Acrel AGF-AE-D/200 Bedienungsanleitung

External Meter Wiring Instruction

Interface:

Specification：

General

Model No.

AGF-AE-D/200

Rated Voltage-Line to N

120V

Rated Voltage-Line to Line

240V

Extended Voltage Range

88%~110%

AC Frequency

60Hz

Grids Supported

L1/L2/N/PE

Power Consumption

1.2W

CT Rated RMS Current

200A

Number of Supplied CTs

Standard Compliance

Safety

UL1741

Installation Specifications

Meter Dimensions(H*W*D)

2.13*3.45*2.05in (54.1*87.8*52mm)

CT Dimension (H×W×D)

2.76*2.15*1.54in(70.5*54.5*39mm)

Meter Weight

0.44lbs (0.2kg)

Operating Temp. Range

-30~55℃

Relative Humidity

5 - 90%

Meter Mounting Type

DIN-Rail 35mm

COMM Port

CT Input

AC Power Input

Status Indicator

Accessory List:

CT Connector

Installation and Cable Connection：

Refer to Meter Wire Diagram attached on the 3rd page for more details.

CAUTION: Make sure the power is cut off before installation.

CAUTION: The direction of CT must be the same as shown on the Wire Diagram.

1. Install one CT onto L1 and connect the CT to the Meter CT Input terminals “L1 CT” (Red wire

to “+” and black wire to “-”).

2. Install the other CT onto L2 and connect the CT to the Meter CT Input terminals “L2 CT” (Red

wire to “+” and black wire to “-”).

3. Connect Main Panel L1, L2, Neutral and Ground (PE) to the Meter AC Power Input terminals

ΦL1, ΦL2, N and Ground respectively.

4. Connect the Meter COMM Port “RS485 A+” and “RS485 B-” to the Universal PCS “RS485-1

#7” and “RS485-1 #8” respectively.

NOTE:

1. Mount the Meter solidly in the Main Panel or in a separate electrical box.

2. Use 24AWG copper wire for AC Power Input, and CAT5e (24AWG) for communication cable.

3. Two CTs are the same, although their cables are marked in different colors.

4. Refer to Terminal Disassembling Instruction attached on the 4th page to remove the wire

on the Meter CT Input terminals if needed.

5. Refer to Status Indicator Instruction attached on the 4th page for more information about

the Status LED.

6. Refer to the manual of the Meter for more information.

CT Direction

Universal PCS RS485-1 Port

RS485-1 Port

Details

L1 L2

Grid

L1 L2

Load

RS232

RS485-4 RS485-1

BCMS

L1 L2

AGF-AE-D/200

Acrel

B-

A+ - + - +

L2 CT L1 CT

RS485

RS485-A

RS485-B

φL1φL2 N

Grid

Main Panel

Comm

Universal PCS

Meter Wire Diagram

Terminal Disassembling Instruction:

Step One Step Two Step Three

Status Indicator Instruction:

Indicator

Description

Troubleshooting

RUN

Blinking Green: Running normally

Solid Red＞3s: Internal fault

Replace the Meter

Blinking Yellow: No communication

L1/L2

Solid Green＞3s: No Current

Blinking Green: Positive power

Blinking Red: Negative power

Blinking Red & Green: High voltage＞130V

Blinking Red & Yellow: Low voltage＜70V

Blinking Yellow: Low voltage＜30V

Solid Yellow＞3s: Frequency abnormal,＜45Hz or＞70Hz

Choose Meter-Zero on the APP:

NOTE: Unless limits of battery power, the system starts to track the load on the meter.

Andere Acrel Messgerät Handbücher

Acrel

Acrel AMC Series Betriebsanleitung

Acrel

Acrel AMC Series Betriebsanleitung

Acrel

Acrel ACR10R Series Betriebsanleitung

Acrel

Acrel ADW310 Kurzanleitung

Acrel

Acrel AID120 Bedienungsanleitung

Acrel

Acrel DDSY1352 Bedienungsanleitung

Acrel

Acrel AIM-R100 Bedienungsanleitung

Acrel

Acrel AMC Series Betriebsanleitung

Acrel

Acrel ACR10R-D TE Series Technische Daten

Acrel

Acrel ARTM-Pn Bedienungsanleitung

Acrel

Acrel ADL200 Bedienungsanleitung

Acrel

Acrel ADL3000-E Betriebsanleitung

Acrel

Acrel DJSF1352-RN Betriebsanleitung

Acrel

Acrel AIM-T500L Series Bedienungsanleitung

Acrel

Acrel APM Series Betriebsanleitung

Acrel

Acrel AMC Series Betriebsanleitung

Acrel

Acrel GGF Series Bedienungsanleitung

Acrel

Acrel ARTM-Pn Bedienungsanleitung

Acrel

Acrel AMC Series Betriebsanleitung

Acrel

Acrel AID120 Bedienungsanleitung

Acrel

Acrel ADL400 Betriebsanleitung

Acrel

Acrel ADL400 Betriebsanleitung

Acrel

Acrel ADW310 Leitfaden

Acrel

Acrel AIM-T500 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung