Acnodes KDN9172 Bedienungsanleitung

For lastest product information, please visit Acnodes’ website at www.acnodes.com

14628 Central Ave. Chino, CA 91710 Tel: 909.597. 7588 Fax: 909. 597.1939

Legal Information

First English printing, October 2002

Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the

contents. The information in this document is subject to change without notice. We are not liable for any injury or loss that results from

the use of this equipment.

Safety Instructions

Please read all of these instructions carefully before you use the device. Save this manual for future reference.

■Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.

■Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned environment with

temperatures not exceeding 40º Celsius (104º Fahrenheit).

■When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and causing

damage to other equipment or injury to persons nearby.

■When the equipment is in an open position, do not cover, block or in any way obstruct the gap between it and the

power supply. Proper air convection is necessary to keep it from overheating.

■ Arrange the equipment’s power cord in such a way that others won’t trip or fall over it.

■If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the voltage and current

labeled on the equipment’s electrical ratings label. The voltage rating on the cord should be higher than the one listed

on the equipment’s ratings label.

■Observe all precautions and warnings attached to the equipment.

■If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to prevent being

damaged by transient over-voltage.

■Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to the power

supply or on other hardware may cause damage, fire or electrical shock.

■Only qualified service personnel should open the chassis. Opening it yourself could damage the equipment and

invalidate its warranty.

■If any part of the equipment becomes damaged or stops functioning, have it checked by qualified service personnel.

What the warranty does not cover

■ Any product, on which the serial number has been defaced, modified or removed.

■Damage, deterioration or malfunction resulting from:

□Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or

failure to follow instructions supplied with the product.

□Repair or attempted repair by anyone not authorized by us.

□Any damage of the product due to shipment.

□Removal or installation of the product.

□Causes external to the product, such as electric power fluctuation or failure.

□Use of supplies or parts not meeting our specifications.

□Normal wear and tear.

□Any other causes which does not relate to a product defect.

■Removal, installation, and set-up service charges.

Regulatory Notices Federal Communications Commission (FCC)

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC

rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

Any changes or modifications made to this equipment may void the user’s authority to operate this equipment. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged

to try to correct the interference by one or more of the following measures:

■Re-position or relocate the receiving antenna.

■Increase the separation between the equipment and receiver.

■Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Contents

< Part. 1 > KDN9172/9192

1.1 Package Content

1.2 Structure Diagram & Dimension

1.3 Installation

1.4 Connection

P.1

P.1 - 2

P.3

P.4

< Part. 2 > Specifications / OSD

2.1 Product Specifications

2.2 Keyboard / Mouse Specifications

2.3 On-screen Display Operation ( OSD )

P.5 - 6

P.7

P.8 - 9

< Part. 3 > Options

3.1 HDMI, DVI-D, S-Video + BNC & Audio

3.2 48V, 24V or 12VDC power P.10

P.11

Before Installation

■It is very important to mount the equipment in a suitable cabinet or on a stable surface.

■Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive

dust, dirt, heat, water, moisture and vibration.

Unpacking

The equipment comes with the standard parts shown in package content. Check and make sure they are

included and in good condition. If anything is missing, or damaged, contact the supplier immediately.

How To Clean Your LCD Monitor

Caution :

■To avoid the risk of electric shock, make sure your hands are dry before unplugging your monitor from or

plugging your monitor into an electrical outlet.

■When you clean your monitor, do not press down on the LCD screen. Pressing down on the screen can

scratch or damage your display. Pressure damage is not covered under warranty.

■Use only cleansers made specifically for cleaning monitors and monitor screens. Cleansers not made to

clean monitors and monitor screens can scratch the LCD display or strip off the finish.

■Do not spray any kind of liquid directly onto the screen or case of your monitor. Spraying liquids directly

onto the screen or case can cause damage which is not covered under warranty.

■Do not use paper towels or abrasive pads to clean your monitor. Using an abrasive pad or any wood based

paper product such as paper towels can scratch your LCD screen.

Cleaning Your Monitor

To clean your LCD safely, please follow these steps :

1 Disconnect the power cord.

2 Gently wipe the surface using a clean, dry microfiber cloth. Use as little pressure as possible.

Cleaning Tough Marks and Smudges

To remove tough marks and smudges,please follow these steps :

1 Disconnect the power cord.

2 Spray a small amount of non-abrasive cleanser on a microfiber cloth.

Caution : Do not sprayor apply any liquids directlyonto the monitor. Always apply the solution to your

microfiber cloth first, not directly on the parts you are cleaning.

3 Gently wipe the surface. Use as little pressure as possible.

4 Waituntil your monitor is completely dry before plugging it in and powering it up.

< Part 1 >

< 1.1 > Package Content

KDN9172 or 9192 unit X 1

- Wired mini USB optical mouse X 1

- 6ft Combo KVM cable X 1

- Power cord X 1

- M6 screw, cage nut & cup washer X 8

The above package content is only for the single console models.

It varies with options such as KVM, HDMI, DVI-D, AV, audio & DC power.

< 1.2 > Structure Diagram

1 4

3 7

1 LCD interchangeable module kit

2 Installation Slide

3 LCD membrane

4 Microswitch

5 Membrane switch (KVM option)

6 Mini USB optical mouse

7 Keyboard interchangeable module kit

8 Carry handle to release the 2-pt lock

< 1.2 > Dimension

Front View

Side View UNIT :

1mm = 0.03937 inch

Top View

Model

Product

Dimension

(W x D x

Packing

Dimension

(W x D x

Net

Weight

Gross

Weight

KDN9172

442x 650 x 44 mm

17.4 x 25.6 x 1.73"

595 x 860 x 140

23.4 x 33.9 x

5.5”

15.5

21 kg

46 lb

KDN9192

442x 700 x 44 mm

17.4 x 27.6 x 1.73"

595 x 910 x 140

23.4 x 35.8 x

5.5”

16.5

22 kg

48 lb

The weight is only for the single console models. It varies with accessories & options

such as KVM, HDMI, DVI-D, AV, audio & DC power.

< 1.3 > Installation - How to install Installation Slides

Step 1

¦ Insert the left and right rear mounting bracketsinto

the LCDconsole drawer.

Step 2

¦ Measure the depth of the front and rear mounting rails.

¦ Align each rear mounting bracketto a suitable length.

Step 3

Complete the installation

¦ Fix the LCD console drawer into the rack.

M6 screw, cage nut & cup washerx 8 are provided.

mbo

M cable

Combo

KVM cable

USBconsole KVM

< 1.4 > Connection to PS/2 or USB Server

LCD console drawer LCD console drawer

KVM

Co Combo

KV KVM cab

PS/2 server USB server

< 1.4 > Connection to external KVM

LCD console drawer LCD console drawer

KVM KVM

Combo

KVM cable

PS/2 console KVM

Caution : The LCD console drawer is hot-pluggable, but components of connected devices, such

as the servers and KVM switch, maynot be hot-pluggable. Plugging and unplugging cables while

servers and KVM are powered on maycause irreversible damage to the servers, KVM and LCD

console drawer. Before attempting to connect anything to the LCD console drawer, we suggest

turning off the power to all devices. Apply power to connected devices again only after the LCD

consoledrawer is receiving power.Thecompanyisnot responsiblefor damage caused in this way.

< Part 2 >

< 2.1 > Product Specifications

LCD

Panel KDN9172 KDN9192

Manufactur

Panel Size ( diagonal) 17-inch TFT color LCD 19-inch TFT color LCD

Displaypixel ( dots x lines ) 1280 x 1024 1280 x 1024

Brightness ( typ. )

250

Contrast Ratio ( typ.)

1000:1

Color 16.7

16.7

ViewingAngle ( L/R/U/D ) 80/80/80/80 80/80/80/80

ResponseTime ( ms )

Dot pitch ( mm )

0.264

0.294

DisplayArea ( mm ) 337.92Hx 270.33V376.32H x 301.05V

Surface treatmentHaze 25%, Hard-coating

Surface hardness

BacklightType

CCFL

MTBF ( hrs )

50,000

Video

Connectivity Digital HDMI HDMI 1.1, CEA-861-D

DVI DVI-D, TMDS single link

Analog VGA Analog 0.7Vp-p

Composite ( BNC ) NTSC & PAL

S-Video ( 4-pin ) NTSC & PAL

Plug & Play DVI/ VGA VESA EDID structure 1.3

Synchronization VGA Separate, Composite& SOG

Audio

Connectivity AudioInput Connector 3.5mm stereo jack

Impedance/ Power level 30kΩ/ 750mV

AudioOutput Connector 3.5mm stereo jack

Resistance / Powerlevel 30kΩ/ 2.8V

Speaker Output Power 2 x 2W

*When the audio output is connected, speaker output is OFF

Regulatory Safety Approval FCC & CE

Power Power Supply Range Auto-sensing 100 to 240VAC,

50 / 60Hz

Power Consumption Screen display ON 25W or less

Power saving mode 4W or less

Power button OFF1W or less

Environmental

Conditions Operating Temperature 0 to 50°C degree

Humidity 20~90%,non-condensing

Storage Temperature -5 to 60°C degree

Humidity 5~90%, non-condensing

Shock 10G acceleration (11ms duration)

Vibration 5~500Hz 1G RMS random

Physical

Specification KDN9172

KDN9192

Product ( W x D x H ) 442 x 650 x 44

17.4 x 25.6 x 1.73

inch

442 x 700 x 44

17.4 x 27.6 x 1.73

inch

Packing ( W x Dx H ) 595 x 860 x 140 mm

23.4 x 33.9 x 5.5 inch 595 x 910 x 140 mm

23.4 x 35.8 x 5.5 inch

Net Weight 15.5kgs / 34 lbs 16.5 kgs / 36 lbs

Gross Weight 21 kgs / 44 lbs 22kgs / 44\8 lbs

Applicable

Format VGA Input PC Signal1280 x 1024 x 60 / 75Hz

1280 x 960 x 60Hz

1280 x 760 x 60 / 75Hz

1152 x 864 x 75Hz

1024 x 768 x 60 / 70 / 75Hz

848 x 480 x 60Hz

800 x 600 x 60 / 72 /75Hz

720 x 400 x 70Hz

640 x 480 x 60 / 72 /75Hz

640 x 400 x 70Hz

640 x 350 x 70Hz

Andere Handbücher für KDN9172

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Acnodes LCD-Schublade Handbücher

Acnodes

Acnodes MKDH8170U Bedienungsanleitung

Acnodes

Acnodes M3232 Bedienungsanleitung

Acnodes

Acnodes MKDH8190C Bedienungsanleitung

Acnodes

Acnodes RP 1170 Bedienungsanleitung

Acnodes

Acnodes KD 9170 Bedienungsanleitung

Acnodes

Acnodes KD 8151 Bedienungsanleitung

Acnodes

Acnodes MKD6219 Bedienungsanleitung

Acnodes

Acnodes KDS61 Series Bedienungsanleitung

Acnodes

Acnodes KD84174 Bedienungsanleitung

Acnodes

Acnodes KDS 6198 Bedienungsanleitung

Acnodes

Acnodes RK 1000B Bedienungsanleitung

Acnodes

Acnodes KDS 51716 Bedienungsanleitung

Acnodes

Acnodes KDX81712 Bedienungsanleitung

Acnodes

Acnodes MKP1602 Bedienungsanleitung

Acnodes

Acnodes KDF8170 Bedienungsanleitung

Acnodes

Acnodes KD 51916 Bedienungsanleitung

Acnodes

Acnodes RK120D Bedienungsanleitung

Acnodes

Acnodes KDN9172 Bedienungsanleitung

Acnodes

Acnodes KD8172 Bedienungsanleitung

Acnodes

Acnodes KDS8228 Bedienungsanleitung

Acnodes

Acnodes KD 8158N Bedienungsanleitung

Acnodes

Acnodes RP 1175 Bedienungsanleitung

Acnodes

Acnodes RP3117 Bedienungsanleitung

Acnodes

Acnodes KD 8151 Bedienungsanleitung

Beliebte LCD-Schublade Handbücher anderer Marken

Ameriwood

Ameriwood 9524328PCOM Bedienungsanleitung

Kesseböhmer

Kesseböhmer TANDEM solo Bedienungsanleitung

Crystal Image Technologies

Crystal Image Technologies RMD-151-A Series Bedienungsanleitung

APW Wyott

APW Wyott Ease Extreme HDX-1-120 Bedienungsanleitung

NTI

NTI RACKMUX-V17-N Bedienungsanleitung

Austin Hughes

Austin Hughes CyberView L120 Bedienungsanleitung

Uplift Desk

Uplift Desk STR018 Bedienungsanleitung

StarTech.com

StarTech.com DuraView RACKCONS1501 Bedienungsanleitung

Mocka

Mocka Mischa Bedienungsanleitung

GRASS

GRASS DWD XP Bedienungsanleitung

StarTech.com

StarTech.com DuraView RACKCONS1701 Bedienungsanleitung

Fisher & Paykel

Fisher & Paykel IZONA CoolDrawer RB36S Bedienungsanleitung

Synergy Global Technology

Synergy Global Technology LCD1U17-44 Bedienungsanleitung

Fujitsu

Fujitsu RC25 Bedienungsanleitung

I-Tech

I-Tech RKP115 Bedienungsanleitung

iTech Company

iTech Company AMil-1900-D12e-AC Bedienungsanleitung

Raloy

Raloy Slim 1U Rackmount Bedienungsanleitung

MAVIS

MAVIS Falsterbo Chest Of Drawers Bedienungsanleitung