A.O. Smith TJH Bedienungsanleitung

Page 1 of 4

Revised January 2011

AOSTT35200

Storage Tanks

CUSTOM-LINE FACTORY JACKETED AND

INSULATED STORAGE TANKS

Large volume tanks are designed for storing potable water. Fitting locations

of these custom-line tanks match the needs of normal installations plus those

for the A. O. Smith Cer-Temp®

80 and Shure-Temp™systems.

FEATURES

STANDARD SIZES FROM 140 TO 1,000 GALLONS A. O. Smith stocks vertical

factory jacketed and insulated tanks from 140 gallons up to 1,000 gallons for

fast delivery and retroﬁt applications. All stock tanks are glasslined with

standard tank openings as shown on following pages. For custom or larger

capacities, see our custom line tanks or consult your factory representatives.

ASME CODE CONSTRUCTION - All tanks are constructed to the requirements of

the ASME. ASME code tanks are available in 100, 125, 150 and 160 psi working pressures

(125 psi working pressure - standard)

. Consult factory for ASME

code tanks with greater

or lesser working pressures, with special conﬁgurations or materials.

INSULATION - Entire tank is surrounded with high density ﬁber

glass insulation to reduce costly heat loss; non-sagging and

vermin-proof. To meet ASHRAE 90.1 (current edition) depth of

insulation cavity requires use of remote bulb-type tank

temperature control and thermometer. Storage tanks meet

R12.5 minimum thermal insulation requirements of the

U.S. Department of Energy and current edition of

ASHRAE/IESNA 90.1.

CABINET

-Heavy gauge steel with high quality powder coat paint

provides additional insulating qualities for greater energy savings.

LININGS AND COATINGS - Each lining and coating has

particular capabilities and limitations. Please consult the

factory for recommendations on the uses of linings for speciﬁc applications.

Thorough investigation on the service life of steel tanks with protective coatings

or linings has led to the recommendations of the following linings:

QGlasslined (Standard) - These are normally stocked tanks for water storage up to 180 F,

with glass lining to prevent corrosion and addition of rust to water. The glass lining was

developed over many years of ceramic research for a wide variety of conditions.

QCement - A special formulation of cement provides excellent corrosion protection. Available

on 200 gallon and larger sizes. A manhole or handhole is included for application of cement lining.

Epoxy - The application of specially formulated epoxy makes this lining suitable for cold or hot

water storage. A manhole or handhole is included for application of epoxy lining. Available on 200

gallon and larger sizes.

CATHODIC PROTECTION - Glasslined, cement and epoxy tanks are furnished with

anodes designed for maximum protection.

ACCESSORIES - Tanks will be supplied with the ﬁttings located

as indicated on the drawings unless speciﬁed otherwise. A

manhole or handhole is included on cement or epoxy tanks.

A manhole or handhole is optional on glasslined tanks.

OPTIONAL

MODELS

TJV

AND TJH

CRN

$26777-97-+6SHF6KHHWLQGG 30

Page 2 of 4

www.hotwater.com

AOSTT35200

Storage Tanks

STORAGE TANK SELECTION

TJV-140 THRU TJV-1000

FIGURE 1.

NOTE: Inspection openings, i.e., handholes and manholes, are optional and are to be included with glasslined tanks

only when speciﬁed. Tanks so equipped are f.o.b. Seattle.

Other tanks to 66” diameter and 3500 gallon are available on special order.

All openings Female Pipe Thread except as noted.

“F” opening Male Pipe Thread.

MODEL AND

GALLON

CAPACITY A B C D E F G H

TJV-140 87 30 21 1/2 51 8 1 1/2 2 1/2 6 3/8

TJV-200 83 36 22 45 10 1 1/2 2 1/2 7 3/4

TJV-250 96 36 22 58 10 1 1/2 2 1/2 7 3/4

TJV-350 97 42 24 1/2 54 14 1 1/2 2 1/2 9 1/2

TJV-400 105 42 24 1/2 61 14 1 1/2 2 1/2 9 1/2

TJVT-500 100 48 27 52 16 1 1/2 3 11 5/16

TJV-500 84 54 27 3/4 33 1/4 18 1 1/2 3 12 3/4

TJV-750 116 54 27 3/4 65 1/2 18 1 1/2 3 12 3/4

TJV-1000 150 54 27 3/4 97 1/2 18 1 1/2 3 12 3/4

$26777-97-+6SHF6KHHWLQGG 30

Page 3 of 4

www.hotwater.com

AOSTT35200

Storage Tanks

STORAGE TANK SELECTION

TJH-200 THRU TJH-1000

FIGURE 2.

NOTE: Inspection openings, i.e., handholes and manholes, are optional and are to be included with glasslined tanks

only when speciﬁed. Tanks so equipped are f.o.b. Seattle.

Other tanks to 66” diameter and 3500 gallon are available on special order.

All openings Female Pipe Thread except as noted.

MODEL AND

GALLON

CAPACITY A B C D E F G H

TJH-200 41 36 77 16 2 1/2 11 23 16

TJH-250 41 36 90 16 2 1/2 11 23 22-1/2

TJH-350 47 42 93 17 1/2 2 1/2 10 26 22 1/2

TJH-400 47 42 99 17 1/2 2 1/2 10 26 26

TJHT-500 53 48 94 21 3 11 29 19 1/2

TJH-500 59 54 79 22 3/4 3 12 32 11

TJH-750 59 54 111 22 3/4 3 12 32 27

TJH-1000 59 54 143 22 3/4 3 11 32 43

OPTIONAL

Handle or 11” x 16” manholes

Additional openings

$26777-97-+6SHF6KHHWLQGG 30

SUGGESTED SPECIFICATION

SAMPLE SPECIFICATION FOR CUSTOM-LINE STORAGE TANKS

When jacketed or insulated these models meet R12.5 minimum thermal insulation requirements of the U.S. Department of Energy and current edition of

ASHRAE/IESNA 90.1.

ASME storage tank to be A. O. Smith Custom-Line model ______________. Capacity to be ___________gallons with a diameter of _______ inches. Tank(s) shall be constructed and

stamped according to ASME speciﬁcations for __________ psi working pressure. Manhole (11 x 15), handhole (4x6) or inspection openings (2-2˝) shall be installed in accordance with

ASME code requirements and manufacturer(s) standard practice. Tank to be constructed of (carbon steel) _________. Lining shall be (glass, epoxy, cement) ______________. Tank(s) lined

with (glass, cement, epoxy) _____________lining shall be equipped with the number and size of magnesium anode rod(s) sufﬁcient to provide adequate protection for the tank lining.

Tank shall be (vertical, horizontal) _______________ design and provided with (four) ___________ (angle iron legs, threaded leg socket(s)) _____________ ring base, ___________ saddles.

SAMPLE SPECIFICATION FOR TANK HEATERS

Tank heaters shall be Model No. ____________ 3/4˝ OD 20 gauge copper “U” tubes. Heater to have ________ square feet of heating surface to heat ____________ gallons per hour from

_____________ degrees F to ____________ degrees F with heating media of ____________psi steam (or _________ degrees F boiler water). The element shall be constructed so that the

entire section can be removed from the tank for cleaning and inspection.

For Technical Information and Automated Fax Service, call 800-527-1953. A.O. Smith Corporation reserves the right to make product changes or improvements without prior notice.

Storage Tanks

Revised January 2011

Page 4 of 4

www.hotwater.com

AOSTT35200

LIMITED WARRANTY OUTLINES

GLASSLINED, CEMENT, EPOXY: If the tank should leak anytime

during the ﬁrst ﬁve years, under the terms of the warranty,

A. O. Smith will repair or replace the tank; installation,

labor and handling extra.

BLACK STEEL: If the tank should leak on installation, under the

terms of the warranty, A. O. Smith will repair or replace the tank;

installation, labor and handling extra.

NOTE: THIS OUTLINE IS NOT A WARRANTY. For complete

information, consult the written warranty or A. O. Smith Water

Products Company. Warranty does not apply to product installed

outside of the United States of America or its territorial

possessions and Canada.

$26777-97-+6SHF6KHHWLQGG 30

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere A.O. Smith Boiler Handbücher

A.O. Smith

A.O. Smith TWI 35-200 Fehlerbehebungshandbuch

A.O. Smith

A.O. Smith GDHE-50 Bedienungsanleitung

A.O. Smith

A.O. Smith 12 40GPC T 100 Anleitung zur Verwendung

A.O. Smith

A.O. Smith T-H3M-DV Bedienungsanleitung

A.O. Smith

A.O. Smith 184769-000 Bedienungsanleitung

A.O. Smith

A.O. Smith T-D2-OS Bedienungsanleitung

A.O. Smith

A.O. Smith ENL-40-240V-45 Produktinformationsblatt

A.O. Smith

A.O. Smith BTX-80 Bedienungsanleitung

A.O. Smith

A.O. Smith GDV Bedienungsanleitung

A.O. Smith

A.O. Smith BTH 120-250(A) Handbuch

A.O. Smith

A.O. Smith FVIR Produktinformationsblatt

A.O. Smith

A.O. Smith Residential Gas Water Heaters Bedienungsanleitung

A.O. Smith

A.O. Smith T-H2S-DV Bedienungsanleitung

A.O. Smith

A.O. Smith 201 Series Bedienungsanleitung

A.O. Smith

A.O. Smith ADMR - 115 Bedienungsanleitung

A.O. Smith

A.O. Smith 305 Bedienungsanleitung

A.O. Smith

A.O. Smith 104 Series Anwendungshandbuch

A.O. Smith

A.O. Smith GCV Series Anleitung zur Verwendung

A.O. Smith

A.O. Smith GPCR Bedienungsanleitung

A.O. Smith

A.O. Smith Water Heater 520 Direct Vent Indoor Bedienungsanleitung

A.O. Smith

A.O. Smith BTI - 65 Leitfaden

A.O. Smith

A.O. Smith 505 Bedienungsanleitung

A.O. Smith

A.O. Smith W/HOT Bedienungsanleitung

A.O. Smith

A.O. Smith Power Direct ventedGasModels Bedienungsanleitung

Beliebte Boiler Handbücher anderer Marken

Kenmore

Kenmore 153.582400 Bedienungsanleitung

STIEBEL ELTRON

STIEBEL ELTRON Eltronom SHU 5 S Bedienungsanleitung

clage

clage E-Mini Series Bedienungsanleitung

Toyotomi

Toyotomi Oil Miser OM-180 Bedienungsanleitung

Bradford White

Bradford White EF Series Bedienungsanleitung

Eccotemp

Eccotemp 40-H Bedienungsanleitung

Dimplex

Dimplex ECSd125-580 Leitfaden

Dux

Dux 32FCR6N Bedienungsanleitung

Noritz

Noritz N-132M Gebrauchsanweisung

TESY

TESY GCV7/4S 10047 Technisches Datenblatt

Toyotomi

Toyotomi Oil Miser OM-148 (Type D) Fehlerbehebungshandbuch

Koryo

Koryo KWHZF15Y Bedienungsanleitung

Pentair

Pentair PSC-14-4-02 Bedienungsanleitung

GE 40M06AAG Montageanleitung

Thermor

Thermor AEROMAX SPLIT 2 Bedienungsanleitung

American Hometec

American Hometec AHQ-B03X Bedienungsanleitung

PVI

PVI MAXIM Bedienungsanleitung

Sunerg Solar Energy

Sunerg Solar Energy Calor Top 200D Betriebsanleitung