A&D TM-2657P Bedienungsanleitung

TM-2657P

Automatic Blood Pressure Monitor

Instruction Manual

1WMPD4002893 1505

English

(

Original

)

No part of this publication may be reproduced, transmitted, transcribed or translated into any language

in any form by any means without the express written consent of A&D Company, Limited.

The contents of this manual and the specifications of the instruments covered by this manual are

subject to change without notice.

Windows is a registered trademark of the Microsoft Corporation.

WARNING DEFINITIONS

To prevent accidents due to inappropriate handling, this product and its manual contain the following

warning signs and marks. The meaning of these warning signs and marks are as follows.

Warning Definitions

An imminently hazardous situation which, if not avoided, will result in death

or serious injury.

Apotentially hazardous situation which, if not avoided, could result in death

or serious injury.

A potentially hazardous situation which, if not avoided, may result in minor

or moderate injury. It may also be used to alert against unsafe practice.

Symbol Examples

The symbol indicates “Caution.”

The nature of the caution required is described inside or near the symbol,

using text or a picture.

The example on the left indicates caution against electrical shock.

The symbol indicates “Do not.”

The prohibited action is described inside or near the symbol, using text or a

picture.

The example on the left indicates “Do not disassemble.”

The symbol indicates Mandatory action.

The mandatory action is described inside or near the symbol, using text or a

picture.

The example on the left indicates General mandatory action.

Other

Note Provides information useful for the user to operate the device.

Precautions for each operation are described in the instruction manual. Read the instruction

manual before using the device.

Danger

Warning

Caution

PRECAUTIONS FOR USE

In order to use the TM-2657P Automatic Blood Pressure Monitor safely and correctly, carefully read

the following precautions before using the monitor. The following content summarizes general matters

regarding the safety of patients and operators, in addition to safe handling of the monitor.

1. When installing and storing the monitor.

Keep the monitor away from areas where flammable anesthetics or flammable gases

are present, high-pressure oxygen chambers, and oxygen tents. Using the monitor in

these areas may cause an explosion.

Consider the following when using and storing the monitor. If the monitor is stored in an

environment beyond the specified temperature or humidity, it may not perform to its

capabilities.

Avoid locations where the monitor may be splashed by water.

Avoid locations with high temperature, high humidity, direct sunlight, dust, salt and

sulfur in the air.

Avoid locations where the monitor may be tilted, vibrated, or impacted (including

during transportation).

Avoid locations where chemicals are stored or gas occurs.

Installation site: A location with a temperature between +10°C and +40°C and a

humidity between 15% RH and 85% RH (no condensation).

Storage site: A location with a temperature between -20°C and +60°C and a humidity

between 10% RH and 95% RH.

Alocation with an electrical outlet that can supply sufficient power (frequency,

voltage, current) for the monitor.

Note

Please be aware that the rubber feet may discolor the top of the stand.

Danger

Caution

iii

2. Before using the monitor.

Make sure that the electrical outlet is properly grounded and supplies the specified

voltage and frequency (100-240V~ 50-60 Hz, more than 85VA).

Connect the monitor to a grounded, 3-prong outlet.

If a grounded, hospital-grade, 3-prong outlet is not available, connect the ground

wire to an outlet with a contact terminal and ground it. Using the monitor with an

incorrect outlet may cause an electrical shock.

Use the monitor safely and correctly.

Connect all cables correctly and securely.

Do not place objects on the monitor or power cable.

Ensure cuff cover is fitted before use.

Using other devices in conjunction with this monitor may cause incorrect diagnosis or

safety problems. When used, check for safety.

Always use accessories and consumables approved byA&D.

Carefully read the instruction manuals provided with optional items.

The precautions for these items are not listed in this manual.

For safe and correct use of this monitor, always perform a pre-inspection (an

inspection before use).

If the monitor is covered with condensation, allow it to dry before switching the power

on.

If the monitor has not been used for an extended period, check that the monitor

operates normally and safely before using it.

The pressure of the cuff may cause a patient’s arm to become numb.

3. When using the monitor.

Do not use a mobile phone near the monitor. It may cause a malfunction.

Do not use the monitor in a moving vehicle as this may result in inaccurate

measurements.

Always check the conditions of the monitor, its parts and the patient for safety.

If a problem is found with the monitor, its parts or the patient, stop using the monitor,

check the status of the patient and take appropriate actions.

Do not use the monitor near a strong magnetic or electric field.

Do not use the monitor on a patient using a heart-lung machine.

Warning

Caution

Warning

4.After using the monitor.

Use the specified procedure to return switches to their state before usage, and then

switch the power off.

Do not forcibly pull out the cables. Hold the connector with your hand when disconnecting

the cables.

Clean the accessories and arrange them before storage.

Keep the monitor clean and in proper operating condition so that it can be used without

problem for the next operation.

5. If you suspect there is a problem with the monitor, perform the following actions.

Ensure the safety of the patient.

Stop the operation of the monitor, switch the power off, and then disconnect the

power cable from the outlet.

In an emergency, such as when the air in the cuff is not released by pressing the

START/STOP switch, press the FAST STOP switch.

Label the monitor with a sign that says “Out of order” or “Do not use” and then

contact A&D immediately.

6. When performing a maintenance inspection.

For your safety, before performing a maintenance inspection, switch the power off

and disconnect the power cable from the outlet.

If the monitor has not been used for an extended period, check that the monitor

operates normally and safely before using it.

Always perform a pre-inspection and maintenance inspection to ensure safe and

correct operation. The organization that installs the monitor (hospital, clinic) is

responsible for use, maintenance, and management of medical electrical devices.

Neglecting pre-inspection and maintenance inspection can result in accidents.

Never disassemble or modify the monitor (medical electrical device).

When maintaining the monitor, use a dry, soft cloth. Do not use rags soaked in

volatile liquids such as thinner and benzene.

Caution

Warning

Caution

7. Be aware that strong electromagnetic waves can cause malfunctions.

This monitor complies with EMC-standard IEC60601-1-2:2007. However, to prevent

electromagnetic interference with other devices, do not use mobile phones near the

monitor.

If this monitor is located near strong electromagnetic waves, noise may enter in

waveforms and malfunctions may occur. If unexpected operations occur during use

of this monitor, check the electromagnetic environment and take appropriate actions.

The following are examples of general causes and countermeasures.

Use of mobile phones

Radio waves may cause unexpected malfunctions.

Instruct visitors to rooms or buildings with medical electrical devices not to use mobile

phones or small wireless devices.

High frequency noise is being introduced from other devices via the electrical outlet.

Check for the source of noise, and then perform countermeasures, such as using a

noise cancellation device on this line.

If the noise source is a device that can be stopped, stop using it.

Use another electrical outlet.

Effects from static electricity are suspected (discharges from devices or the

surrounding area)

Before using the monitor, ensure that the operator and patient have discharged static

electricity.

Humidify the room.

If lightning is occurring nearby, the monitor may receive excessive voltage. In such

cases, power the monitor using the following method.

Use an uninterruptible power supply.

8. Environmental considerations

Before disposing of this monitor, remove the lithium battery from the monitor.

Caution

PRECUATIONS FOR SAFETY MEASUREMENT

The following lists precautions related to measurement. Always consult with a doctor for evaluation of

the results and treatment. Self-diagnosis and self-treatment from results can be dangerous.

Do not measure on an arm receiving an intravenous drip or blood transfusion. This

may cause an accident.

If the arm cuff cover is soiled with blood, dispose of the cover. There is a risk of

spreading communicable disease.

Items that may be contaminated must be disposed of as medical waste.

Do not perform measurement if the arm has external injuries. Not only will the wound

worsen, there is a risk of communicable disease from a hygiene perspective.

Measurement cannot be performed in the following cases.

The patient who has thin or thick arms.

・ Measurement is intended for arms with circumferences of 18 to 35 cm.

The arm of the patient is wet.

・ Wet arms may cause accidents or electrical shock.

Note

Blood pressure measurement may cause subcutaneous bleeding. This subcutaneous bleeding

is temporary and disappears with time.

If thick clothing is worn, correct measurement is not possible. Measure when the patient is

wearing a sleeveless or thin shirt.

If the patient rolls up their sleeve and this pinches their arm, correct measurement is not possible.

Measurement is not possible with patients with peripheral hypoperfusion, very low blood

pressure, or low body temperature (since blood flow to the measurement location is low).

Measurement is not possible with patients with frequent arrhythmia recurrences

Measurementlocationsarerestrictedtotherightandleftupperarms.Otherlocationscannotbemeasured.

Insert the arm into the arm insertion section up to the top of the shoulder.

Ifthepatientdoesnotfeelwell,stopmeasurementimmediatelyandtakeappropriateactions.

Measurement cannot be performed with the following patients.

Patients who have just exercised

・ Blood pressure after exercise is higher than normal.

Measure after the patient has rested for several minutes and has taken deep breaths.

Patients with shaking arms

・ If the patient’s body moves, correct measurement is not possible. Wait until the shaking

stops, and then perform measurement. (This includes shaking fromthe cold or muscle

movements after moving heavy objects.)

Consult the doctor for any of the following situations.

The application of the cuff on any limb with intravascular access or therapy, or an

arterio-venous (A-V) shunt.

The application of the cuff on the arm on the side of a mastectomy.

Simultaneous use with other medical monitoring equipment on the same limb.

The blood circulation of the patient needs to be checked.

Warning

Caution

vii

UNPACKING

This monitor is a precision device and must be handled carefully. If it receives a strong

impact, it may be damaged.

Note

This monitor has been shipped in specially designed packaging to preventdamageduring shipping.

Check the monitor for damage when unpacking it.

Before using the monitor, ensure that everything is included and then check the main unit and each

standard accessory for damage.

For optional items, see “13.ACCESSORIES AND OPTIONS LIST”.

Main unit........................................................................1

Standard accessories

Power cable ........................................1

Arm cuff cover.......................................1 (One already installed on the main unit)

Printer paper .......................................1

Instruction manual (this manual) ........1

Instruction panel..................................1

Caution

viii

[Blank page]

Andere Handbücher für TM-2657P

Inhaltsverzeichnis

Andere A&D Blutdruckmessgerät Handbücher

A&D

A&D UA-767JP Bedienungsanleitung

A&D

A&D LifeSource UA-704 Bedienungsanleitung

A&D

A&D UA-789 XL Bedienungsanleitung

A&D

A&D UA-767PC Bedienungsanleitung

A&D

A&D UB-510 Bedienungsanleitung

A&D

A&D ESSENTIAL UA-651 Bedienungsanleitung

A&D

A&D UA-767PC Bedienungsanleitung

A&D

A&D UA-767PBT-C Betriebsanleitung

A&D

A&D UA-621 Bedienungsanleitung

A&D

A&D UA-651-AC Series Bedienungsanleitung

A&D

A&D UA-1010 Bedienungsanleitung

A&D

A&D AccuFit Bedienungsanleitung

A&D

A&D UA-1200CNBLE Bedienungsanleitung

A&D

A&D LIFESOURCE 1200 ULTRACONNECT Bedienungsanleitung

A&D

A&D UA-651BLE Bedienungsanleitung

A&D

A&D UA-1020 Bedienungsanleitung

A&D

A&D UA-767 Plus Bedienungsanleitung

A&D

A&D UA-621 Bedienungsanleitung

A&D

A&D UA-774 Bedienungsanleitung

A&D

A&D UA-767 plus BT-Ci Bedienungsanleitung

A&D

A&D TM-2657P Bedienungsanleitung

A&D

A&D UA-651BLE Bedienungsanleitung

A&D

A&D LifeSource UB-328 Bedienungsanleitung

A&D

A&D UA-787 Plus Bedienungsanleitung

Beliebte Blutdruckmessgerät Handbücher anderer Marken

Little Doctor

Little Doctor LD7 Bedienungsanleitung

Microlife

Microlife WatchBP Office Targe Bedienungsanleitung

Omron

Omron M6W Handbuch

Mx Onda

Mx Onda MX-CP2395 Bedienungsanleitung

Braun

Braun VitalScan 1 Bedienungsanleitung

Little Doctor

Little Doctor LD-91 Bedienungsanleitung

Sanitas

Sanitas SBM 09 Bedienungsanleitung

König Electronic

König Electronic HC-BLDPRESS200 Bedienerhandbuch

Leicke

Leicke Sharon Bedienungsanleitung

Omron

Omron M6 Comfort Bedienungsanleitung

3B SCIENTIFIC

3B SCIENTIFIC U11395 Bedienungsanleitung

Soehnle

Soehnle SYSTO MONITOR 100 Bedienungsanleitung

Nasco Healthcare

Nasco Healthcare Simulaids Life/form LF01095U Referenzhandbuch

Microlife

Microlife WatchBP office Bedienungsanleitung

HoMedics

HoMedics MiBody 360 Bedienungsanleitung

ForaCare

ForaCare FORA P30 Plus Bedienungsanleitung

JOYTECH

JOYTECH DBP-6296B Bedienungsanleitung

Omron

Omron Silver BP5250 Bedienungsanleitung