsanleitung

Commercial Gas Water Heaters

ACGSS00705

June2007R

The Master-Fit® BTR-151 and BTR-201 are designed for installation in “booster”

applications, to supply commercial dishwashers with very high temperature water…

usually 180ºF. A booster water heater is normally used in conjunction with a

standard water heater water delivering hot water at a lower temperature to meet

the non-dishwashing needs of a restaurant or other foodservice application.

With a 32-gallon storage tank, these compact units measure only 45'' high,

and hot and cold water connections can be made in the top, front or rear,

for installation versatility.

THE ELIMINATOR™SELF-CLEANING SYSTEM

• Designed to signiﬁcantly reduce or eliminate buildup of lime, sand and

other sediment inside the tank

• Reduced sediment buildup helps Master-Fit water heaters maintain their

rated energy-efﬁciency and reduce water heating costs

• Self-cleaning system also helps prolong tank life

BUILT-IN INDUCED DRAFT BLOWER

• Produces power-induced draft of makeup air prior to burner ignition

• Provides more efﬁcient control of heat through the ﬂue collector

• No draft hood or barometric damper required

RATED AS CATEGORY 1 APPLIANCE

• Can be commonly vented with other Category 1 appliances, using standard

metal type “B” vent

PERMAGLAS®ULTRA COAT GLASS LINING

• Exclusive process provides superior protection against corrosion

• CoreGard anode rods with stainless steel core provide additional

corrosion protection

THREE WATER CONNECTION OPTIONS

• Hot and cold water connections can be made through top, front or rear of water heater

• The Eliminator self-cleaning device operates when cold water is connected

through front

INTERMITTENT ELECTRONIC IGNITION

• Eliminates standing pilot

• Includes power ON/OFF switch

• Provides ﬂame failure response in less than one second

FACTORY-INSTALLED TEMPERATURE & PRESSURE RELIEF VALVE

MAXIMUM HYDROSTATIC WORKING PRESSURE 160 PSI

80% THERMAL EFFICIENCY

CODES AND STANDARDS

• Design-certiﬁed by UL (Underwriters Laboratories), according to

ANSZ21.10.3-CSA4.3 standards governing storage-type water heaters

• Meets ASHRAE/IESNA 90.1-1999

• Optional ASME construction available

WARRANTY

• Three-year limited warranty against tank leaks

• For complete warranty information, consult written warranty shipped

with water heater, or contact A.O. Smith Water Products Company

BTR-151

through

BTR-201

BOOSTER MODELS

MODEL

NUMBER A B C D E F G H

GAS

CONN.

WATER

CONN.

APPROX.

SHIPPING

WEIGHT

(LBS.)

BTR-151

and

BTR-201

inches 45 40 27-3/4 32-1/4 15-3/4 56-1/2 63/4 1-1/2 460

cm 114.3 101.6 70.5 81.9 40 12.7 16.5 15.2 - - 181.8

1 1/2" NPI

OUTLET

1 1/2" NPI

INLET CLEARANCE

1" NPI RELIEF

VALVE OPENING

15.2cm

1.5

3.8cm

Commercial Gas Water Heaters

BOOSTER MODELS

SUGGESTED SPECIFICATION

Gas booster water heater(s) shall be A.O. Smith Master-Fit, Model Number ___________________ , with a 32-gallon storage

capacity, an input rate of __________________ BTU/HR, _________________ gas, and a recovery rate of ________ gallons

per hour at a ________ degree Fahrenheit temperature rise, and a maximum hydrostatic working pressure of 160 psi.

Unit(s) shall have a fan-assisted combustion system, providing a power-induced draft of makeup air prior to burner ignition.

Unit(s) shall be equipped with intermittent electronic ignition with power on/off switch, which shall provide ﬂame failure

response in less than one second. The burner for the unit(s) shall be easily removable. Unit(s) shall be equipped with a

factory-installed temperature and pressure relief valve, and a 2-3/4'' x 3-3/4'' tank inspection port.

The water heater tank shall be glasslined and protected against premature failure in the following ways:

1. Against electrolytic corrosion by multiple, factory-installed anode rods

2. Against failure due to overheating caused by the buildup of scale, ﬁlm and other sediment by a self-cleaning device,

positioned inside the tank so that it directs the ﬂow of inlet water in such a way that microscopic particles of precipitated

solids shall be kept in suspension and exhausted from the water heater on that or successive hot water draws.

Unit(s) shall meet or exceed ASHRAE/IESNA 90.1-1999, and be design certiﬁed by UL (Underwriters Laboratories), according

to ANSZ21.10.3-CSA4.3 standards governing storage-type water heaters.

MODEL

NUMBER

BTU

INPUT

PER

HOUR

Gallons

Litres

TANK

SIZE

FIRST

HOUR

RATING

GPH

LPH 40°F

22°C

60°F

33°C

80°F

44°C

100°F

56°C

140°F

78°C

BTR-151 150,000

U.S.Gallons

32 167 GPH 364 242 182 145 104

Litres 121.1 632.1 LPH

1377.7

916 688.9 548.8 393.6

BTR-201 199,000

U.S.Gallons

32 216 GPH 485 322 241 194 139

Litres 121.1 817.6 LPH

1835.7 1218.8

912.2 734.3 526.1

RECOVERY – GALLONS or LITRES

PER HOUR AT DEGREE RISE

DIMENSIONS AND WEIGHT

CAPACITY, INPUT AND OUTPUT

DIMENSIONS

500 Tennesse Waltz Parkway, Ashland City, TN 37015

For Technical Information and Automated Fax Service, call 800-527-1953.

A.O. Smith reserves the right to make product changes or improvements without prior notice.

Printed in U.S.A. ACGSS00705

www.hotwater.com

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere A.O. Smith Boiler Handbücher

A.O. Smith

A.O. Smith 0 Bedienungsanleitung

A.O. Smith

A.O. Smith 400A Anwendungshandbuch

A.O. Smith

A.O. Smith 201 Series Bedienungsanleitung

A.O. Smith

A.O. Smith XWH 150 Anleitung zur Verwendung

A.O. Smith

A.O. Smith EWS-10 Bedienungsanleitung

A.O. Smith

A.O. Smith DSE-5 Anleitung zur Verwendung

A.O. Smith

A.O. Smith BTR 120 Betriebsanleitung

A.O. Smith

A.O. Smith 400 - 2100 Bedienungsanleitung

A.O. Smith

A.O. Smith BTR 151 THRU 201/A Bedienungsanleitung

A.O. Smith

A.O. Smith CYCLONE XHE BTH 300A Bedienungsanleitung

A.O. Smith

A.O. Smith 197835-001 Bedienungsanleitung

A.O. Smith

A.O. Smith GDV Bedienungsanleitung

A.O. Smith

A.O. Smith DSE-120-24 Bedienungsanleitung

A.O. Smith

A.O. Smith HSE-VAS-X Bedienungsanleitung

A.O. Smith

A.O. Smith BTI 120 Bedienungsanleitung

A.O. Smith

A.O. Smith DVE-150, DHE-200 Bedienungsanleitung

A.O. Smith

A.O. Smith GPDH Bedienungsanleitung

A.O. Smith

A.O. Smith ACVT-50 100 Bedienungsanleitung

A.O. Smith

A.O. Smith 104 Series Anwendungshandbuch

A.O. Smith

A.O. Smith HSE-SHS Bedienungsanleitung

A.O. Smith

A.O. Smith BTF-80 Bedienungsanleitung

A.O. Smith

A.O. Smith BTN 120 THRU 400/A Series Bedienungsanleitung

A.O. Smith

A.O. Smith 185762-000 Bedienungsanleitung

A.O. Smith

A.O. Smith T-M50 ASME Bedienungsanleitung

Beliebte Boiler Handbücher anderer Marken

Kenmore

Kenmore 153.582400 Bedienungsanleitung

STIEBEL ELTRON

STIEBEL ELTRON Eltronom SHU 5 S Bedienungsanleitung

clage

clage E-Mini Series Bedienungsanleitung

Toyotomi

Toyotomi Oil Miser OM-180 Bedienungsanleitung

Bradford White

Bradford White EF Series Bedienungsanleitung

Eccotemp

Eccotemp 40-H Bedienungsanleitung

Dimplex

Dimplex ECSd125-580 Leitfaden

Dux

Dux 32FCR6N Bedienungsanleitung

Noritz

Noritz N-132M Gebrauchsanweisung

TESY

TESY GCV7/4S 10047 Technisches Datenblatt

Toyotomi

Toyotomi Oil Miser OM-148 (Type D) Fehlerbehebungshandbuch

Koryo

Koryo KWHZF15Y Bedienungsanleitung

Pentair

Pentair PSC-14-4-02 Bedienungsanleitung

GE 40M06AAG Montageanleitung

Thermor

Thermor AEROMAX SPLIT 2 Bedienungsanleitung

American Hometec

American Hometec AHQ-B03X Bedienungsanleitung

PVI

PVI MAXIM Bedienungsanleitung

Sunerg Solar Energy

Sunerg Solar Energy Calor Top 200D Betriebsanleitung