ABB ACQ580 Bedienungsanleitung

LVD-EOTKN093U-EN REV A

Effective:2022-06-17 1

—

Technical Note 093

Replacing an ETM with the keypad

Easy retrofit or add to any system

ETMs (elapsed time meters) areimportant for VFDs, especially in the W&WW industry. They are used to view equipment

run times, which is beneficial for scheduling maintenance. The traditionalsolution isto install aseparate ETM on the

VFD control panel. While functional, adding a separate ETM to theVFD control panel today adds unnecessary costs

since the 580-drive series has an ETM built into the control panel (keypad). The VFD’s built in ETM is readily available

and non-resettable on the control panel’s “home view” and does not require diving deep into the VFD parameters. The

ETM is flexible and shows hours, days of running, or how long the VFD has been powered. This document is applicable

for ACH580, ACQ580, and ACS580 drives and will show how to setup the ETM on the keypad’s home screen.

Accessing and setting up the ETM on the keypad (control panel) home screen

The ETM functionality is accessed on the control panel by selecting the following:

Options > Edit Home view > Select Screen Location to insert ETM > Edit > Parameter > Other > 05 Diagnostics

> 05.03 Hours run (hours)

Refer to the control panel screen shots below for step-by-step instructions to access the different ETM parameters.

Note: the example below is froman ACQ580 drive, the steps areidentical for the ACH580 and ACS580 drives. This run-

time counter is non-resettable.

Steps for setting up 05.03 Hours run (hours)

Figure 1

1. Open Options

From the Home view, press the left softkey to open Options.

See Figure 1.

LVD-EOTKN093U-EN REV A

Effective:2022-06-17 2

Figure 2

2. Navigate to Edit Home view

Press the down arrow key to navigate to Edit Home view and press the

right softkey to select Edit Home view. See Figure 2.

Figure 3

3. Select panel home screen to display ETM

Press the left or right arrow keys to select the panel home screen where

the ETM is to be displayed and then press the Add using the right

softkey. See Figure 3.

Note: up to three parameters can be displayed per panel home screen.

See Figure 1.

Figure 4

4. Select Parameter

Press Edit using the right softkey. See Figure 4.

Figure 5

5. Navigate to Other

Press the down arrow key to navigate to Other and press the right

softkey. See Figure 5.

LVD-EOTKN093U-EN REV A

Effective:2022-06-17 3

Figure 6

6. Navigate to Parameter 05 Diagnostics

Press the down arrow key to navigate to 05 Diagnostic and press the

right softkey to Select this parameter. See Figure 6.

Figure 7

7. Navigate to Parameter 05.03 Hours run

Press the down arrow key to navigate to 05.03 Hours run and press the

right softkey to Select this parameter. See Figure 7.

Figure 8

8. Select Done

Press Done using the left softkey. See Figure 8. The Hours run is now

shown in the Parameter line.

Figure 9

9. Navigate to the Run-time counterhome screen

Press either the left or right keys to navigate to the Hours run counter

home screen. See Figure9.

The Hour run counter displays the number of hours the VFD has

powered the motor.

Note: the run counters can also be displayed in the number of days the VFD has powered the motor by selecting 05.02

Run-time counter (days) in step 7 above.

LVD-EOTKN093U-EN REV A

Effective:2022-06-17 4

Steps for setting up 05.01 Powered or On-time counter

Figure 1

10. Navigate to Parameter 05.01 On-time counter

Follow steps 1 through 6 from above. Press the down arrow key to

navigate to 05.01 Hours run and press the right softkey to Select this

parameter. See Figure 10.

Figure 1

11. Select Done

Press Done using the left softkey. The On-time counter is now shown in

the Parameter line. See Figure 11.

Figure 12

12. Navigate to the On-time counterhome screen

Press either the left or right keys to navigate to the On-time counter

home screen. See Figure 12.

The On-time counter displays the number of days the VFD has powered.

Advantages of using the built-in ETM

Adding a separate ETM to a panel adds unnecessary costs to the panel including wiring and a relay (see Figure 13). An

advantage of using the VFD keypad for the ETM, is that the run time information can be communicated through a

SCADAsystem as opposed to using a separate ETM which cannot communicate without providing additional ancillary

equipment. Also, the ETM screen can easily be added on the keypad VFD panel which did not have a separate ETM built

into the panel.

Figure 13

In summary, the 580 drives series keypad can be used to replace a separately mounted ETM on the VFD panel. The

LVD-EOTKN093U-EN REV A

Effective:2022-06-17 5

keypad counters can quickly besetup to show three different counters which include the motor run timein days, the

motor run time in hours, and how long the VFD has been powered for in days. This information can be beneficial for

scheduling maintenance. While functional, adding a separate ETM to theVFD control panel adds unnecessary costs

since the 580-drive series has it built into the keypad.

Andere Handbücher für ACQ580

Inhaltsverzeichnis

Andere ABB Medienkonverter Handbücher

ABB

ABB Modbus AN00198 Referenzhandbuch

ABB

ABB CC-E/TC Bedienungsanleitung

ABB

ABB ACS880-1607LC Bedienungsanleitung

ABB

ABB DCS 500B Bedienungs- und Montageanleitung

ABB

ABB SCC-K Bedienungsanleitung

ABB

ABB ACS880-1607LC Bedienungsanleitung

ABB

ABB MAG-SM Schulungshandbuch

ABB

ABB DLynxII Series Montage- und Bedienungsanleitung

ABB

ABB ACS 400 Bedienungsanleitung

ABB

ABB ACS880-1604 Bedienungsanleitung

ABB

ABB DCS 600 MultiDrive Series Bedienungsanleitung

ABB

ABB DCS 600 MultiDrive Series Bedienungsanleitung

ABB

ABB ACS 600 MultiDrive Bedienungsanleitung

ABB

ABB ACS880-87LC-4000A/4021A-7 Bedienungsanleitung

ABB

ABB ACH580-01 Series Installationshandbuch

ABB

ABB ACS880-1604LC Bedienungsanleitung

ABB

ABB ACS150 series Installationshandbuch

ABB

ABB ACS800-67LC Bedienungsanleitung

ABB

ABB ACH580-01 Series Installationshandbuch

ABB

ABB ACS580-01 drives Bedienungsanleitung

ABB

ABB TEIP11 Bedienungsanleitung

ABB

ABB ACS150 series Bedienungsanleitung

ABB

ABB ACS 600 Benutzerhandbuch

ABB

ABB DCS 600 MultiDrive Series Bedienungsanleitung

Beliebte Medienkonverter Handbücher anderer Marken

SoundTraxx

SoundTraxx Blunami BLU-2200 Bedienungsanleitung

SPROLINK

SPROLINK VA1 Bedienungsanleitung

Acclaim Lighting

Acclaim Lighting DDC-1-AC Bedienungsanleitung

Nikon

Nikon AF-S TC-20E III Bedienungsanleitung

Axis

Axis AXIS Q7406 Bedienungsanleitung

Omega

Omega TAC80B-J Bedienungsanleitung

Zoom

Zoom Thunderbolt TAC-2R Bedienungsanleitung

OST

OST iConverter 10/100M Bedienungsanleitung

Vertiv

Vertiv Netsure Bedienungsanleitung

birddog

birddog MINI Bedienungsanleitung

Roland

Roland GI-10 Bedienungsanleitung

Wallenstein

Wallenstein WX310 Bedienungsanleitung

Pace

Pace MSS 200-1 Bedienungsanleitung

Solar Converters

Solar Converters EQ 12/24-50 Bedienungsanleitung

CYP

CYP EL-7400V Bedienungsanleitung

TIE

TIE MIDI 1i1o Bedienungsanleitung

DCS

DCS Vivaldi Upsampler Bedienungsanleitung

Westermo

Westermo MCW-211 SERIES Bedienungsanleitung