ABB C11 Bedienungsanleitung
C11
User Manual
C11
User Manual
Document ID: 2CMC486001M0201
Revision: D
2020-10-01
Disclaimer The information in this document is subject to change without notice and should
not be construed as a commitment by ABB Spa. ABB Spa assumes no responsi-
bility for any errors that may appear in this document.
In no event shall ABB Spa be liable for direct, indirect, special, incidental or con-
sequential damages of any nature or kind arising from the use of this document,
nor shall ABB AB be liable for incidental or consequential damages arising from
use of any software or hardware described in this document.
Copyrights This document and parts thereof must not be reproduced or copied without written
permission from ABB Spa, and the contents thereof must not be imparted to a
third party nor used for any unauthorized purpose.
The software or hardware described in this document is furnished under a license
and may be used, copied, or disclosed only in accordance with the terms of such
license.
© Copyright 2020 ABB Spa. All rights reserved.
Trademarks ABB Spa is a registered trademark of the ABB Group. All other brand or product
names mentioned in this document may be trademarks or registered trademarks
of their respective holders.
Contact ABB SPA
via Dell'industria 18
20009 - Vittuone - Milano
Italy
Tel: +39 02 2415 0000
Table of Content
Table of Content
1 About this Manual ........................................................................................ 3
2 Product Overview ......................................................................................... 5
3 Installation .................................................................................................... 9
3.3.1 Wiring Diagrams ................................................................................................ 13
3.3.1.1 Outputs/inputs ....................................................................................... 13
4 User Interface ............................................................................................. 15
5 Meter Settings ............................................................................................ 21
6 Technical Description ................................................................................ 27
7 Technical data ............................................................................................ 33
8 Troubleshooting ......................................................................................... 37
9 Service & Maintenance .............................................................................. 39
1
Table of Content
2
About this Manual
Chapter 1: About this Manual
Overview This chapter describes the conventions used in this manual. It also contains expla-
nations and definitions of terms and definitions that are used in the document.
In this chapter The following topics are covered in this chapter:
1.1 Conventions Used in this Document ..................................................... 4
3
About this Manual
1.1 Conventions Used in this Document
Symbols This document contains warning, caution, note and tip icons that point out safety
related conditions and other important or useful information.
Symbol Description
The electrical warning icon indicates the presence of a hazard which
could result in electrical shock.
The caution icon indicates important information or a warning related
to the concept discussed in the text. It might indicate the presence of a
hazard which could result in corruption of software or damage to equip-
ment or property.
The note icon alerts the reader to important facts and conditions.
The tip icon gives the reader useful information related to the concept
discussed in the text.
4
Product Overview
Chapter 2: Product Overview
Overview This chapter describes the parts of the meter. It also contains information about
the meter type.
In this chapter The following topics are covered in this chapter:
2.1 Meter Parts ............................................................................................ 6
2.2 Meter Type ............................................................................................ 7
5
Product Overview
2.1 Meter Parts
Illustration The parts of the meter are shown in the illustration below:
Parts description The following table describes the parts of the meter:
20 21
4
9
2
8
1
6
5
3
7
6
8
Item Description Comments
1 DIN-lock To fasten the meter on the DIN-rail.
2 Output Terminal connections for the output.
3 Push button For programming and reading metering
data.
4 LED Flashes in proportion to the energy con-
sumed.
5 Display LCD for meter reading
6 Sealing points Seal thread can be used to seal the
cover.
7 Sealable terminal cover Sealable cover to protect the terminal
blocks.
8 Terminal blocks Terminal for all voltages and currents.
9 Product label Contains information about the meter
type.
6
Inhaltsverzeichnis
Andere ABB Messgerät Handbücher
ABB
ABB Sensyflow FMT700-P Bedienungsanleitung
ABB
ABB SM1000 Bedienungsanleitung
ABB
ABB K-TEK AccuTrak AT500 Bedienungsanleitung
ABB
ABB 2410 Bedienungsanleitung
ABB
ABB LWT300 series Bedienungsanleitung
ABB
ABB VSN730 Bedienungsanleitung
ABB
ABB MagMaster Bedienungsanleitung
ABB
ABB 4690 Series Handbuch
ABB
ABB Endura AZ20 series Bedienungsanleitung
ABB
ABB ProcessMaster FEP630 series Bedienungsanleitung
ABB
ABB GLA132 Series Bedienungsanleitung
ABB
ABB 8235 Chloride Bedienungsanleitung
ABB
ABB FSM4000 Series Bedienungsanleitung
ABB
ABB Navigator 600 Phosphate Bedienungsanleitung
ABB
ABB Navigator 550 Bedienungsanleitung
ABB
ABB ACF-NT Bedienungsanleitung
ABB
ABB GLA232 Series Bedienungsanleitung
ABB
ABB M1M 30 Series Bedienungsanleitung
ABB
ABB SensyMaster FMT230 Installations- und Betriebshandbuch
ABB
ABB EV3 Bedienungsanleitung
