ABB AC 31 Montage- und Bedienungsanleitung

ASSEMBLY AND OPERATION MANUAL

AC31 Adapter

Supplement to the Existing Documentation

—

Table of contents

1 AC31 Adapters................................................................................................................................................. 3

1.1 Introduction................................................................................................................................................ 3

1.2 Overview of AC31 adapters (replacement devices).................................................................................. 3

1.3 System data and CS31 bus system data.................................................................................................. 4

1.3.1 System data of the AC31 adapters............................................................................................ 4

1.3.2 CS31 bus system data............................................................................................................. 10

1.4 Replacement devices: CPU.................................................................................................................... 18

1.4.1 Replacement device 07KT9x-AD............................................................................................. 19

1.5 Replacement devices: I/O modules......................................................................................................... 56

1.5.1 Replacement device 07DC91-AD............................................................................................ 57

1.5.2 Replacement device 07DC92-AD............................................................................................ 72

1.5.3 Replacement device 07AI91-AD.............................................................................................. 88

1.5.4 Replacement device 07AC91-AD.......................................................................................... 107

1.5.5 Replacement device 07AC91-AD2........................................................................................ 121

1.5.6 Replacement unit DC501-CS31-AD....................................................................................... 137

2 Index............................................................................................................................................................. 161

Table of contents

2018/09/243ADR010122, 8, en_US2

—

1 AC31 Adapters

1.1 Introduction

The modular product line of the AC31 adapter series includes modular exchange components

for control systems of the Advant Controller 31 (90 series). The simple exchange of individual

components allows existing customers to maintain their PLCs in a quick and cost-effective

manner. Extensive software modifications are not required.

Each replacement device is based on trend setting technologies of the AC500 series. There-

fore, by exchanging components it is not only possible to replace the existing device, but also to

profit from new functions and improved product quality.

During the development of the AC31 adapter series, care was taken to keep the device configu-

ration identical to the configuration of the AC31 devices. Consequently, the technical documents

for the AC31 devices are still valid and serve as reference:

●Software description (only available in English)

●System description Advant Controller 31

Only unavoidable deviations, for example due to technical limitations, are described in this

document.

CAUTION!

Installation and maintenance work on the device must be performed by a quali-

fied electrician in line with the recognized technical rules, regulations and rele-

vant standards such as EN 60204-1.

For safety instructions, please refer to

Regulations for the erection of installations.

1.2 Overview of AC31 adapters (replacement devices)

An AC31 adapter (replacement device) is available for the following AC31 devices of the 90

series (existing devices):

Existing devices: AC31

(90 series)

Replacement devices: AC31

adapters

Replacement device is based

on the following AC500

device

CPU devices:

07KT94-ARC

07KT98-ARC

07KT98-ARC-DP

07KT98-ARC-ETH

07KT98-ETH-DP

07KT94-ARC-AD *)

07KT98-ARC-AD

07KT98-ARC-DP-AD

07KT98-ARC-ETH-AD

07KT98-ETH-DP-AD

07KT98-ARC-ETH-DP-AD

PM590, DA501 and DA502

*) Customer specific product not available for current sales

Replacement

devices for

AC31

Note regarding

product docu-

mentation

AC31 Adapters

Overview of AC31 adapters (replacement devices)

2018/09/24 3ADR010122, 8, en_US 3

Existing devices: AC31

(90 series)

Replacement devices: AC31

adapters

Replacement device is based

on the following AC500

device

I/O modules:

07DC91 07DC91-AD DC532

07DC92 07DC92-AD DO524

07AC91 07AC91-AD (8-Bit) AO523

07AC91 07AC91-AD2 (12-Bit) AX522

07AI91 07AI91-AD AI523

DC501-CS31 DC501-CS31-AD DC532

1.3 System data and CS31 bus system data

The system data described in this chapter are valid for the following replacement devices:

● 07KT94-ARC-AD

● 07KT98-ARC-AD

● 07KT98-ARC-DP-AD

● 07KT98-ARC-ETH-AD

● 07KT98-ETH-DP-AD

● 07KT98-ARC-ETH-DP-AD

● 07AC91-AD

● 07AC91-AD2

● 07AI91-AD

● 07DC91-AD

● 07DC92-AD

● DC501-CS31-AD

Please also observe the CS31 bus system data

Chapter 1.3.2 “CS31 bus system data”

on page 10.

The devices of the AC31 adapter series do not have marine approval.

NOTICE!

AC31 Adapter IO modules must only be used with an ABB CPU with Master

CS31 bus (e.g. AC31 07KT9x, AC31-Adpater 07KT9x-x-x-AD or AC500 CPU).

1.3.1 System data of the AC31 adapters

1.3.1.1 Operating and environmental conditions

Table 1: Supply voltages

Voltages according to IEC 61131-2:

24 V DC Process and supply voltage 24 V DC (-15 %, +20 %

without residual ripple)

Absolute limits 19.2 V ... 30 V incl. residual

ripple

AC31 Adapters

System data and CS31 bus system data > System data of the AC31 adapters

2018/09/243ADR010122, 8, en_US4

Residual ripple £ 5 %

Polarity reversal protection 10 s (test duration), perma-

nently present on AC31

adapters

Bridging time for power interruptions according to IEC 61131-2:

DC supply Interruption < 10 ms

Time between 2 interruptions

> 1 s

CAUTION!

System damage caused by voltage!

Exceeding the maximum supply or process voltage (>30 V DC) results in per-

manent system damage (destruction).

Table 2: Operating and environmental conditions

Temperature:

-> Operation 0 °C ... +55 °C (vertical mounting position, ter-

minals upward and downward)

-> Storage -40 °C ... +75 °C

-> Transport -40 °C ... +75 °C

Humidity max. 95 %, without condensation

Air pressure:

-> Operation > 800 hPa / < 2000 m

-> Storage > 660 hPa / < 3500 m

1.3.1.2 Creepage distances and clearances

The creepage distances and clearances correspond to overvoltage category II, pollution degree

1.3.1.3 Test voltages for type test

Test voltages for type test according to IEC 61131-2:

Table 3: Impulse testing

Data Voltage Duration

24 V circuits (supply, 24 V inputs/outputs), when electri-

cally isolated from other circuitry

500 V 1.2 / 50 µs

CS31 interface from other circuitry 500 V 1.2 / 50 µs

Ethernet 500 V 1.2 / 50 µs

ARCNET 500 V 1.2 / 50 µs

COM interfaces, electrically isolated 500 V 1.2 / 50 µs

Enabling input, electrically isolated 500 V 1.2 / 50 µs

AC31 Adapters

System data and CS31 bus system data > System data of the AC31 adapters

2018/09/24 3ADR010122, 8, en_US 5

Table 4: AC voltage tests

Data Voltage Duration

24 V circuits (supply, 24 V inputs/outputs), when electri-

cally isolated from other circuitry

350 VAC 60 s

CS31 interface from other circuitry 350 VAC 60 s

Ethernet 350 VAC 60 s

ARCNET 350 VAC 60 s

COM interfaces, electrically isolated 350 VAC 60 s

Enabling input, electrically isolated 350 VAC 60 s

1.3.1.4 Power Supply Units

For the supply of devices, use power supply units according to PELV specification.

1.3.1.5 Electromagnetic compatibility

Table 5: Immunity

Data Value

Immunity against electrostatic discharge

(ESD)

According to EN 61000-4-2, zone B, criterion

-> Interference voltage with air discharge 8 kV

-> Interference voltage with contact discharge 4 kV

ESD with communication connectors Ensure that any electrostatic charge is dis-

charged prior to contact with the communica-

tion connectors (e.g. by touching an earthed

metal object). Otherwise malfunctions may

occur.

ESD module carrier connectors Do not touch the plug connecting the module

carrier on the bottom side of the device.

ESD external coupler interface Do not touch the plug to the flat ribbon cable.

Immunity against the influence of radiated

interference (CW radiated)

According to EN 61000-4-3, zone B, criterion

-> Test field strength 10 V/m (except ITU transmission bands 87…

108 MHz, 174…230 MHz and 470…790 MHz

-> 3 V/m)

-> Maximum temporary deviation during irradi-

ation

Analog current output signals max. 1.5 %.

Devices affected:

07AC91-AD, 07AC91-AD2,

07KT94-ARC-AD, 07KT98-ARC-AD,

07KT98-ARC-DP-AD, 07KT98-ARC-ETH-AD,

07KT98-ETH-DP-AD, 07KT98-ARC-ETH-DP-

Immunity against transient interference vol-

tages (burst)

According to EN 61000-4-4, zone B, criterion

-> Voltage supply 2 kV

-> Enabling input 2 kV

AC31 Adapters

System data and CS31 bus system data > System data of the AC31 adapters

2018/09/243ADR010122, 8, en_US6

Data Value

-> Digital inputs/outputs 1 kV

-> Analog inputs/outputs 1 kV

-> CS31 system bus 1 kV

-> Serial RS-232 interfaces (COM) 1 kV

-> ARCNET 1 kV

-> Ethernet 1 kV

-> I/O supply, DC out 1 kV

Immunity against the influence of power

related interference (CW radiated):

According to EN 61000-4-6, zone B, criterion

-> Test voltage Zone B, also according to 10 V

Immunity against transient interference vol-

tages with high energy (surge)

According to EN 61000-4-5, zone B, criterion

-> Voltage supply DC, enabling input 0.5 kV CM / 0.5 kV DM *)

-> I/O supply, DC out 0.5 kV CM / 0.5 kV DM *)

-> Shielded buses 1 kV CM *)

-> I/O analog, I/O DC unshielded 1 kV CM / 0.5 kV DM *)

Emitted interference (radiation): -

-> From radiated interferences According to EN 55011, group 1, class A

*) CM = Common Mode, DM = Differential Mode

The devices of the AC31 adapter series do not have marine approval.

1.3.1.6 Mechanical data

Data Value

Degree of protection IP20

Housing According to UL 94

Vibration resistance according to EN 61131-2 All three axes

2 Hz ... 15 Hz, continuous 3.5 mm

15 Hz ... 150 Hz, continuous 1 g

Vibration resistance with SD card plugged 15 Hz ... 150 Hz, continuous 1 g

Shock resistance All three axes

15 g, 11 ms, semi-sinusoidal

1.3.1.7 Earthing

The AC31 adapter devices can be earthed as follows:

AC31 Adapters

System data and CS31 bus system data > System data of the AC31 adapters

2018/09/24 3ADR010122, 8, en_US 7

Fig. 1: Earthing of devices 07AC91-AD, 07AC91-AD2, 07AI91-AD, 07DC91-AD and 07DC92-AD

AC31 Adapters

System data and CS31 bus system data > System data of the AC31 adapters

2018/09/243ADR010122, 8, en_US8

Fig. 2: Earthing of device DC501-CS31-AD

Fig. 3: CPU earthing

When earthing the replacement devices, observe the following:

● Install the AC31 adapter devices onto an earthed mounting plate to ensure a uniform refer-

ence potential of all equipment.

● Implement the connections between switchgear cabinet, mounting plate, PE rail and shield

rail with low impedance.

AC31 Adapters

System data and CS31 bus system data > System data of the AC31 adapters

2018/09/24 3ADR010122, 8, en_US 9

● Install the lines in groups (power lines, power supply lines, signal lines, data lines).

● Use lines with braided cable shield for analog signals. Earth the shield on both sides and

make sure that no compensation currents flow through the cable shield. For this purpose,

use a potential equalization line with current carrying capacity, for instance on systems con-

sisting of several switchgear cabinets.

Further information concerning CS31 bus earthing:

1.3.2 CS31 bus system data

1.3.2.1 Wiring

Table 6: Bus line

Data Value

Configuration 2 cores, twisted, with common shield

Cross section > 0.22 mm² (24 AWG)

Recommendation: 0.5 mm² corresponds to Ø

0.8 mm

Twisting rate > 10/m (symmetrically twisted)

Core insulation Polyethylene (PE)

Resistance per core < 100 Ω/km

Characteristic impedance approx. 120 Ω (100 ... 150 Ω)

Capacitance between the cores < 55 nF/km (in case of higher capacitance

values, the maximum possible bus length is

reduced)

Terminating resistors 120 Ω ¼ W at both ends

Notes Cables with PVC core insulation and core

diameter of 0.8 mm can be used up to a

length of approx. 250 m. In this case, the ter-

minating resistor is 100 Ω. Cables with PE

core insulation can be used up to a length of

approx. 500 m.

The baud rate used on the CS31 bus is 187.5 kBaud.

1.3.2.2 Bus topology

A CS31 system bus always contains only one CS31 bus master to control the bus. Up to 31

CS31 slaves can be controlled by one bus. The CS31 bus master has no address, whereas the

CS31 slaves can accept addresses in the range from 0 - 61, depending on CS31 slave type.

Possible CS31 bus masters:

● 07KT94-ARC-AD, 07KT94

● 07KT98-ARC-AD, 07KT98

● 07KT98-ARC-DP-AD

● 07KT98-ARC-ETH-AD

● 07KT98-ETH-DP-AD

● 07KT98-ARC-ETH-DP-AD

AC31 Adapters

System data and CS31 bus system data > CS31 bus system data

2018/09/243ADR010122, 8, en_US10

Andere Handbücher für AC 31

Inhaltsverzeichnis

Andere ABB Adapter Handbücher

ABB

ABB FSCA-01 Bedienungsanleitung

ABB

ABB SWISSLINE TP Benutzerhandbuch

ABB

ABB FEA-01 F Series Bedienungsanleitung

ABB

ABB RETA-02 Bedienungsanleitung

ABB

ABB Tina 10B Bedienungsanleitung

ABB

ABB SPA-ZC 402 Bedienungsanleitung

ABB

ABB FEPL-02 Ethernet POWERLINK Bedienungsanleitung

ABB

ABB FieldKey NHU200 Bedienungsanleitung

ABB

ABB REPL-01 Bedienungsanleitung

ABB

ABB Tina 7A Bedienungsanleitung

ABB

ABB FEPL-02 Ethernet POWERLINK Bedienungsanleitung

ABB

ABB FBIP-21 BACnet/IP Installationshandbuch

ABB

ABB SLTA Option Card Serial LonTalk Produkthandbuch

ABB

ABB SPA-ZC 400 Bedienungsanleitung

ABB

ABB Tina 2B Bedienungsanleitung

ABB

ABB RETA-01 Bedienungsanleitung

ABB

ABB FPBA-01 PROFIBUS DP Bedienungsanleitung

ABB

ABB FPBA-01 PROFIBUS DP Installationshandbuch

ABB

ABB 520ADD02 Gebrauchsanweisung

ABB

ABB CEM 05100 Bedienungsanleitung

ABB

ABB Tina 2A Bedienungsanleitung

ABB

ABB SPA-ZC 402 Leitfaden

ABB

ABB 2769522-C Produkthandbuch

ABB

ABB FENA-01 Bedienungsanleitung

Beliebte Adapter Handbücher anderer Marken

PCB Piezotronics

PCB Piezotronics 090B274 Bedienungsanleitung

Auvidea

Auvidea J20 Produkthandbuch

Gossen MetraWatt

Gossen MetraWatt AT3-III E Bedienungsanleitung

Akribis

Akribis ITF-21-BISS-MIT Bedienungsanleitung

Tenda

Tenda W54U Bedienungsanleitung

ROHO

ROHO AGILITY Bedienungsanleitung

PROLiNK

PROLiNK WN2001 Bedienungsanleitung

Hawking

Hawking HUF2 Bedienungsanleitung

Airlink101

Airlink101 AWLC4030 Bedienungsanleitung

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Bedienungsanleitung

Philips

Philips SWA4554S/10 Bedienungsanleitung

JVC

JVC TS-C9D2B Gebrauchsanweisung

NETGEAR

NETGEAR A6100 Bedienungsanleitung

D-Link

D-Link DWA-121 Bedienungsanleitung

Philips

Philips SWA2037 Bedienungsanleitung

Basalte

Basalte 0610-20 Bedienungsanleitung

Yealink

Yealink EHS40 Bedienungsanleitung

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Bedienungsanleitung