ABB COM600 series Bedienungsanleitung

Station Automation COM600

Product Guide

Power Products

ABB2

Station Automation

COM600

Product version: 3.4

1MRS756764 B

Contents

Disclaimer

The information in this document is subject to change without notice and should not be construed as a commitment by ABB Oy. ABB Oy assumes

no responsibility for any errors that may appear in this document.

Trademarks

ABB is a registered trademark of ABB Group. All other brand or product names mentioned in this document may be trademarks or registered

trademarks of their respective holders.

1.Description ............................3

2.Application ............................4

3.Parametersetting .......................5

4. Event and alarm lists .....................6

5. Disturbance record handling ...............6

6.Datahistorian ..........................6

7. Logic processor.........................8

8. Access control and substation security . . . . . . 8

9. Substation integration ....................9

10. Integration of ABB IEDs. . . . . . . . . . . . . . . . . . 9

11. Commissioning and troubleshooting . . . . . . . 9

12. Communication redundancy .............10

13. Technical data ........................11

14.Tools ...............................17

15. Mounting ............................17

16. Ordering.............................18

17.References ..........................19

ABB 3

Station Automation

COM600

Product version: 3.4

1MRS756764 B

Issued: January 2009

Revision: B / 23 Oct 2009

1. Description

COM600, the station automation device of

ABB, is an all-in-one communication gateway,

automation platform and user interface solu-

tion for utility and industrial distribution sub-

stations. The gateway functionality provides

seamless connectivity between substation

IEDs and network-level control and manage-

ment systems. The automation platform with

its logic processor makes COM600 a ﬂexible

implementation platform for substation-level

automation tasks. As a user interface solu-

tion COM600 accommodates web technol-

ogy based functionalities providing access to

substation devices and processes via a web

browser based human machine interface

(HMI).

The COM600 design process has been

guided by the IEC 61850 standard for com-

munication and interoperability of substa-

tion equipment. The communication gateway

functionality of COM600 supports a variety

of commonly used communication protocols

of substation devices. For even greater con-

nectivity, OPC data access and OPC alarms

and events are supported to enable informa-

tion sharing and control with, for example, a

distributed control system (DCS).

The IEC 61131-3 based logic processor can be

programmed to execute automatic sequences

directly via communications media. Further,

the logic processor enables the creation of

both simple control programs and more so-

phisticated applications like load shedding or

fault isolation and network restoration.

The COM600 hardware platform is based on

ruggedized mechanics with no moving parts

subject to wear and tear. Thus, the compact

and robust design is well adapted for harsh

environments. The preinstalled software

and the off-line conﬁguration performed on

a separate computer contribute to a faster

project execution.

OPC Server

IEC 61850

DNP3 Slave

OPC Client

Web server

HMI application

OPC Client

REMOTE

CONTROL

Standard web-browser

Conﬁguration tool on a PC

Connectivity packages

for ABB IEDs

and/or device proﬁles

On-line operation

Conﬁguration phase, off-line

IEC 61850-8-1

REF615

REF 543

REF 542plus

Conf

SCL

Fig. 1 Station Automation COM600 overview

ABB4

Station Automation

COM600

Product version: 3.4

1MRS756764 B

2. Application

COM600 provides gateway functions for map-

ping signals between protection and control

IEDs in industrial or utility substations and

higher-level systems. It further includes an

optional HMI that provides data and informa-

tion from the substation to the users.

COM600 gathers data from protection and

control IEDs and from process devices us-

ing different communication protocols. The

supported protocols can be combined freely

in one station computer, limited only by

the number of hardware interfaces and the

license. COM600 uses web technology to dis-

play data to different users in a professional

and user-friendly manner. The optional slave

protocols enable the transfer of information

to a network control centre (NCC) or distrib-

uted control system (DCS).

COM600 beneﬁts from the potential of the

IEC 61850 standard by using the IEC 61850-

6 substation conﬁguration language (SCL)

and IEC 61850 -7 communications modeling

regardless of protocol used. As the IEC 61850

data modeling is used for all communication

protocols the gateway cross-reference is done

in the same way regardless of the protocol,

for example IEC 61850-8-1 or DNP3.

COM600 can by using the optional web HMI

(requires Mozilla Firefox®, Opera or Microsoft

Internet Explorer with Adobe SVG viewer

3.03) be used for efﬁcient substation visu-

alization, monitoring and control. Measured

values from process devices are displayed on

the HMI. Single-line diagrams can be used to

view any available measured values from the

process devices.

All primary single-line diagram (SLD) devices

are displayed in one screen. The SLD recog-

nizes different voltage levels and different

busbar systems such as single busbar, double

busbar and duplex systems. The four-mode

busbar coloring visualizes the busbar status.

The coloring of the busbar is user conﬁgura-

ble.

EMS/

SCADA

DMS,

OMS

REMOTE

ACCESS -

ENGINEERING

Ethernet switch

RTU/PLC

WAN

TCP/IP protocols

(DNP3, IEC 60870-5-104,

Modbus)

TCP/IP protocols

(IEC 61850, DNP3,

Modbus

)

Serial protocols

(DNP3, Modbus

SPA)

Serial protocols

(DNP3, IEC 60870-5-101,

Modbus)

LAN 1

GPS

RER 111

LON-bus

SPAJ 140

REM 543

REF 542plus DPU2000R

REF615 NON-ABB

IED

NON-ABB

IED

REF615

REF 543

REF 542plus

Fig. 2 Overview of a utility substation using Station Automation COM600

ABB 5

Station Automation

COM600

Product version: 3.4

1MRS756764 B

The single line diagram can be conﬁgured

to include an indication for the local/remote

selection switch. Alarm symbols and generic

symbols can be places in the SLD to give an

even better overview of the status. In addi-

tion, generic control buttons can be added

to control objects. A separate control dialog

is used for controlling the switching device.

It provides information on switching device

identiﬁcation, reservation status and inter-

locking conditions. The select-before-execute

logic is used to prevent unintended opera-

tion. By reserving the switching device for a

single user the risk of controlling the device

from two different locations is eliminated.

Further, COM600 supports the tap changer

function for the RE 500 series transformer

terminals.

Connection examples:

COM600 has by default four serial ports. The

number of serial ports can be increased using

the optional serial card. The four serial ports

enable the connection and combination of

different serial protocols. For example 3 SPA

+ 1 IEC 101 protocol or 2 SPA + 1 IEC 103 +1

IEC 101 protocol.

COM600 can as an option be equipped with

a LON-card enabling the connection of one

plastic or glass LON interface. Alternatively

the number of Ethernet interfaces can be

increased by choosing the optional Ethernet

extension card.

3. Parameter setting

The parameter setting tool (PST) is used for

viewing and/or setting parameters in IEDs

supporting transparent SPA, Modbus or

IEC 61850 parameterization. The PST enables

activation of the parameter setting function

for the chosen IEDs. In addition, it enables

that only selected parameters are shown in

REMOTE

ACCESS -

ENGINEERING

DISTRIBUTED

CONTROL

SYSTEM

Ethernet switch

RTU/PLC

WAN

OPC Client/Server

TCP/IP protocols

(IEC 61850, DNP3,

Modbus

)

Serial protocols

(DNP3, Modbus

SPA)

LAN 1

GPS

RER 111

LON-bus

SPAJ 140

REM 543

REF 542plus DPU2000R

REF615 NON-ABB

IED

NON-ABB

IED

REF615

REF 543

REF 542plus

Fig. 3 Overview of an industrial system using Station Automation COM600

ABB6

Station Automation

COM600

Product version: 3.4

1MRS756764 B

the web HMI of COM600 limiting the number

of visible parameters to the ones that are

considered important for the user. Changes in

the settings require that the user has engi-

neering or administrator rights in COM600.

4. Event and alarm lists

Events and alarms are identiﬁed by date,

time, bay, device, object description or status.

Furthermore, the events and alarms can be

automatically ﬁltered according to voltage

level or bay criteria. Maximum memory ca-

pacity is 65535 events. First-in, ﬁrst-out logic

is used for overwriting events. The user can

export an event list to a .csv ﬁle for further

analysis. COM600 supports printing of events

to an Event Printer for long time archiving.

5. Disturbance record

handling

COM600 automatically downloads distur-

bance records from the connected IEDs. The

disturbance records are saved in the stand-

ard COMTRADE format. In-depth analysis

is enabled using ABB’s Wineve software or

any other commercially available disturbance

record analyzer supporting the COMTRADE

format. Downloading of disturbance records

requires use of the IEC 61850-8-1 communi-

cation protocol.

6. Data historian

The COM600 data historian is a real-time

database designed and optimized for process

information management and extensive his-

tory recording. The data historian is based on

ABB’s cpmPlus Knowledge Manager software.

It combines the beneﬁts of an easy-to-use

real-time database with industrial reliability,

performance, and real-time functionality to

provide an excellent platform for process

information management. The data historian

can be used for accurate process perform-

ance monitoring by following process and

equipment performance calculations with

real-time and history values. Better under-

standing of the process behaviour by join-

ing time-based process measurements with

production and maintenance events helps

Ethernet switch

RS-232/RS-485

serial links 1 - 8

link 1 link 8

LAN 1

Web HMI

LAN 2

Ethernet switch

GPS

IEDIED

Fig. 4 Application example

ABB 7

Station Automation

COM600

Product version: 3.4

1MRS756764 B

Fig. 5 COM600 web HMI showing persisting and ﬂeeting alarms

Fig. 6 COM600 Data historian

ABB8

Station Automation

COM600

Product version: 3.4

1MRS756764 B

the user to understand the process dynamics.

It further provides required information for

learning how to keep the process running.

High performance and reliability, together

with maintenance-free operation, provide a

solid platform for trending. The optional data

historian functionality offers means of stor-

ing, analyzing and presenting process data.

Please note that displaying of data historian

information using the HMI requires that Mi-

crosoft Internet Explorer is used.

7. Logic processor

COM600 offers an straightforward approach

to the languages speciﬁed by the IEC 61131-3

standard for programmable logic controllers

(PLC). The programmable logic processor in

COM600 is offered as a selectable software

option. The PLC programming system ena-

bles programming and execution of auto-

mation tasks. In addition, the IEC 61131-3

programming in COM600 offers on-line and

off-line functionality for engineering and

diagnostics.

The logic process can be used for applica-

tions such as grouping of signals or tripping

of all bus breakers, if one of the breakers

fails to clear the fault. COM600 collects any

analog or binary IED data using standard

serial and TCP/IP based protocols such as

IEC 61850, DNP3 or Modbus. In the created

logic, the logic processor, use the analog and

binary data from the IEDs. The output of the

created logic can be sent to the IEDs for trip-

ping or alarm purposes.

8. Access control and

substation security

To protect COM600 from unauthorized ac-

cess and to maintain information integrity,

COM600 is provided with a four-level, role-

based authentication system with administra-

tor-programmable individual passwords for

the viewer, operator, engineer and admin-

EMS/

SCADA

ENGINEERING

Ethernet switch

RTU/PLC

WAN

TCP/IP protocols

(IEC 61850, DNP3,

Modbus®)

Serial protocols

(DNP3, Modbus®,

SPA)

LAN 1

ELECTRONIC SECURITY PERIMETER

GPS

RER 111

LON-bus

Built-in ﬁrewall

SPAJ 140

REM 543

REF 542plus DPU2000R

REF615 NON-ABB

IED

NON-ABB

IED

REF615

REF 543

REF 542plus

Fig. 7 Substation security

ABB 9

Station Automation

COM600

Product version: 3.4

1MRS756764 B

M M M

REF615 REF615 REF615 REF615

MLink

DISTRIBUTION

CONTROL

SYSTEM

Ethernet switch

Ethernet switch Ethernet switch

GPS

PLANT TCP/IP

7.2 kV

7.2/0.4 kV

0.4 kV

OPC Client/Server

FEEDER 1FEEDER 2FEEDER 3

LOCAL

HMI

Fig. 8 Substation integration

istrator level. Further, the security features

include host-based ﬁrewalls and communi-

cation encryption using the secure HTTPS

(hypertext transfer protocol secure) protocol.

9. Substation integration

COM600 provides connectivity to a range

of ABB systems. The connectivity to ABB’s

low voltage motor control center MNS iS is

provided using an OPC server in COM600.

COM600 receives data from the MNSiS devic-

es and provides a human-machine interface

(HMI) and gateway functionality for a smooth

integration. Further, COM600 offers connec-

tivity to ABB’s Automation System 800xA and

MicroSCADA by means of OPC or other com-

munication protocols.

10. Integration of ABB

IEDs

COM600 supports ABB’s connectivity pack-

age concept which simpliﬁes system conﬁgu-

ration and integration of IEDs. A connectivity

package is a collection of software and spe-

ciﬁc IED information, which enable system

products and tools to connect and interact

with the IED. The connectivity packages re-

duce the risk of errors in system integration,

minimizing device conﬁguration and set-up

times. The engineering in COM600 is done by

selecting the connectivity package for the IED

version and conﬁguration or by importing the

conﬁguration ﬁle from the IED.

11. Commissioning and

troubleshooting

COM600 offers several tools and functions to

support efﬁcient commissioning and trou-

ABB10

Station Automation

COM600

Product version: 3.4

1MRS756764 B

OPC Server

IEC 61850

DNP3 Slave

OPC Client

Web server

HMI application

OPC Client

SCADA

Web HMI

REF615

REF 543

REF 542plus

Ethernet switch

TCP/IP protocols

(IEC 61850, DNP3,

Modbus

)

• Simulation of complete IEDs

• Source data monitoring

• Forcing of source data

• ...

Fig. 9 Commissioning and troubleshooting

bleshooting of the substation. The built-in

IED simulation functionality enables testing

and verifying of the correct operation of the

HMI and gateway conﬁguration of COM600

without any physical connection of IEDs.

Further, communication diagnostic events can

be enabled to track all messages being sent

by or received from the IEDs.

Using the Station Automation Builder 600

(SAB600) tool provided with COM600 on-

line diagnostic data, real-time process data,

the communication channels and the control

function of the IEDs can be analyzed without

separate protocol analyzers.

12. Communication

redundancy

To maintain and improve the reliability of the

communication network and the communi-

cation between the IEDs and COM600, IEC

62439/PRP (parallel redundancy protocol)-

based communication is supported. PRP is

based on duplicated networks, where each

message is sent via both networks. The ﬁrst

of the received messages is accepted whereas

the duplicate is discarded. Message replica-

tion and discarding is done by the DuoDriver

in COM600. Further, the DuoDriver hides

the two networks from upper level applica-

tions. IEC 62439/PRP-based communication

requires that COM600 is equipped with the

optional LAN card and that the IEDs used

support PRP.

In addition, COM600 supports switch fault

tolerance (SFT) provided that the optional

LAN-card and COM600 are connected to

two separate switches. SFT creates a failover

relationship between the two adapters con-

nected to separate switches. The manager

responsibility is transferred from one agent

to the other in case of a failure. The Switch

Fault Tolerance feature of the Intel network

adapter requires the Teaming Feature to be

enabled.

Andere Handbücher für COM600 series

Inhaltsverzeichnis

Andere ABB Tor Handbücher

ABB

ABB i-bus KNX MG/S 11.100.1.1 Bedienungsanleitung

ABB

ABB Ability Naveo Pro GW 1.0 Bedienungsanleitung

ABB

ABB 83342 Bedienungsanleitung

ABB

ABB Ekip E-Hub Bedienungsanleitung

ABB

ABB i-bus KNX EnOcean EG/A 32.2.1 Bedienungsanleitung

ABB

ABB ARG600 ANSI Bedienungsanleitung

ABB

ABB COM610 Bedienungsanleitung

ABB

ABB COM 610 *2.1 Bedienungsanleitung

ABB

ABB Pluto Series Gebrauchs- und Pflegehandbuch

ABB

ABB DG/S 1.1 Bedienungsanleitung

ABB

ABB Ability Smart Sensor Technisches Handbuch

ABB

ABB ARP600 Bedienungsanleitung

ABB

ABB RER601 Bedienungsanleitung

ABB

ABB 83342-500 Bedienungsanleitung

ABB

ABB Ability Bedienungsanleitung

ABB

ABB COM600 series Merkblatt

ABB

ABB IPGW-Kit Bedienungsanleitung

ABB

ABB ARR600 Bedienungsanleitung

ABB

ABB M2302 Bedienungsanleitung

ABB

ABB Busch-Welcome Bedienungsanleitung

ABB

ABB M2302 Bedienungsanleitung

ABB

ABB AWIN GW120 Bedienungsanleitung

ABB

ABB AWIN GW100 Bedienungsanleitung

ABB

ABB ARM600 Bedienungsanleitung

Beliebte Tor Handbücher anderer Marken

LST

LST M500RFE-AS Bedienungsanleitung

Kinnex

Kinnex Media Gateway Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace 2N StarGate Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Bedienungsanleitung

Telsey

Telsey CPVA 500 - SIP Bedienungsanleitung

RTA

RTA 460A-NNA4 Technisches Datenblatt

Shaw

Shaw Gateway HDPVR Bedienungsanleitung

Commander

Commander Pulse Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Bedienungsanleitung

NETGEAR

NETGEAR C6300BD Bedienungsanleitung

Amit

Amit CDW531AM Bedienungsanleitung

HMS

HMS Netbiter EasyConnect EC150 Bedienungsanleitung

Huawei

Huawei EchoLife HG620 Bedienungsanleitung

AT&T

AT&T U-verse 3801 Gebrauchs- und Pflegehandbuch

Logic IO

Logic IO RTCU MX2 turbo Bedienungsanleitung

Suttle

Suttle MediaMAX MXM-521 Bedienungsanleitung

RTA

RTA 460MCBC-N2E Technisches Datenblatt