Acer Altos R300 Bedienungsanleitung

Altos R300

User’s guide

aa r300.book Page i Tuesday, March 4, 2003 9:39 AM

Changes may be made periodically to the information in this publication without obligation

to notify any person of such revision or changes. Such changes will be incorporated in new

editions of this manual or supplementary documents and publications. This company makes

no representations or warranties, either expressed or implied, with respect to the contents

hereof and specifically disclaims the implied warranties of merchantability or fitness for a

particular purpose.

Record the model number, serial number, purchase date, and place of purchase information in

the space provided below. The serial number and model number are recorded on the label

affixed to your computer. All correspondense concerning your unit should include the serial

number, model number, and purchase information.

No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in

any form or by any means, electronic, mechanical, photocopy, recording, or otherwise,

without the prior written permission of Acer Incorporated.

Model Number : _________________________________

Serial Number: ___________________________________

Purchase Date: ___________________________________

Place of Purchase: ________________________________

Altos R300

User’s guide

Acer and the Acer Logo are registered trademarks of Acer Inc. Other company’s product

names or trademarks are used herein for identification purposes only and belong to their

respective companies.

aa r300.book Page ii Tuesday, March 4, 2003 9:39 AM

iii

Notices

FCC notice

This device has been tested and found to comply with the limits for a Class B

digital device pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential

installation. This device generates, uses, and can radiate radio frequency

energy, and if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this device does cause harmful interference to radio or television

reception, which can be determined by turning the device off and on, the user

is encouraged to try to correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the device and receiver

• Connect the device into an outlet on a circuit different from that to which

the receiver is connected

• Consult the dealer or an experienced radio/television technician for help

Notice: Shield cables

All connections to other computing devices must be made using shielded cables

to maintain compliance with FCC regulations.

Notice: Peripheral devices

Only peripherals (input/output devices, terminals, printers, etc.) certified to

comply with the Class B limits may be attached to this equipment. Operation

with noncertified peripherals is likely to result in interference to radio and TV

reception.

Caution! Changes or modifications not expressly approved by the

manufacturer could void the user’s authority, which is granted by

the Federal Communications Commission, to operate this system.

aa r300.book Page iii Tuesday, March 4, 2003 9:39 AM

Use conditions

This part complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) this device may not cause harmful interference,

and (2) this device must accept any interference received, including interference

that may cause undesired operation.

Notice: Canadian users

This Class B digital apparatus meets all requirements of the Canadian

Interference-Causing Equipment Regulations.

Remarque à l’intention des utilisateurs canadiens

Cet appareil numérique de la classe B respected toutes les exigences du

Règlement sur le matériel brouilleur du Canada.

aa r300.book Page iv Tuesday, March 4, 2003 9:39 AM

Important safety information

Checking the power cords

Warning! To avoid electrical shock, do not attempt to

modify or use the supplied AC power cord(s), if they are

not the exact type required.

If a power cord(s) supplied is not compatible with the AC wall outlet in your

region, get one that meets the following criteria:

• The power cord must be properly rated for the AC voltage in your region.

• The power cord plug cap must have an electrical current rating that is at

least 125% of the electrical current rating of the product.

• The power cord plug cap that plugs into the wall socket-outlet must have a

grounding-type male plug designed for use in your region.

• The power cord must have safety certifications for your region, and shall

be marked with the certification markings.

• The power supply cord(s) is the main disconnect device to AC power. The

socket outlet(s) shall be near the equipment and shall be readily accessible

for disconnection.

Multiple power cords

Warning! To avoid electrical shock, disconnect all AC power cords before

accessing system internals.

Earth grounded socket outlets

Warning! To avoid electrical shock, the system power cord(s) must be plugged

into socket-outlet(s) that is/are provided with a suitable earth ground.

aa r300.book Page v Tuesday, March 4, 2003 9:39 AM

Precautionary reminders

• Power supply modules

Power supply modules have double-pole/neutral fusing.

• Ventilation considerations

The equipment rack must provide sufficient airflow to the front of the

system to maintain proper cooling. The rack selected and the ventilation

provided must be suitable to the environment in which the system will be

used.

•Fans

To avoid injury do not touch moving fan blades.

• Cooling and airflow

For proper cooling and airflow, always install all access covers before

turning on the system. Operating the system for longer than five minutes

without the covers in place can cause overheating and damage to system

components.

• Temperature limits

The operating temperature of the system, when installed in the rack, must

not go below 10°C (50°F) or rise above 35°C (95°F). Extreme fluctuations in

temperature may cause a variety of system problems, and safety limits may

be broken.

• Lifting and Moving

Do not attempt to lift or move the system by the handles on the power

supplies.

• System covers

The system cover is an integral part of this product. If you need to open

your system to install new components, always remember to reinstall the

system cover before turning on the system.

aa r300.book Page vi Tuesday, March 4, 2003 9:39 AM

vii

Important safety instructions

Read these instructions carefully. Save these instructions for future reference.

1 Follow all warnings and instructions marked on the product.

2 Unplug this product from the wall outlet before cleaning. Do not use

liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

3 Do not use this product near water.

4 Do not place this product on an unstable cart, stand, or table. The product

may fall, causing serious damage to the product.

5 Slots and openings in the housing and the back or bottom are provided for

ventilation; to ensure reliable operation of the product and to protect it

from overheating, these openings must not be blocked or covered. The

openings should never be blocked by placing the product on a bed, sofa,

rug, or other similar surface. This product should never be placed near or

over a radiator or heat register, or in a built-in installation unless proper

ventilation is provided.

6 This product should be operated from the type of power indicated on the

marking label. If you are not sure of the type of power available, consult

your dealer or local power company.

7 Do not allow anything to rest on the power cord. Do not locate this

product where persons will walk on the cord.

8 If an extension cord is used with this product, make sure that the total

ampere rating of the equipment plugged into the extension cord does not

exceed the extension cord ampere rating. Also, make sure that the total

rating of all products plugged into the wall outlet does not exceed the fuse

rating.

9 Never push objects of any kind into this product through cabinet slots as

they may touch dangerous voltage points or short out parts that could

result in a fire or electric shock. Never spill liquid of any kind on the

product.

10 Do not attempt to service this product yourself, as opening or removing

covers may expose you to dangerous voltage points or other risks. Refer all

servicing to qualified service personnel.

11 Unplug this product from the wall outlet and refer servicing to qualified

service personnel under the following conditions:

a When the power cord or plug is damaged or frayed

b If liquid has been spilled into the product

c If the product has been exposed to rain or water

aa r300.book Page vii Tuesday, March 4, 2003 9:39 AM

viii

d If the product does not operate normally when the operating

instructions are followed. Adjust only those controls that are covered

by the operating instructions since improper adjustment of other

controls may result in damage and will often require extensive work

by a qualified service personnel to restore the product to normal

condition.

e If the product has been dropped or the cabinet has been damaged

f If the product exhibits a distinct change in performance, indicating a

need for service.

12 Replace the battery with the same type as the product's battery we

recommend. Use of another battery may present a risk of fire or explosion.

Refer battery replacement to a qualified service personnel.

13 Warning! Batteries may explode if not handled properly. Do not

disassemble or dispose of them in fire. Keep them away from children and

dispose of used batteries promptly.

14 Use only the proper type of power supply cord set (provided in your

accessories box) for this unit.

aa r300.book Page viii Tuesday, March 4, 2003 9:39 AM

Important installation instructions

Since Altos R300 is also considered to be rack-mountable, instructions

addressing suitable installation of the equipment in a rack are required to be

supplied by the equipment manufacturer. Through the use of simple statements

in the installation instructions, the following general hazards shall be

addressed. These potential hazards are considered common to most rack

installations:

1 Elevated operating ambient temperature

The details should be provided so that consideration shall be given to

installing the equipment in an environment compatible with the

manufacturer’s maximum rated ambient temperature 35°C (95°F).

2 Reduced air flow

Installation of the equipment in a rack shall be such that the amount of

airflow required for safe operation of the equipment is not compromised.

3 Mechanical loading

Mounting of the equipment in the rack shall be such that a hazardous

condition is not achieved due to uneven mechanical loading.

4 Circuit overloading

Consideration should be given to connection of the equipment to the

supply circuit and the effect that overloading circuits may have on

overcurrent protection and supply wiring. Appropriate consideration of

the equipment nameplate rating should be used when addressing this

concern.

5 Reliable earthing

Reliable earthing of the rack mounted equipment should be maintained.

aa r300.book Page ix Tuesday, March 4, 2003 9:39 AM

Laser compliance statement

The CD-ROM drive in this system is a laser product. The CD-ROM drive’s

classification label (shown below) is located on the drive.

CLASS 1 LASER PRODUCT

CAUTION: INVISIBLE LASER RADIATION WHEN OPEN. AVOID EXPOSURE TO

BEAM.

aa r300.book Page x Tuesday, March 4, 2003 9:39 AM

Inhaltsverzeichnis

Andere Acer Server Handbücher

Acer

Acer ALTOS R910 Series Bedienungsanleitung

Acer

Acer Extensa 500 Stücklistenhandbuch

Acer

Acer HDS WMS100 Bedienungsanleitung

Acer

Acer Altos R310 Bedienungsanleitung

Acer

Acer Altos G5350 Bedienungsanleitung

Acer

Acer Altos R700 Series Bedienungsanleitung

Acer

Acer AR360 F1 Series Bedienungsanleitung

Acer

Acer HDS AMS200 Bedienungsanleitung

Acer

Acer AC100 Bedienungsanleitung

Acer

Acer Altos G300 Bedienungsanleitung

Acer

Acer Altos G500 Bedienungsanleitung

Acer

Acer Altos T350 F2 Installationsanleitung

Acer

Acer AT350 F1 Series Bedienungsanleitung

Acer

Acer AB2x280 F1 Bedienungsanleitung

Acer

Acer AR360 F2 Bedienungsanleitung

Acer

Acer AR585 F1 Bedienungsanleitung

Acer

Acer AR320 F1 Series Bedienungsanleitung

Acer

Acer R310-U-P3200 - Altos - R310 Bedienungsanleitung

Acer

Acer Altos 1200LP Bedienungsanleitung

Acer

Acer Altos G701 Bedienungsanleitung

Acer

Acer Altos G330 MK2 Series Bedienungsanleitung

Acer

Acer Veriton 9100 Bedienungsanleitung

Acer

Acer AR320 Bedienungsanleitung

Acer

Acer 930 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung