Acer Altos R700 Series Bedienungsanleitung

Altos R700 Series

User’s guide

BS811.f/cppl!!Qbhf!j!!Uvftebz-!Opwfncfs!37-!3113!!21;19!BN

Changes may be made periodically to the information in this publication without obligation

to notify any person of such revision or changes. Such changes will be incorporated in new

editions of this manual or supplementary documents and publications. This company makes

no representations or warranties, either expressed or implied, with respect to the contents

hereof and specifically disclaims the implied warranties of merchantability or fitness for a

particular purpose.

Record the model number, serial number, purchase date, and place of purchase information in

the space provided below. The serial number and model number are recorded on the label

affixed to your computer. All correspondense concerning your unit should include the serial

number, model number, and purchase information.

No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in

any form or by any means, electronic, mechanical, photocopy, recording, or otherwise,

without the prior written permission of Acer Incorporated.

Model Number : _________________________________

Serial Number: ___________________________________

Purchase Date: ___________________________________

Place of Purchase: ________________________________

Altos R700 Server Board

User’s guide

Original issue: December 2002

Acer and the Acer logo are registered trademarks of Acer Inc. Other company’s product

names or trademarks are used herein for identification purposes only and belong to their

respective companies.

BS811.f/cppl!!Qbhf!jj!!Uvftebz-!Opwfncfs!37-!3113!!21;19!BN

iii

Notices

FCC notice

Class A devices do not have an FCC logo or FCC IDE on the label. Class B devices

have an FCC logo or FCC IDE on the label. Once the class of the device is

determined, refer to the following corresponding statement.

Class A equipment

This device has been tested and found to comply with the limits for a Class A

digital device pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference when the

equipment is operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy, and if not installed

and used in accordance with the instructions, may cause harmful interference to

radio communications. Operation of this equipment in a residential area is

likely to cause harmful interference, in which case the user will be required to

correct the interference at personal expense.

Class B equipment

This device has been tested and found to comply with the limits for a Class B

digital device pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential

installation. This device generates, uses, and can radiate radio frequency

energy, and if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this device does cause harmful interference to radio or television

reception, which can be determined by turning the device off and on, the user

is encouraged to try to correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the device and receiver

• Connect the device into an outlet on a circuit different from that to which

the receiver is connected

• Consult the dealer or an experienced radio/television technician for help

BS811.f/cppl!!Qbhf!jjj!!Uvftebz-!Opwfncfs!37-!3113!!21;19!BN

Notice: Shield cables

All connections to other computing devices must be made using shielded cables

to maintain compliance with FCC regulations.

Notice: Peripheral devices

Only peripherals (input/output devices, terminals, printers, etc.) certified to

comply with the Class A or Class B limits may be attached to this equipment.

Operation with noncertified peripherals is likely to result in interference to

radio and TV reception.

Caution! Changes or modifications not expressly approved by

the manufacturer could void the user’s authority, which is granted

by the Federal Communications Commission, to operate this

server.

Use conditions

This part complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) this device may not cause harmful interference,

and (2) this device must accept any interference received, including interference

that may cause undesired operation.

Notice: Canadian users

This Class A/Class B digital apparatus meets all requirements of the Canadian

Interference-Causing Equipment Regulations.

BS811.f/cppl!!Qbhf!jw!!Uvftebz-!Opwfncfs!37-!3113!!21;19!BN

Important safety instructions

Read these instructions carefully. Save these instructions for future reference.

1 Follow all warnings and instructions marked on the product.

2 Unplug this product from the wall outlet before cleaning. Do not use

liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

3 Do not use this product near water.

4 Do not place this product on an unstable cart, stand, or table. The product

may fall, causing serious damage to the product.

5 Slots and openings on the back or bottom side of the chassis are provided

for ventilation; to ensure reliable operation of the product and to protect

it from overheating, these openings must not be blocked or covered. The

openings should never be blocked by placing the product on a bed, sofa,

rug, or other similar surface. This product should never be placed near or

over a radiator or heat register, or in a built-in installation unless proper

ventilation is provided.

6 This product should be operated from the type of power indicated on the

marking label. If you are not sure of the type of power available, consult

your dealer or local power company.

7 Do not allow anything to rest on the power cord. Do not locate this

product where persons will walk on the cord.

8 If an extension cord is used with this product, make sure that the total

ampere rating of the equipment plugged into the extension cord does not

exceed the extension cord ampere rating. Also, make sure that the total

rating of all products plugged into the wall outlet does not exceed the fuse

rating.

9 Never push objects of any kind into this product through chassis slots as

they may touch dangerous voltage points or short out parts that could

result in a fire or electric shock. Never spill liquid of any kind on the

product.

10 Do not attempt to service this product yourself, as opening or removing

covers may expose you to dangerous voltage points or other risks. Refer all

servicing to qualified service personnel.

11 Unplug this product from the wall outlet and refer servicing to qualified

service personnel under the following conditions:

a When the power cord or plug is damaged or frayed

b If liquid has been spilled into the product

c If the product has been exposed to rain or water

BS811.f/cppl!!Qbhf!w!!Uvftebz-!Opwfncfs!37-!3113!!21;19!BN

d If the product does not operate normally when the operating

instructions are followed. Adjust only those controls that are covered

by the operating instructions since improper adjustment of other

controls may result in damage and will often require extensive work

by a qualified technician to restore the product to normal condition.

e If the product has been dropped or the cabinet has been damaged

f If the product exhibits a distinct change in performance, indicating a

need for service.

12 Replace the battery with the same type as the product's battery we

recommend. Use of another battery may present a risk of fire or explosion.

Refer battery replacement to a qualified service technician.

13 Warning! Batteries may explode if not handled properly. Do not

disassemble or dispose of them in fire. Keep them away from children and

dispose of used batteries promptly.

14 Use only the proper type of power supply cord set (provided in your

accessories box) for this unit. It should be a detachable type: UL listed/CSA

certified, type SPT-2, rated 7A 125V minimum, VDE approved or its

equivalent. Maximum length is 15 feet (4.6 meters).

BS811.f/cppl!!Qbhf!wj!!Uvftebz-!Opwfncfs!37-!3113!!21;19!BN

vii

Notices iii

FCC notice iii

Important safety instructions v

1 Description 1

Server Board Features 2

Server Board Connector and

Component Locations 3

Back Panel Connectors 5

Processor 7

Memory 8

PCI Riser Slots 9

Video 10

SCSI Controller 11

Network Controller 12

NIC Connector and Status LEDs 12

System Cooling 13

Keyboard and Mouse 14

RJ-45 Serial Port 15

ACPI 17

System Management 18

Baseboard Management Controller 18

Field Replaceable Units and Sensor Data Records 18

System Event Log 19

Platform Event Management 19

Emergency Management Port 20

Acer Advance Server Management (ASMe) 21

Security 22

Intrusion Switch Monitoring 22

Software Locks 22

Using Passwords 22

Secure Mode 23

Summary of Software

Security Features 24

2 Installation Procedures 27

Rearrange the Standoffs 28

Install the Server Board 29

Install the Processor Retention Brackets 30

Installing Processors 31

Memory 34

Connect Cables 35

Installing a Service Partition on the Server (Optional) 36

BS811.f/cppl!!Qbhf!wjj!!Uvftebz-!Opwfncfs!37-!3113!!21;19!BN

viii

Installing your Operating System 36

Installing Acer Advance Server Management 36

3 Upgrading 39

Tools and Supplies Needed 40

Cautions 41

Replacing the Back up Battery 43

4 Configuration Software and Utilities 45

Service Partition (Optional) 47

Configuration Utilities 48

System Software Update Sequence 48

Hot Keys 50

Power-On Self-Test (POST) 51

BIOS Setup 52

If BIOS Setup Is Inaccessible 52

Temporarily Changing the Boot Device Priority 52

Running the Adaptec SCSISelect Utility 54

When to Run the Adaptec SCSISelect Utility 54

Running the SCSISelect Utility 54

Configuring the Adaptec SCSI Adapter 55

Direct Platform Control (DPC) Console 57

DPC Console Modes of Operation 57

Running the DPC Console 58

Using the System Setup Utility 59

Creating SSU Diskettes 59

Running the SSU 60

Setting Boot Device Priority 62

Setting Passwords and Security Options 62

Viewing the System Event Log 63

Viewing FRU Information 64

Viewing Sensor Data Records 65

Updating System Firmware and BIOS 65

Saving and Restoring the System Configuration 67

Alerting for Platform Events 68

Managing the Server Remotely 71

Software Updates 74

Creating a Bootable Diskette 74

Software Update Package 74

Recovering the BIOS 75

Firmware Update Utility Description 76

Running the Firmware Update Utility 76

FRU/SDR Load Utility Description 76

BS811.f/cppl!!Qbhf!wjjj!!Uvftebz-!Opwfncfs!37-!3113!!21;19!BN

5 Solving Problems 81

Resetting the System 82

Initial System Startup 83

Checklist 83

Running New Application Software 85

Checklist 85

After the System Has Been

Running Correctly 86

Checklist 86

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung