ActionTec USB Bluetooth Bedienungsanleitung

1. Introduction 1

ContactingTechnical Support 2

2. Installing the USB Wireless Bluetooth Adapter 3

2.1 Install the Software 3

2.2 Connect the Adapter 7

3. Configuring your Bluetooth Adapter 10

3.1 Install the Software 10

3.2 Creating a Bluetooth Connection 10

3.3 Configure the Adapter 11

3.4 Connect to Another Device 12

4. Working with Bluetooth Software 17

4.1 TheBluetooth Tray 17

4.2 Access My Bluetooth Places 18

4.3 Finding Bluetooth Devices 18

4.4 Finding Bluetooth Services 19

4.5 Bluetooth Connection Status 21

4.6 Bluetooth Devices and Services 22

4.7 Send to Bluetooth 24

5. Configuring for Other Services / Applications 26

5.1 Opening Bluetooth Configuration 26

5.2 Bluetooth Services vs. Applications 26

5.3 The Bluetooth Exchange Folder 27

5.4 Configuration Settings 27

5.5 Bluetooth Applications 28

5.6 Bluetooth Services 38

5.7 Hardware Settings 48

5.8 Accessibility Settings 50

5.9 Discovery Settings 52

Table of Contents Page

Notices

Regulatory Compliance Notices 53

Warranty statements 55

Proprietary Notice and Disclaimer

Unless otherwise noted, this document and the information herein disclosed are propri-

etary to Actiontec Electronics, Inc the manufacturer. Any person or entity to whom this

document is furnished or who otherwise has possession thereof, by acceptance agrees that

it will not be copied or reproduced in whole or in part, nor used in any manner except to

meet the purposes for which it was delivered.

The information in this document is subject to change without notice and should not

be construed as a commitment by Actiontec the manufacturer. Although Actiontec the

manufacturer will make every effort to inform users of substantive errors, Actiontec the

manufacturer disclaims all liability for any loss or damage resulting from the use of this

document or any hardware or software described herein, including without limitation

contingent, special or incidental liability.

Note: PC is a trademark of IBM Corporation. Windows 98 , Windows 98 SE, Windows NT,

andWindowsXPis atrademark ofMicrosoft Inc.All otherbrand orproduct namesand logos

used in this manual are trademarks or registered trademarks of their respective holders.

Introduction

Thank you for purchasing the Actiontec USB Wireless Bluetooth Adapter.

Now you can truly enjoy the freedom of wireless connectivity with Actiontec's

Bluetooth Adapter. Simply plug this tiny adapter into any USB port on your

computer, and you can exchange information between it and any other

Bluetooth enabled device. Imagine sharing your Internet connection by simply

requesting it from any computer, or PDA. Connect on the go by using your cell

phone as a high speed modem or simply print to any bluetooth enabled printer,

The Actiontec USB Wireless Bluetooth Adapter lets you enjoy the freedom of true

mobility whether you're at the office or on the move.

What is Bluetooth?

Bluetooth is a worldwide standard for digital wireless communication and data

exchange between multiple devices. Bluetooth compliant devices exchange data

by establishing a relationship with each other, the first device acting as a client,

requests a connection, while the second device acting as a server accepts or rejects

that request. Some Bluetooth devices can behave as client and server; however

other devices can only behave as a client.

Package Contents

§Actiontec USB Wireless Bluetooth Adapter

§Installation CD

§Quick start guide

§Kid Defender Trial CD-ROM

Minimum System Requirements

§Microsoft Windows 98SE, ME, 2000, XP

§Available USB Port

§Pentium 90 or faster

§16MB or RAM

§TCP/IP installed

Technical Support

Actiontec Electronics prides itself on making high-quality, durable,

high-performance products. If you need assistance, the Actiontec Technical

SupportDepartmentisavailable everyday24hoursaday to provide professional

support.

Actiontec Electronics, Inc.

760 N. Mary Avenue

Sunnyvale, CA 94085

Technical Support

Phone: (888) 436-0657

E-mail: [email protected]

Internet: www.actiontec.com/support

InstallingtheUSB Wireless

BluetoothAdapter

The instructions that follow provide a visual guide to setting up the Actiontec

USB Wireless Bluetooth Adapter. It is recommended the user follow these

instructions prior to attempting any other procedures. This manual will guide

you through the hardware and software installation and configuration.

2.1 Install the Software

☞ STOP!!!: YoumustinstalltheBluetoothSoftwarePRIORtoconnecting

your Bluetooth Adapter to the computer. If you have already

connected the Bluetooth Adapter, please remove it now and restart

your computer.

1. Make sure your computer is turned on, then put the Actiontec Installation

CD-ROM in your CD-ROM drive.

2. The Installation software should start automatically. This may take a few

moments.

When you see this window. Click Next to continue

☞ Note: If you do not see the window above, click Start on the taskbar

and then select Run. Type d:/setup (or e:/setup, depending on the

drive letter of your CD-ROM drive), then click OK.

Actiontec USB Wireless Bluetooth Adapter

3. When you see the License Agreement screen appear, read the License

Agreement carefully. Click the circle next to “I accept the terms in the license

agreement” and then click Next to continue.

☞ Note: If you do not agree with the terms of the license agreement,

click the circle next to “I do not accept the terms in the license

agreement”andclick Next. Now youhaveterminatedthe installation

of this Bluetooth Adapter.

4. Click Next to continue.

5. Click Install to continue.

Chapter 2 Installing the USB Wireless Bluetooth Adapter

6. You will see this window. Please be patient as it will take several minutes to

install your Bluetooth software.

7. You may see this screen. If you do, click OK.

8. When the following screen appears, click Cancel to continue this installation.

Do NOT plug your Bluetooth Adapter into your computer at this time.

9. Click Finish to complete the software installation.

Actiontec USB Wireless Bluetooth Adapter

10. Click Yes to complete the software installation and restart your computer

now.

Chapter 2 Installing the USB Wireless Bluetooth Adapter

2.2 Connect the Adapter

1. Get the Bluetooth Adapter from the Actiontec Quick Start Kit

2. Take the cap off of the Bluetooth Adapter.

3. Follow the instructions for the type of computer that you are using.

Windows XP Users! You may see a Found New Hardware Wizard screen, once

you connect the Bluetooth Adapter to your computer. Please see below for

detailed instructions.

a. The “Found New Hardware Wizard” will run and the following screen will

appear, make sure “Install the software automatically (Recommended)” is

selected. When ready click Next to continue.

b. The“Found New Hardware Wizard” will automatically search for the appro-

priate drivers, once found it will request whether you would like to proceed

or not. In order to proceed with the installation, when the following window

appears, click on Continue Anyway.

Actiontec USB Wireless Bluetooth Adapter

c. The following screen appears, Click on Finish to complete the installation

process.

Laptop Users: Insert the Bluetooth Adapter into an open USB port.

Desktop Users:

a.) Get the USB Extension Cable from the Quick Start Kit.

b.) Insert one end into an open USB port on the computer.

Inhaltsverzeichnis

Andere ActionTec Adapter Handbücher

ActionTec

ActionTec 802CAG Bedienungsanleitung

ActionTec

ActionTec BTM200 Bedienungsanleitung

ActionTec

ActionTec 54 Mbps Wireless Multiport Print Server Bedienungsanleitung

ActionTec

ActionTec 802UIG-1 Bedienungsanleitung

ActionTec

ActionTec HCB1000 Bedienungsanleitung

ActionTec

ActionTec 802URG Bedienungsanleitung

ActionTec

ActionTec MegaPlug AV HPE200AV Bedienungsanleitung

ActionTec

ActionTec HWE05490-01 Bedienungsanleitung

ActionTec

ActionTec USB Wireless Bluetooth Adapter Bedienungsanleitung

ActionTec

ActionTec SBWD100KIT Bedienungsanleitung

ActionTec

ActionTec HCB1000 Bedienungsanleitung

ActionTec

ActionTec 802CI2 Konfigurationshandbuch

ActionTec

ActionTec ECB6250 KIT Bedienungsanleitung

ActionTec

ActionTec ECB7250 KIT Bedienungsanleitung

ActionTec

ActionTec ECB6250S02 Bedienungsanleitung

ActionTec

ActionTec MegaPlug HPE100T Bedienungsanleitung

ActionTec

ActionTec 802EAG Bedienungsanleitung

ActionTec

ActionTec MegaPlug HPE 200AVP Bedienungsanleitung

ActionTec

ActionTec MegaBoost C802URG Bedienungsanleitung

ActionTec

ActionTec MegaPlug AV Bedienungsanleitung

ActionTec

ActionTec 802UIG Bedienungsanleitung

ActionTec

ActionTec ECB5240M Bedienungsanleitung

ActionTec

ActionTec USB Wireless Adapter 802UI3(b) Bedienungsanleitung

ActionTec

ActionTec Wireless USB Driver 802UAT1 Bedienungsanleitung

Beliebte Adapter Handbücher anderer Marken

PCB Piezotronics

PCB Piezotronics 090B274 Bedienungsanleitung

Auvidea

Auvidea J20 Produkthandbuch

Gossen MetraWatt

Gossen MetraWatt AT3-III E Bedienungsanleitung

Akribis

Akribis ITF-21-BISS-MIT Bedienungsanleitung

Tenda

Tenda W54U Bedienungsanleitung

ROHO

ROHO AGILITY Bedienungsanleitung

PROLiNK

PROLiNK WN2001 Bedienungsanleitung

Hawking

Hawking HUF2 Bedienungsanleitung

Airlink101

Airlink101 AWLC4030 Bedienungsanleitung

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Bedienungsanleitung

Philips

Philips SWA4554S/10 Bedienungsanleitung

JVC

JVC TS-C9D2B Gebrauchsanweisung

NETGEAR

NETGEAR A6100 Bedienungsanleitung

D-Link

D-Link DWA-121 Bedienungsanleitung

Philips

Philips SWA2037 Bedienungsanleitung

Basalte

Basalte 0610-20 Bedienungsanleitung

Yealink

Yealink EHS40 Bedienungsanleitung

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Bedienungsanleitung