Acer Altos R310 Bedienungsanleitung

Acer Altos R310

User’s Guide

BB!S421!.!FO/cppl!!Qbhf!j!!Xfeoftebz-!Nbsdi!35-!3115!!6 1:!QN

Changes may be made periodically to the information in this publication without obligation

to notify any person of such revision or changes. Such changes will be incorporated in new

editions of this manual or supplementary documents and publications. This company makes

no representations or warranties, either expressed or implied, with respect to the contents

herein and specifically disclaims the implied warranties of merchantability or fitness for a

particular purpose.

Record the model number, serial number, purchase date, and place of purchase information in

the space provided below. The serial number and model number are recorded on the label

affixed to your computer. All correspondence concerning your unit should include the serial

number, model number, and purchase information.

No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in

any form or by any means, electronic, mechanical, photocopy, recording, or otherwise,

without the prior written permission of Acer Incorporated.

Model Number : _________________________________

Serial Number: ___________________________________

Purchase Date: ___________________________________

Place of Purchase: ________________________________

Acer Altos R310

User’s Guide

1st Issue: March 2004

Acer and the Acer logo are registered trademarks of Acer Inc. Other company’s product

names or trademarks are used herein for identification purposes only and belong to their

respective companies.

BB!S421!.!FO/cppl!!Qbhf!jj!!Xfeoftebz-!Nbsdi!35-!3115!!6 1:!QN

iii

Notices

FCC notice

Class A devices do not have an FCC logo or FCC IDE on the label. Class

B devices have an FCC logo or FCC IDE on the label. Once the class of

the device is determined, refer to the following corresponding

statement.

Class A equipment

This device has been tested and found to comply with the limits for a

Class A digital device pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial

environment. This device generates, uses, and can radiate radio

frequency energy, and if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

Operation of this device in a residential area is likely to cause harmful

interference in which case the user will be required to correct the

interference at his own expense.

However, there is no guarantee that interference will not occur in a

particular installation. If this device does cause harmful interference to

radio or television reception, which can be determined by turning the

device off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the device and receiver

• Connect the device into an outlet on a circuit different from that

to which the receiver is connected

• Consult the dealer or an experienced radio/television technician

for help

BB!S421!.!FO/cppl!!Qbhf!jjj!!Xfeoftebz-!Nbsdi!35-!3115!!6 1:!QN

Shielded cables

All connections to other computing devices must be made using

shielded cables to maintain compliance with FCC regulations.

Peripheral devices

Only peripherals (input/output devices, terminals, printers, etc.)

certified to comply with the Class A or Class B limits may be attached to

this equipment. Operation with noncertified peripherals is likely to

result in interference to radio and TV reception.

Caution: Changes or modifications not expressly approved by

the manufacturer could void the user’s authority, which is granted

by the Federal Communications Commission, to operate this

server.

Use conditions

This part complies with Part 15 of the FCC Rules. Operation is subject to

the following two conditions: (1) this device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

Canadian users

This Class A/Class B digital apparatus meets all requirements of the

Canadian Interference-Causing Equipment Regulations.

Laser compliance statement

The CD-ROM drive in this server is a laser product. The CD-ROM drive’s

classification label (shown below) is located on the drive.

CLASS 1 LASER PRODUCT

CAUTION: INVISIBLE LASER RADIATION WHEN OPEN. AVOID

EXPOSURE TO BEAM.

BB!S421!.!FO/cppl!!Qbhf!jw!!Xfeoftebz-!Nbsdi!35-!3115!!6 1:!QN

Important safety instructions

Read these instructions carefully. Save these instructions for future

reference.

1 Follow all warnings and instructions marked on the product.

2 Unplug this product from the wall outlet before cleaning. Do not

use liquid cleaners or aerosol cleaners. Use a damp cloth for

cleaning.

3 Do not use this product near water.

4 Do not place this product on an unstable cart, stand, or table. The

product may fall, causing serious damage to the product.

5 Slots and openings on the back or bottom side of the chassis are

provided for ventilation; to ensure reliable operation of the

product and to protect it from overheating, these openings must

not be blocked or covered. The openings should never be blocked

by placing the product on a bed, sofa, rug, or other similar surface.

This product should never be placed near or over a radiator or

heat register, or in a built-in installation unless proper ventilation

is provided.

6 This product should be operated from the type of power indicated

on the marking label. If you are not sure of the type of power

available, consult your dealer or local power company.

7 Do not allow anything to rest on the power cord. Do not locate

this product where persons will walk on the cord.

8 If an extension cord is used with this product, make sure that the

total ampere rating of the equipment plugged into the extension

cord does not exceed the extension cord ampere rating. Also,

make sure that the total rating of all products plugged into the

wall outlet does not exceed the fuse rating.

9 Never push objects of any kind into this product through chassis

slots as they may touch dangerous voltage points or short out

parts that could result in a fire or electric shock. Never spill liquid

of any kind on the product.

10 Do not attempt to service this product yourself, as opening or

removing covers may expose you to dangerous voltage points or

other risks. Refer all servicing to qualified service personnel.

11 Unplug this product from the wall outlet and refer servicing to

qualified service personnel under the following conditions:

BB!S421!.!FO/cppl!!Qbhf!w!!Xfeoftebz-!Nbsdi!35-!3115!!6 1:!QN

a When the power cord or plug is damaged or frayed

b If liquid has been spilled into the product

c If the product has been exposed to rain or water

d If the product does not operate normally when the operating

instructions are followed. Adjust only those controls that are

covered by the operating instructions since improper

adjustment of other controls may result in damage and will

often require extensive work by a qualified technician to

restore the product to normal condition.

e If the product has been dropped or the cabinet has been

damaged

f If the product exhibits a distinct change in performance,

indicating a need for service.

12 Replace the battery with the same type as the product's battery we

recommend. Use of another battery may present a risk of fire or

explosion. Refer battery replacement to a qualified service

technician.

13 Warning! Batteries may explode if not handled properly. Do not

disassemble or dispose of them in fire. Keep them away from

children and dispose of used batteries promptly.

14 Use only the proper type of power supply cord set (provided in

your accessories box) for this unit. It should be a detachable type:

UL listed/CSA certified, type SPT-2, rated 7A 125V minimum, VDE

approved or its equivalent. Maximum length is 15 feet (4.6

meters).

BB!S421!.!FO/cppl!!Qbhf!wj!!Xfeoftebz-!Nbsdi!35-!3115!!6 1:!QN

Notices iii

FCC notice iii

Class A equipment iii

Shielded cables iv

Peripheral devices iv

Use conditions iv

Canadian users iv

Laser compliance statement iv

Important safety instructions v

1 System information 1

Product briefing 3

Processor 3

Memory subsystem 3

Storage 4

Graphics interface 4

Networking 4

I/O ports 4

Serial ATA ports 4

Caring features 5

Product specification summary 6

2 System tour 7

System board 9

Mainboard layout 9

Jumper settings (JP1) clear CMOS 12

Jumper settings (JP2) Password 12

Jumper settings (JP4) Boot Block 12

External and internal structure 13

Front panel 13

Rear panel 14

Internal components 16

3 Getting Started 17

Setting up the system 19

Preinstallation requirements 19

Selecting a site 19

Checking the package contents 19

System startup 20

Turning on the system 20

Turning off the system 21

Power-on problems 21

Contents

BB!S421!.!FO/cppl!!Qbhf!wjj!!Xfeoftebz-!Nbsdi!35-!3115!!6 1:!QN

BIOS POST Checkpoint Codes 22

4 Configuring the system 37

Upgrading the system 39

Installation precautions 40

ESD precautions 40

Preinstallation instructions 41

Post-installation instructions 41

Opening the server 42

Before opening the server 42

To remove the top panel 43

To replace the top panel 44

Installing expansion cards 45

To install an expansion card 45

Installing and removing a hard disc drive 47

Removing a hard disc 47

Installing a hard disc 48

Upgrading the CPU 50

Removing a CPU 50

Installing a CPU 52

Upgrading the system memory 54

Memory configuration 54

To remove a DIMM 55

To install a DIMM 56

Reconfiguring the system memory 56

5 BIOS setup 57

BIOS setup 59

Entering BIOS setup 60

Main 62

Advanced 64

PCI Configuration 66

Peripheral Configuration 67

Boot Settings Configuration 68

Event Log Configuration 70

Console Redirection 72

System Health Monitoring 74

Alert Standard Format (ASF) configruation 75

Power 76

Boot 77

Security 78

Exit 79

BB!S421!.!FO/cppl!!Qbhf!wjjj!!Xfeoftebz-!Nbsdi!35-!3115!!6 1:!QN

Appendix A: Management software installation 81

Installing ASM 83

System requirements 83

ASM Agent 83

ASM Console 83

System setup 83

Installing ASM Agent (Windows version) 84

Installing ASM Console (Windows version) 84

Installing ASM Agent (Linux version) 85

Appendix B: Rack installation 87

System rack installation 89

Equipment rack precautions 89

Vertical mounting hole pattern 91

Screw types for rack installation 92

Installing cage nuts 92

Installing the system into the rack 93

To install the system into the rack: 93

Appendix C: SATA RAID configuration utility 97

Hardware Requirements for R310 SATA RAID 99

SATA RAID POST information 99

Server BIOS settings 100

Using the Adaptec RAID configuration utility 101

Create and Manage RAID 0 104

Disk Utilities 110

Index 111

BB!S421!.!FO/cppl!!Qbhf!jy!!Xfeoftebz-!Nbsdi!35-!3115!!6 1:!QN

BB!S421!.!FO/cppl!!Qbhf!y!!Xfeoftebz-!Nbsdi!35-!3115!!6 1:!QN

Andere Handbücher für Altos R310

Inhaltsverzeichnis

Andere Acer Server Handbücher

Acer

Acer AT350 F2 Series Bedienungsanleitung

Acer

Acer AR385 F1 Bedienungsanleitung

Acer

Acer AR320 F1 Series Bedienungsanleitung

Acer

Acer M9N System Bedienungsanleitung

Acer

Acer Altos easyStore M2 Bedienungsanleitung

Acer

Acer Altos G540 M2 Series Bedienungsanleitung

Acer

Acer Altos S300 Bedienungsanleitung

Acer

Acer Altos R700 Series Bedienungsanleitung

Acer

Acer AR320 Bedienungsanleitung

Acer

Acer Altos R920 Series Bedienungsanleitung

Acer

Acer AR380 F1 Series Bedienungsanleitung

Acer

Acer AT350 F2 Series Bedienungsanleitung

Acer

Acer Altos 350 Bedienungsanleitung

Acer

Acer Altos 900 Bedienungsanleitung

Acer

Acer Altos R510 Bedienungsanleitung

Acer

Acer AR360 F1 Series Bedienungsanleitung

Acer

Acer ALTOS R910 Series Bedienungsanleitung

Acer

Acer AT350 F1 Series Bedienungsanleitung

Acer

Acer Altos R500 Bedienungsanleitung

Acer

Acer Altos R360 F2 Bedienungsanleitung

Acer

Acer AR160 F1 Series Bedienungsanleitung

Acer

Acer ALTOS R910 Series Bedienungsanleitung

Acer

Acer Altos G330 MK2 Series Bedienungsanleitung

Acer

Acer AR585 F1 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung