Acer Altos R700 Series Bedienungsanleitung

Altos R700

Chassis Subassembly

Product guide

AR700-e.book Page i Tuesday, September 10, 2002 2:31 PM

Changes may be made periodically to the information in this publication without obligation

to notify any person of such revision or changes. Such changes will be incorporated in new

editions of this manual or supplementary documents and publications. This company makes

no representations or warranties, either expressed or implied, with respect to the contents

hereof and specifically disclaims the implied warranties of merchantability or fitness for a

particular purpose.

Record the model number, serial number, purchase date, and place of purchase information in

the space provided below. The serial number and model number are recorded on the label

affixed to your computer. All correspondense concerning your unit should include the serial

number, model number, and purchase information.

No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in

any form or by any means, electronic, mechanical, photocopy, recording, or otherwise,

without the prior written permission of Acer Incorporated.

Model Number : _________________________________

Serial Number: ___________________________________

Purchase Date: ___________________________________

Place of Purchase: ________________________________

Altos R700 Chassis Subassembly

Product guide

Acer and the Acer logo are registered trademarks of Acer Inc. Other company’s product

names or trademarks are used herein for identification purposes only and belong to their

respective companies.

AR700-e.book Page ii Tuesday, September 10, 2002 2:31 PM

iii

Notices

FCC notice

Class A devices do not have an FCC logo or FCC IDE on the label. Class B devices

have an FCC logo or FCC IDE on the label. Once the class of the device is

determined, refer to the following corresponding statement.

Class A equipment

This device has been tested and found to comply with the limits for a Class A

digital device pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference when the

equipment is operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy, and if not installed

and used in accordance with the instructions, may cause harmful interference to

radio communications. Operation of this equipment in a residential area is

likely to cause harmful interference, in which case the user will be required to

correct the interference at personal expense.

Class B equipment

This device has been tested and found to comply with the limits for a Class B

digital device pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential

installation. This device generates, uses, and can radiate radio frequency

energy, and if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this device does cause harmful interference to radio or television

reception, which can be determined by turning the device off and on, the user

is encouraged to try to correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the device and receiver

• Connect the device into an outlet on a circuit different from that to which

the receiver is connected

• Consult the dealer or an experienced radio/television technician for help

AR700-e.book Page iii Tuesday, September 10, 2002 2:31 PM

Notice: Shield cables

All connections to other computing devices must be made using shielded cables

to maintain compliance with FCC regulations.

Notice: Peripheral devices

Only peripherals (input/output devices, terminals, printers, etc.) certified to

comply with the Class A or Class B limits may be attached to this equipment.

Operation with noncertified peripherals is likely to result in interference to

radio and TV reception.

Caution! Changes or modifications not expressly approved by

the manufacturer could void the user’s authority, which is granted

by the Federal Communications Commission, to operate this

server.

Use conditions

This part complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) this device may not cause harmful interference,

and (2) this device must accept any interference received, including interference

that may cause undesired operation.

Notice: Canadian users

This Class A/Class B digital apparatus meets all requirements of the Canadian

Interference-Causing Equipment Regulations.

AR700-e.book Page iv Tuesday, September 10, 2002 2:31 PM

Important safety instructions

Read these instructions carefully. Save these instructions for future reference.

1 Follow all warnings and instructions marked on the product.

2 Unplug this product from the wall outlet before cleaning. Do not use

liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

3 Do not use this product near water.

4 Do not place this product on an unstable cart, stand, or table. The product

may fall, causing serious damage to the product.

5 Slots and openings on the back or bottom side of the chassis are provided

for ventilation; to ensure reliable operation of the product and to protect

it from overheating, these openings must not be blocked or covered. The

openings should never be blocked by placing the product on a bed, sofa,

rug, or other similar surface. This product should never be placed near or

over a radiator or heat register, or in a built-in installation unless proper

ventilation is provided.

6 This product should be operated from the type of power indicated on the

marking label. If you are not sure of the type of power available, consult

your dealer or local power company.

7 Do not allow anything to rest on the power cord. Do not locate this

product where persons will walk on the cord.

8 If an extension cord is used with this product, make sure that the total

ampere rating of the equipment plugged into the extension cord does not

exceed the extension cord ampere rating. Also, make sure that the total

rating of all products plugged into the wall outlet does not exceed the fuse

rating.

9 Never push objects of any kind into this product through chassis slots as

they may touch dangerous voltage points or short out parts that could

result in a fire or electric shock. Never spill liquid of any kind on the

product.

10 Do not attempt to service this product yourself, as opening or removing

covers may expose you to dangerous voltage points or other risks. Refer all

servicing to qualified service personnel.

11 Unplug this product from the wall outlet and refer servicing to qualified

service personnel under the following conditions:

a When the power cord or plug is damaged or frayed

b If liquid has been spilled into the product

c If the product has been exposed to rain or water

AR700-e.book Page v Tuesday, September 10, 2002 2:31 PM

d If the product does not operate normally when the operating

instructions are followed. Adjust only those controls that are covered

by the operating instructions since improper adjustment of other

controls may result in damage and will often require extensive work

by a qualified technician to restore the product to normal condition.

e If the product has been dropped or the cabinet has been damaged

f If the product exhibits a distinct change in performance, indicating a

need for service.

12 Replace the battery with the same type as the product's battery we

recommend. Use of another battery may present a risk of fire or explosion.

Refer battery replacement to a qualified service technician.

13 Warning! Batteries may explode if not handled properly. Do not

disassemble or dispose of them in fire. Keep them away from children and

dispose of used batteries promptly.

14 Use only the proper type of power supply cord set (provided in your

accessories box) for this unit. It should be a detachable type: UL listed/CSA

certified, type SPT-2, rated 7A 125V minimum, VDE approved or its

equivalent. Maximum length is 15 feet (4.6 meters).

AR700-e.book Page vi Tuesday, September 10, 2002 2:31 PM

Contents

Notices iii

FCC notice iii

Important safety instructions v

1 Chassis Description 1

What Your Kit Includes 2

Items You Must Purchase Separately 3

Feature Summary 4

System Components 4

Chassis Front Panel and Peripheral Bays 5

Chassis Back I/O Ports and Features 6

Front Panel Controls and Indicators 7

Peripherals 11

500 Watt Redundant Power Supply 12

System Cooling 12

Chassis Security 13

2 Assembling the System 15

Before You Begin 17

Supplies Needed 17

Installation/Assembly Safety Instructions 18

Use Only for Intended Applications 18

Checking the Power Cord 19

Warnings and Cautions 19

Installing System Components 21

Remove the Cover 21

Remove the Processor Air Duct 22

Remove the Riser Cards 22

Remove the Fan module 23

Install the Server Board 24

Routing Cables 27

Installing Peripherals 35

Installing a PCI Card on a Riser Card 35

Installing the Riser Cards on the Server Board 36

Installing a Hard Drive 37

Installing a DVD drive/FDD or

CD-ROM drive/FDD Module 39

Finishing Installation 41

Installing a Serial A port in the Rear I/O 41

Install the Cover 41

Installing the Power Cord and Strain Relief Strap 41

Install the Bezel 42

AR700-e.book Page vii Tuesday, September 10, 2002 2:31 PM

3 Installing the System in a Rack 43

Equipment Rack Precautions 44

4 Working Inside Your Server 47

Tools and Supplies Needed 48

Safety: Before You Remove the Cover 48

Warnings and Cautions 49

Lithium Battery Replacement 49

Replacing Components 51

Replacing a Hard Drive 51

Replacing a DVD/CD-ROM drive/FDD Module 52

Replacing a PCI Add-in Card 54

Replacing a 500 Watt Power Supply Module 56

Replacing a Power Supply Cage 57

Installing a Redundant Fan 59

Replacing the Fan Module 61

Replacing a Backplane Board 62

Replacing a Front Panel Board 63

Replacing a Server Board 64

Appendix A: Equipment Log and Worksheets 67

Equipment Log 68

Current Usage 70

Calculating Power Usage 70

Worksheet, Calculating DC Power Usage 70

Worksheet, Total Combined Power

Used by the System 72

AR700-e.book Page viii Tuesday, September 10, 2002 2:31 PM

1Chassis

Description

AR700-e.book Page 1 Tuesday, September 10, 2002 2:31 PM

1 Chassis Description

What Your Kit Includes

Your Altos R700 server chassis kit is designed to support the Altos

R700 Server Board. The fan module and riser cards are installed

for shipment, but you must remove and reinstall them when you

install the server board.

Your kit includes the following components:

• 2U rack-mount chassis featuring:

• Four hard drive bays with carriers and two bays with plugs

• Two hard drive bay plugs

• One bay for an optional DVD/CD-ROM drive/FDD module (comes

with filler panel and plug)

• One bay for optional tape drive (comes with carrier and filler

panel)

• One 480 W SSI PFC non-redundant power supply or a 500 W 1+0

SSI PFC redundant power supply with one module and one blank

• Two PCI riser cards for use with the Altos R700 Server Board

• Three system fans

• One internal USB cable, (connecting server board to front panel

board)

• One internal flex circuit cable, 100-pin (connecting server board to

backplane board)

• One internal SCSI cable (connecting server board to backplane

board)

• One internal front panel cable, 34-pin (connecting front panel

board to backplane board)

• One Resource CD-ROM containing drivers, utilities, and product

guide

• Mounting screws (server board)

• Front, mid, or 4-post rack mounting kit

AR700-e.book Page 2 Tuesday, September 10, 2002 2:31 PM

Andere Handbücher für Altos R700 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Acer Server Handbücher

Acer

Acer AR320 F1 Series Bedienungsanleitung

Acer

Acer Altos R710 Bedienungsanleitung

Acer

Acer ALTOS R910 Series Bedienungsanleitung

Acer

Acer AR585 F1 Bedienungsanleitung

Acer

Acer AR380 F1 Series Bedienungsanleitung

Acer

Acer Altos RM900 Bedienungsanleitung

Acer

Acer AC100 Bedienungsanleitung

Acer

Acer AcerAltos 21000 Stücklistenhandbuch

Acer

Acer Network Device Altos R520 Bedienungsanleitung

Acer

Acer Veriton 9100 Stücklistenhandbuch

Acer

Acer AR360 F2 Bedienungsanleitung

Acer

Acer Altos G540 M2 Series Bedienungsanleitung

Acer

Acer Altos G701 Bedienungsanleitung

Acer

Acer M9N System Bedienungsanleitung

Acer

Acer 700id Bedienungsanleitung

Acer

Acer HDS AMS200 Bedienungsanleitung

Acer

Acer Altos G5450 Series Bedienungsanleitung

Acer

Acer Ferrari 1100 Series Bedienungsanleitung

Acer

Acer AB460 F1 Bedienungsanleitung

Acer

Acer Altos R480 F4 Bedienungsanleitung

Acer

Acer Altos G300 Bedienungsanleitung

Acer

Acer Altos G520 series Bedienungsanleitung

Acer

Acer AT350 F2 Series Bedienungsanleitung

Acer

Acer Altos R310 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung