Aaeon AMB-2003 Series Bedienungsanleitung

AMB-2003 Series

Modular System Industrial Panel PCs

Version 2.2for SBC-658

Industrial Panel PCs

Industrial Panel PCs for Industrial Automation

User’s Manual

Safety & Warranty

1. Read these safety instructions carefully.

2. Keep this user's manual for later reference.

3. Disconnect this equipment from any AC outlet before cleaning. Do not use

liquid or spray detergents for cleaning. Use a damp cloth.

4. For pluggable equipment, the power outlet must be installed near the

equipment and must be easily accessible.

5. Keep this equipment away from humidity.

6. Put this equipment on a reliable surface during installation. Dropping it or

letting it fall could cause damage.

7. The openings on the enclosure are for air convection. Protect the equipment

from overheating. DO NOT COVER THE OPENINGS.

8. Make sure the voltage of the power source is correct before connecting the

equipment to the power outlet.

9. Position the power cord so that people cannot step on it. Do not place

anything over the power cord.

10. All cautions and warnings on the equipment should be noted.

11. If the equipment is not used for a long time, disconnect it from the power

source to avoid damage by transient over-voltage.

12. Never pour any liquid into an opening. This could cause fire or electrical

shock.

13. Never open the equipment. For safety reasons, only qualified service

personnel should open the equipment.

14. If any of the following situations arises, get the equipment checked by

service personnel:

a. The power cord or plug is damaged.

b. Liquid has penetrated into the equipment.

c. The equipment has been exposed to moisture.

d. The equipment does not work well, or you cannot get it to work

according to the users manual.

e. The equipment has been dropped and damaged.

f. The equipment has obvious signs of breakage.

15. DO NOT LEAVE THIS EQUIPMENT IN AN UNCONTROLLED

ENVIRONMENT WHERE THE STORAGE TEMPERATURE IS

BELOW -20° C (-4°F) OR ABOVE 60° C (140° F). IT MAY DAMAGE

THE EQUIPMENT.

Caution:

Dangerofexplosionifbattery is incorrectlyreplaced.Replace only withthesame or equivalenttype

recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s

instructions.

FCC Safety

This device complies with Part 15 FCC Rules. Operation is subject to the

following two conditions: (1) this device may not

cause harmful interference, and (2) this device must

accept any interference received including

interference that may cause undesired operation.

Contents

Chapter1 General Information.........................................5

1.1 Introduction.................................................... 6

1.2 Specifications ..................................................7

General ................................................................................7

Environmental......................................................................7

Power Supply Selection Table.............................................7

Features ...............................................................................8

Specifications ......................................................................9

1.3 Touchscreen (Optional)..................................9

1.4 LCD Specifications....................................... 10

1.5 Dimensions.................................................... 11

1.6 Panel Mounting............................................. 12

1.7 Packing List .................................................. 13

Chapter2 Installation.......................................................14

Chapter3Award BIOS Setup..........................................51

Chapter1 General Information

1.1 Introduction.....................................................6

1.2 Specifications...................................................7

1.3 Touchscreen (Optional) ..................................9

1.4 LCD Specifications........................................10

1.5 Dimensions.....................................................11

1.6 Panel Mounting.............................................12

1.7 Packing List...................................................13

1.1 Introduction

The AMB-2003 series modular system panel PCs, is the PC-base

industrial computer thatspecially designed to keep normal operation under

harsh environment, which meet the entire requirement as an industrial man

machine interface (MMI).

They provide a complete hard ware application and construct a high

quality plastic front panel which meets the toughest industrial and

environmental protection standards

It is afull-function PC-base system with a 10.4” VGA (640 x 480) color

TFT hi-brightness, long-life time LCD display, and compact with different

control modules via a 50-pin cable. The compact dimensions are ideal for

automation applications when the installation space is critical.

These PCs are characterized by their space saving, there are two free slots

for PCI/ ISA. AMB-2003 is heavy-duty steel chassis with a sealed plastic

front panel meets the toughest industrial and environmental standards. All

the controls and connectors are placed on the rear panel; you can connect

the panel PCs to other devices via them.

1.2 Specifications

General

nConstruction:Heavy-duty aluminum chassis & plastic or

aluminum front panel

nDisk drive housing:

a 3.5" HDD ora 2.5”HDD, Slim CD-ROM

& Slim FDD.

nDimensions(AMB-2003): 330(W) x 252(H) x 128mm(D)

nGross Weight: 9.6Kg

Environmental

nOperating temperature:0° to 50°

nStorage temperature: -20° to 60°

nRelative humidity: 5 to 95%, non-condensing

nAltitude: 10,000 ft. (3000 meters)

nVibration:

5 to 17Hz, 0.1" double-amplitude displacement

17 to 500 Hz, 1.5G peak to peak

nShock: 10G-peak acceleration (11-msec. duration)

nEMI: FCC/CE Class A

Power Supply Selection Table

Mode Input voltage

Universal/70W 85-270VAC

24VDC/70W 10-30VDC

Features

AMB-2003 (10.4”LCD + ACS-2303 Control Box)

n10.4” VGA color TFT LCD display

nPlastic front panel and heavy-duty steel chassis

nSupports Socket 370 CPU up to Pentium III

850MHz

nDisk Drive Space for CD-ROM, FDD and HDD

nSupports DiskOnChip and DiskOnModule

nTwo free expansion slotsfor ISA or PCI

nResistive touchscreen (optional)

nRotatable mounting mechanism (optional)

***Expansion IDE port will not functional when both HDD & CD-ROM

install in the machine

Specifications

AMB-2003 (10.4”LCD + ACS2303 Control Box)

nConstruction: Heavy-duty steel chassis &

plastic front panel.

nCPU: Up to Intel Celeron/ P III 850MHz

nMemory: Supports up to 128MB

nDisplay: 10.4”VGA (640 x 480) TFT color LCD

nLCD/CRT controller:

NS Cx5530 Chipset

UMA supports up to 2.5MB display memory

nNetwork (LAN):

Intel 8139B 10/100 Base-T Ethernet controller

nI/O ports:

COM1: RS-232

COM2: RS-232 or RS-422/485(jumper select)

1 parallel port (support ECP/EPP)

1 PS/2 keyboard interface

1 PS/2 mouse interface

nDisk Drive Housing:

3.5”HDD or

2.5”HDD and Slim FDD or

2.5”HDD and Slim CD-ROM

nUSB connector: Dual USB ports

nMounting: Panel mount, Handle mount

nPower supply: Universal 70W switching power

supply

nOS support: MS DOS, Windows 98/SE,

Windows NT4.0, Windows 2000.

1.3 Touchscreen (Optional)

lType: 8-wire, analog resistive

lResolution: 1024 x 1024

lLight transmission: 76%±2

lController: RS-232 interface

1.4 LCD Specifications

Model AMB-2003

Display type TFT color LCD

Size (diagonal) 10.4”

Number of Pixels 640(W) x 480(H)

Dot size

(mm x mm) 0.33(W) x 0.33

View angle (Horizontal) 80°

View angle (Vertical)45°

Luminance (cd/m2)250 (TYP)

Operating Temperature 0 ~ 45 °C

Backlight Life-time (Hrs) 30,000

Inhaltsverzeichnis

Andere Aaeon Touchscreen Handbücher

Aaeon

Aaeon ACD-515R Bedienungsanleitung

Aaeon

Aaeon POP-190 Bedienungsanleitung

Aaeon

Aaeon AGD-312D Bedienungsanleitung

Aaeon

Aaeon Onyx-151 Bedienungsanleitung

Aaeon

Aaeon ACP-1104 Bedienungsanleitung

Aaeon

Aaeon AOP-9120 Bedienungsanleitung

Aaeon

Aaeon AOP-9150 Bedienungsanleitung

Aaeon

Aaeon AOP-8060 Bedienungsanleitung

Aaeon

Aaeon FOX-150 Bedienungsanleitung

Aaeon

Aaeon AHP-2153 Bedienungsanleitung

Aaeon

Aaeon OMNI-3155-UP Bedienungsanleitung

Aaeon

Aaeon APC-8122 Series Bedienungsanleitung

Aaeon

Aaeon ACD-110D Bedienungsanleitung

Aaeon

Aaeon AHP-1083 Bedienungsanleitung

Aaeon

Aaeon AMB-551-D Bedienungsanleitung

Aaeon

Aaeon ACP-5215 Bedienungsanleitung

Aaeon

Aaeon AHP-1123 Bedienungsanleitung

Aaeon

Aaeon ACP-1074 Bedienungsanleitung

Aaeon

Aaeon PFM-541I Bedienungsanleitung

Aaeon

Aaeon OMNI-2155 Bedienungsanleitung

Aaeon

Aaeon FOX-151 Bedienungsanleitung

Aaeon

Aaeon ACP-1103 Bedienungsanleitung

Aaeon

Aaeon AHP-1122 Bedienungsanleitung

Aaeon

Aaeon APC-8122 Series Bedienungsanleitung

Beliebte Touchscreen Handbücher anderer Marken

FlowLine

FlowLine Data loop Bedienungsanleitung

ALPEX

ALPEX AEx-8 P Series Bedienungsanleitung

Ltech

Ltech E5S Bedienungsanleitung

Harman

Harman AMX MODERO S MSD-701-L2 Bedienungsanleitung

Acnodes

Acnodes PC 1150 Bedienungsanleitung

AIS

AIS IP10IA99 series Bedienungsanleitung

IBASE Technology

IBASE Technology ASTUT-152-RE1S Bedienungsanleitung

YASKAWA

YASKAWA TP 610C Bedienungsanleitung

B&R

B&R Power Panel C Series Bedienungsanleitung

Beijer Electronics

Beijer Electronics X2 control Bedienungsanleitung

AXIOMTEK

AXIOMTEK GOT321W-521 Bedienungsanleitung

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Bedienungsanleitung

Qomo

Qomo QIT1386 Bedienungsanleitung

DFI

DFI KS104-CD Bedienungsanleitung

AMX

AMX AXP-PPC Leitfaden

Sartorius

Sartorius X3 PR 5410 Bedienungsanleitung

AMX

AMX Modero X Series Bedienungsanleitung

Advantech

Advantech TPC-30 Series Bedienungsanleitung