Abrex-System ViperX 3B Bedienungsanleitung
mod.: 3B
OPERATION AND MAINTENANCE MANUAL
The ViperX model with the 3B orbit a pneumatic sander designed and built
for sanding small surfaces.
Model ViperX3B
Orbit 3 mm
Ø Pad 75mm
Holes 6 holes
RPM 6500 - 11000
Weight 675 g
Working pressure 6.2 Bar – 90 PSI
Air consumption 340 l/min
Air inlet ¼” Gas
Pad thread M8
Extraction Centralized
Noise: 82 db A
Vibrations
max aeq sum: 3B = 9.54 m/s²
5
341
2
USE: connect ViperX to the compressed air supply (1)
using an internal Ø8 mm and external Ø10 mm tube.
Connect the Ø 29 mm dust extraction hose to the swiv-
el connector (2). Place ViperX on the surface to be sand-
ed, hold it rmly and press on the start lever (3) with the
palm of the hand to start the pad rotating.The side lever
(4) adjusts the rotation speed (RPM). ViperX stops rotat-
ing when you lift the palm of your hand from the start
lever. To replace the pad, remove the air and extraction
hoses, unscrew the central M8 screw (5), remove the
worn pad, position the new one in place and tighten the
M8 screw.
MAINTENANCE: periodically lubricate the air and extraction connections
with pneumatic oil (use Orlen Pneumatic VG 32 oil, ISO viscosity grade: 32).
After each use, perform general cleaning and check that the start/stop lever is
working. Do not use liquids such as water or solvents.
If any abnormality is noticed in the rotation (RPM) contact Abrex-System.
DISPOSAL: separate the components according to type and material. Take
them to authorized disposal facilities.
REPLACEMENT PADS
Pad Model Screw
thread Weight Ø Holes Hardness Velcro
®
System Computer Code
FUSION M 8 675 g 75 mm 6 Medium ●SVIPER075F1
DECLARATION OF CONFORMITY
Abrex System Srl, via del Viticolotore, 11, Loc. Poggio
Piccolo, 40023 Castel Guelfo di Bologna (BO), Italy,
declares under its sole responsibility that ViperX
versions 3B are designed and built in compliance
with the following European standards:
Machine Directive 2006/42/CE
UNI EN ISO 5349:2004
UNI EN ISO 11148-8:2012
UNI EN ISO 4414:2012
WARRANTY: the warranty on ViperX™ tools is for 1 year and is extended
to 2 years if the tool is registered within 30 days of purchase. The warranty
for industrial use is for 1 year. Each tool must be individually registered
on the www.abrex-system-tools.com website. The warranty for ViperX™
tools covers all manufacturing defects and any defective materials
used in the construction of the tool. For the warranty to be valid,
ViperX™ pneumatic tools must be used and stored in accordance with the
instructions for use in the manual provided in each tool box. The warranty
does not cover the tool in the following cases:
- Damage due to accidental shocks or falls.
- Transport damage.
- Improper use in unsuitable environments or exposure to extreme
temperatures.
- Sanding of wet materials or in the presence of solvents and/or liquids.
- Damage caused by the use of non-original accessories.
- Damage caused by air ows higher than recommended.
- Failure to lubricate the tool.
- Tool parts subject to wear: bearings, rotors and blades, dust extraction bell,
pad.
- Maintenance performed by third parties and/or centres unauthorized by the
manufacturer.
- Malfunction due to tampering with the tool by the customer and/or third
parties.
Repairs carried out under the warranty do not extend the warranty period.
ABREX SYSTEM SRL - Via del Viticoltore 11 - Loc. Poggio Piccolo 40023 - Castel Guelfo di Bologna (BO) Italy
Phone: +39.0542.670827 - www.abrex-system.com
10
26
25
24
23
22
21
20
19
17
18
15
16
14
12
9
5
11
4
3
2
1
13
28
27
29
6
7
7A
8
Pos. Code Name Qty
1LCHUT_01529 START LEVER 1
2LCHUT001528 GRIP 1
3LCHUT000010 COMPRESSION WASHER 1
4LCHUT1810NS UPPER BEARING 1
5LCHUT_01515 MACHINE BODY 1
6LCHUT001552 SILENCER 1
7LCHUT01541R GASKET 1
7A LCHUT00RA16 ALLUMINIUM WASHER 1
8LCHUT01541B AIR INLET 1
9LCHUT01543V EXTRACTION SHROUD 1
10 LCHUT001530 AIR KIT 1
11 LCHUT1352PV EXTRACTION SLEEVE 1
12 LCHUT011524 ROTOR FOR 2.5/5 mm ORBITAL SANDER 1
13 LCHUT01523S BLADE KIT (5) 1
14 LCHUT1321CW PLATE C72 / 0.4 mm 1
15 LCHUTAB1521 ALUMINIUM FLANGE LEFT THREAD 1
16 LCHUT001810 LOWER BEARING 1
17 LCHUT015195 ROCKER FOR 2.5 mm ORBITAL SANDER 1
18 CLINDS68886 TAB 1
19 LCHUT000012 COMPRESSION WASHER 1
20 LCHUT017212 BEARING 1
21 LCHUT261901 SPACER 1
22 LCHUT017211 PROTECTED BEARING 1
23 CRON28X1505 DUST WASHER 1
24 LCHUT01544G PAD SUPPORT PIN 1
25 LCHUT000028 COMPRESSION WASHER 1
26 SVIPER075F1 PAD D75 1
27 CVITM8ZN109 GALVANISED SCREW M8 1
28 CVIT0000703 SELF-TAPPING SCREW 3x7 mm 2
29 LCHTU000800 5 mm HEX KEY
(_) complete the code with the letter of the required color - T=Tiffany -
Y=Yellow - W=White
Model ViperX3B_
Orbit 3 mm
Ø Pad 75 mm
Inhaltsverzeichnis
Andere Abrex-System Sander Handbücher
