Acer AT310 F1 Series Bedienungsanleitung

AT310 F1 Series

User Guide

Model Number:

Serial Number:

Purchase Date:

Place of Purchase:

Acer AT310 F1 Series

User Guide

Acer AT310 F1

iii

Information for your safety and

comfort

Safety instructions

Read these instructions carefully. Keep this document for future reference.

Follow all warnings and instructions marked on the product.

Turning the product off before cleaning

Unplug this product from the wall outlet before cleaning. Do not use liquid

cleaners or aerosol cleaners. Use a damp cloth for cleaning.

CAUTION for power cord

Observe the following guidelines when connecting and disconnecting power to

the power supply unit:

• Install the power supply unit before connecting the power cord to the AC

power outlet.

• Unplug the power cord before removing the power supply unit from the

computer.

• If the system has multiple sources of power, disconnect power from the

system by unplugging all power cords from the power supplies.

CAUTION for accessibility

Be sure that the power outlet you plug the power cord into is easily accessible

and located as close to the equipment operator as possible. When you need to

disconnect power to the equipment, be sure to unplug the power cord from the

electrical outlet.

Warnings

• Place this product in the upright position and not on its side.

• Do not use this product near water.

• Do not place this product on an unstable cart, stand or table. If the product

falls, it could be seriously damaged.

• Slots and openings are provided for ventilation to ensure reliable

operation of the product and to protect it from overheating. These

openings must not be blocked or covered. The openings should never be

blocked by placing the product on a bed, sofa, rug or other similar surface.

This product should never be placed near or over a radiator or heat

• Never push objects of any kind into this product through cabinet slots as

they may touch dangerous voltage points or short-out parts that could

result in a fire or electric shock. Never spill liquid of any kind onto or into

the product.

• To avoid damage of internal components and to prevent battery leakage,

do not place the product on a vibrating surface.

• Never use it under sporting, exercising, or any vibrating environment

which will probably cause unexpected short current or damage rotor

devices, HDD, Optical drive, and even exposure risk from lithium battery

pack.

Using electrical power

• This product should be operated from the type of power indicated on the

marking label. If you are not sure of the type of power available, consult

your dealer or local power company.

• Do not allow anything to rest on the power cord. Do not locate this

product where people will walk on the cord.

• If an extension cord is used with this product, make sure that the total

ampere rating of the equipment plugged into the extension cord does not

exceed the extension cord ampere rating. Also, make sure that the total

rating of all products plugged into the wall outlet does not exceed the fuse

rating.

• Do not overload a power outlet, strip or receptacle by plugging in too

many devices. The overall system load must not exceed 80% of the branch

circuit rating. If power strips are used, the load should not exceed 80% of

the power strip's input rating.

• This product's power supply is equipped with a three-wire grounded plug.

The plug only fits in a grounded power outlet. Make sure the power outlet

is properly grounded before inserting the power supply plug. Do not insert

the plug into a non-grounded power outlet. Contact your electrician for

details.

Warning! The grounding pin is a safety feature. Using a power outlet that is

not properly grounded may result in electric shock and/or injury.

Note: The grounding pin also provides good protection from unexpected

noise produced by other nearby electrical devices that may interfere with

the performance of this product.

• Use the product only with the supplied power supply cord set. If you need

to replace the power cord set, make sure that the new power cord meets

the following requirements: detachable type, UL listed/CSA certified, VDE

approved or its equivalent, 4.6 meters (15 feet) maximum length.

Product servicing

Do not attempt to service this product yourself, as opening or removing covers

may expose you to dangerous voltage points or other risks. Refer all servicing to

qualified service personnel.

Unplug this product from the wall outlet and refer servicing to qualified service

personnel when:

• The power cord or plug is damaged, cut or frayed.

• Liquid was spilled into the product.

• The product was exposed to rain or water.

• The product has been dropped or the case has been damaged.

• The product exhibits a distinct change in performance, indicating a need

for service.

• The product does not operate normally after following the operating

instructions.

Note: Adjust only those controls that are covered by the operating

instructions, since improper adjustment of other controls may result in

damage and will often require extensive work by a qualified technician to

restore the product to normal condition.

CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only

with the same or equivalent type recommended by the manufacturer. Dispose

of used batteries according to the manufacturer’s instructions.

Additional safety information

Your device and its enhancements may contain small parts. Keep them out of

the reach of small children.

Disposal instructions

Do not throw this electronic device into the trash when

discarding. To minimize pollution and ensure utmost protection

of the global environment, please recycle. For more

information on the Waste from Electrical and Electronics

Equipment (WEEE) regulations, visit

www.acer-group.com/public/Sustainability/sustainability01.htm.

Mercury advisory

For projectors or electronic products containing an LCD/CRT

monitor or display: Lamp(s) inside this product contain mercury and

must be recycled or disposed of according to local, state or federal

laws. For more information, contact the Electronic Industries Alliance at

www.eiae.org. For lamp-specific disposal information, check

www.lamprecycle.org.

Tips and information for comfortable use

Computer users may complain of eyestrain and headaches after prolonged use.

Users are also at risk of physical injury after long hours of working in front of a

computer. Long work periods, bad posture, poor work habits, stress,

inadequate working conditions, personal health and other factors greatly

increase the risk of physical injury.

Incorrect computer usage may lead to carpal tunnel syndrome, tendonitis,

tenosynovitis or other musculoskeletal disorders. The following symptoms may

appear in the hands, wrists, arms, shoulders, neck or back:

• numbness, or a burning or tingling sensation

• aching, soreness or tenderness

• pain, swelling or throbbing

• stiffness or tightness

• coldness or weakness

If you have these symptoms, or any other recurring or persistent discomfort

and/or pain related to computer use, consult a physician immediately and

inform your company's health and safety department.

The following section provides tips for more comfortable computer use.

vii

Finding your comfort zone

Find your comfort zone by adjusting the viewing angle of the monitor, using a

footrest, or raising your sitting height to achieve maximum comfort. Observe

the following tips:

• Refrain from staying too long in one fixed posture.

• Avoid slouching forward and/or leaning backward.

• Stand up and walk around regularly to remove the strain on your leg

muscles.

• Take short rests to relax your neck and shoulders.

• Avoid tensing your muscles or shrugging your shoulders.

• Install the external display, keyboard and mouse properly and within

comfortable reach.

• If you view your monitor more than your documents, place the display at

the center of your desk to minimize neck strain.

Taking care of your vision

Long viewing hours, wearing incorrect glasses or contact lenses, glare, excessive

room lighting, poorly focused screens, very small typefaces and low-contrast

displays could stress your eyes. The following sections provide suggestions on

how to reduce eyestrain.

Eyes

• Rest your eyes frequently.

• Give your eyes regular breaks by looking away from the monitor and

focusing on a distant point.

• Blink frequently to keep your eyes from drying out.

Display

• Keep your display clean.

• Keep your head at a higher level than the top edge of the display so your

eyes point downward when looking at the middle of the display.

• Adjust the display brightness and/or contrast to a comfortable level for

enhanced text readability and graphics clarity.

• Eliminate glare and reflections by:

• Placing your display in such a way that the side faces the window or

any light source.

• Minimizing room light by using drapes, shades or blinds.

• Using a task light.

• Changing the display's viewing angle.

viii

• Using a glare-reduction filter.

• Using a display visor, such as a piece of cardboard extended from the

display's top front edge.

• Avoid adjusting your display to an awkward viewing angle.

• Avoid looking at bright light sources, such as open windows, for extended

periods of time.

Developing good work habits

Develop the following work habits to make your computer use more relaxing

and productive:

• Take short breaks regularly and often.

• Perform some stretching exercises.

• Breathe fresh air as often as possible.

• Exercise regularly and maintain a healthy body.

Regulations and safety notices

FCC notice

This device has been tested and found to comply with the limits for a Class B

digital device pursuant to Part 15 of the FCC rules. These limits are designed to

provide reasonable protection against harmful interference in a residential

installation. This device generates, uses, and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this device does cause harmful interference to radio or television

reception, which can be determined by turning the device off and on, the user

is encouraged to try to correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the device and receiver.

• Connect the device into an outlet on a circuit different from that to which

the receiver is connected.

• Consult the dealer or an experienced radio/television technician for help.

Notice: Shielded cables

All connections to other computing devices must be made using shielded cables

to maintain compliance with FCC regulations. In compliance with FCC

regulations, use shielded cables to connect to other computing devices. A dual-

link cable is recommended for DVI output.

Notice: Peripheral devices

Only peripherals (input/output devices, terminals, printers, etc.) certified to

comply with the Class B limits may be attached to this equipment. Operation

with non-certified peripherals is likely to result in interference to radio and TV

reception.

Caution

Changes or modifications not expressly approved by the manufacturer could

void the user's authority, which is granted by the Federal Communications

Commission, to operate this computer.

Operation conditions

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) this device may not cause harmful interference,

and (2) this device must accept any interference received, including interference

that may cause undesired operation.

Notice: Canadian users

This Class B digital apparatus complies with Canadian ICES-003.

Remarque à l'intention des utilisateurs canadiens

Cet appareil numérique de la classe B est conforme a la norme NMB-003 du

Canada.

Compliant with Russian regulatory certification

Notice for Australia

For safety reasons, only connect headsets with a

telecommunications compliance label. This includes customer equipment

previously labelled permitted or certified.

Notice for New Zealand

1 The grant of a Telepermit for any item of terminal equipment indicates

only that Telecom has accepted that the item complies with minimum

conditions for connection to its network. It indicates no endorsement of

the product by Telecom, nor does it provide any sort of warranty. Above

all, it provides no assurance that any item will work correctly in all respects

with another item of Telepermitted equipment of a different make or

model, nor does it imply that any product is compatible with all of

Telecom's network services.

2 This equipment is not capable, under all operating conditions, of correct

operation at the higher speeds for which it is designed. Telecom will accept

no responsibility should difficulties arise in such circumstances.

3 Some parameters required for compliance with Telecom's Telepermit

requirements are dependent on the equipment (PC) associated with this

device. The associated equipment shall be set to operate within the

following limits for compliance with Telecom's Specifications:

a There shall be no more than 10 call attempts to the same number

within any 30 minute period for any single manual call initiation, and

b The equipment shall go on-hook for a period of not less than 30

seconds between the end of one attempt and the beginning of the

next call attempt.

Inhaltsverzeichnis

Andere Acer Server Handbücher

Acer

Acer M19A System Bedienungsanleitung

Acer

Acer AR180 F1 Series Bedienungsanleitung

Acer

Acer AR385 F1 Bedienungsanleitung

Acer

Acer Altos T350 F2 Installationsanleitung

Acer

Acer G310 Altos Bedienungsanleitung

Acer

Acer Veriton 9100 Stücklistenhandbuch

Acer

Acer AR360 F1 Series Bedienungsanleitung

Acer

Acer Altos R710 Bedienungsanleitung

Acer

Acer Altos G300 Bedienungsanleitung

Acer

Acer Altos 350 Bedienungsanleitung

Acer

Acer Altos G520 series Bedienungsanleitung

Acer

Acer Altos G320 Series Bedienungsanleitung

Acer

Acer Altos R700 Series Bedienungsanleitung

Acer

Acer AW2000ht-AW170ht F1 Bedienungsanleitung

Acer

Acer AR360 F1 Series Bedienungsanleitung

Acer

Acer AR380 F2 Bedienungsanleitung

Acer

Acer Altos G710 Bedienungsanleitung

Acer

Acer ALTOS R910 Series Bedienungsanleitung

Acer

Acer Altos R710 Bedienungsanleitung

Acer

Acer AB2x280 F1 Bedienungsanleitung

Acer

Acer AR585 F1 Bedienungsanleitung

Acer

Acer Veriton N2110G Bedienungsanleitung

Acer

Acer AR380 F1 Series Bedienungsanleitung

Acer

Acer RC111 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung