Connecting the Device Holder to the
Handlebar Mount
Connect the (a) Device holder to the
(b) Handlebar mount as shown in the
diagram to the left. Slide the (5) Neck
Connector into the (6) Connecting slot on
the (a) Device holder. Make sure the (5)
Neck connector is inserted securely and
clicks into place.
Disconnecting the Device Holder from the Handlebar Mount
To disconnect, hold down the lever on the (5) Neck Connector and slide it o the
(b) Connecting slot by using gentle pressure towards the (8) Headphone port.
When disconnected, the (a) Device holder’s protective and weather guard design
allows for portable storage and outdoor use.
Attaching the Handlebar Device Mount
to your Handlebar
First, loosen and remove the (3) Adjust-
ment knob by turning counter-clockwise.
Remove the (1) Handlebar clamp and
adjust by inserting the (2) Hinge into one
of the three grooves depending on your
handlebar thickness. Once you nd a suit-
able conguration, t the (b) Handlebar
mount onto your handlebar. Reattach the
(3) Adjustment knob to the (b) Handlebar
mount by turning clockwise until it is
securely tightened.
Operating Instructions:
