ABB SmartMedia SM2000 Montageanleitung

INFORMATION

No. INF02/61 Date: June 2002 Product:SM2000 Videographic Recorder

Manual: IM/SM2000

SM2000

Compact Flash Hardware Installation

noitpircseD.oNtraPytQ

ylbmessA-buShsalFtcapmoC2600/0002RG1

wercS01x5.2M32811B2

kniLBCP0529B2

tcapmoC0002MS–teehSnoitamrofnI noitallatsnIerawdraHhsalF 16/20FNI1

2 Tools Required

• Medium, flat-bladed screwdriver

• No. 1 Pozidriv screwdriver

3 Fitting Media Board

Sub-Assembly – Figs. 3.1 to 3.5

Caution. The instrument is vulnerable to

electrostatic damage. Wear an anti-static strap or

dismantle the unit on an anti-static workbench.

1) Isolate the instrument from the power supply.

2) Remove the instrument from its case – see Fig. 3.1.

1 Introduction

This Information Sheet describes the procedure for fitting

Compact Flash hardware to SM2000 instruments.

The Compact Flash Media Service Pack, GR2000/0700,

includes the following items:

Withdraw the instrument

from the case

Remove tamper-proof seal

(if fitted)

Unscrew the jacking screw

Fig. 3.1 Removing the Instrument from its Case

Information. Refitting is the

reverse of removal.

Remove pozidriv screws

(one each side)

Lift up top cover

Remove top cover

Remove PCB locking bar

Fig. 3.2 Removing the Chassis Top Cover and PCB Locking Bar

4) Remove the existing media board sub-assembly –

see Fig. 3.3.

…3 Fitting Media Board

Sub-Assembly – Figs. 3.1 to 3.5

3) Remove the chassis top cover and PCB locking bar –

see Fig. 3.2.

Remove pozidriv screws

(1 each side)

Disconnect configurator

board ribbon cable

Lift main board from

motherboard and withdraw

media board

Lift black

retaining flap

Disconnect

flexi-circuit

Media board

Main board

✶

Note. Flexi-circuit is not present if

neither Compact Flash nor SmartMedia

option is already fitted to the instrument.

Information. Refitting is the

reverse of removal.

Fig. 3.3 Removing the Media Board Sub-Assembly

8) Refit the instrument to the case – see Fig. 3.1.

9) Restore the power supply to the instrument.

1Check that PCB link LK1

is fitted and is in the

correct position for

Compact Flash hardware.

5V Position

SmartMedia

3.3V Position

Compact Flash

LK1

Fig. 3.4 PCB Link LK1 Positions

6) Fit the new media board sub-assembly – see Fig. 3.3.

7) Refit the PCB locking bar and chassis top cover –

see Fig. 3.5.

…3 Fitting Media Board

Sub-Assembly – Figs. 3.1 to 3.5

5) Check the position of PCB link LK1 – see Fig. 3.4.

EMC Contacts

Position top cover as shown

Slide forward

Lower rear

Refit pozidriv screws

(one each side)

Refit PCB locking bar

ensuring the slots

in the bar locate correctly

on the boards and chassis

Caution. When positioning the

chassis top cover, take care not to

damage the EMC contacts.

Fig. 3.5 Refitting the PCB Locking Bar and Chassis Top Cover

INF02/61 Issue 1

The Company’s policy is one of continuous product

improvement and the right is reserved to modify the

information contained herein without notice.

Printed in UK (06.02)

ABB Limited

Howard Road, St. Neots

Cambridgeshire, PE19 8EU

Tel: +44 (0)1480 475 321

Fax: +44 (0)1480 217 948

ABB Inc.

125 E. County Line Road

Warminster, PA 18974

USA

Tel: +1 215-674-6000

Fax: +1 215-674-7183

ABB has Sales & Customer Support expertise in over

100 countries worldwide

www.abb.com

Andere Handbücher für SmartMedia SM2000

Andere ABB Messgerät Handbücher

ABB

ABB HART FEP300 Installations- und Betriebshandbuch

ABB

ABB Relion 670 series Kurzanleitung

ABB

ABB ICOS GLA151 Series Bedienungsanleitung

ABB

ABB LS4000 Bedienungsanleitung

ABB

ABB FSM4000 Series Bedienungsanleitung

ABB

ABB Relion RES670 Bedienungsanleitung

ABB

ABB SM3000 Bedienungsanleitung

ABB

ABB ProcessMaster FEP630 series Bedienungsanleitung

ABB

ABB Relion RES670 Bedienungsanleitung

ABB

ABB EXGP Bedienungsanleitung

ABB

ABB 4620 Bedienungsanleitung

ABB

ABB GLA131 Series Bedienungsanleitung

ABB

ABB GLA132 Series Bedienungsanleitung

ABB

ABB LevelMaster 7100 Bedienungsanleitung

ABB

ABB LS4000 Bedienungsanleitung

ABB

ABB AX410 Bedienungsanleitung

ABB

ABB C1900 Series Bedienungsanleitung

ABB

ABB Navigator 550 Bedienungsanleitung

ABB

ABB NGC8206 Bedienungsanleitung

ABB

ABB FSM4000-SE41F Bedienungsanleitung

ABB

ABB Sensyflow iG Bedienungsanleitung

ABB

ABB Sensyflow FMT400-VTS Bedienungsanleitung

ABB

ABB AWT210 Bedienungsanleitung

ABB

ABB MagMaster MF/F Kurzanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung