ActionTec MegaPlug HPE400AVP Bedienungsanleitung

Inhaltsverzeichnis

Andere ActionTec Netzwerk-Router Handbücher

ActionTec

ActionTec GT784WN Bedienungsanleitung

ActionTec

ActionTec W1000 Bedienungsanleitung

ActionTec

ActionTec GEU404000-01 Bedienungsanleitung

ActionTec

ActionTec T3200BV Bedienungsanleitung

ActionTec

ActionTec T3200M Bedienungsanleitung

ActionTec

ActionTec Actiontec Qwest Modular DSL Router M1000 Bedienungsanleitung

ActionTec

ActionTec ScreenBeam Mini 2 Kit Bedienungsanleitung

ActionTec

ActionTec MI424-WR Bedienungsanleitung

ActionTec

ActionTec GT724R Bedienungsanleitung

ActionTec

ActionTec T3270S Bedienungsanleitung

ActionTec

ActionTec MI424-WR Bedienungsanleitung

ActionTec

ActionTec C2000A Montageanleitung

ActionTec

ActionTec GT784WNV Verizon Bedienungsanleitung

ActionTec

ActionTec Wireless-Ready Bedienungsanleitung

ActionTec

ActionTec GT724WG Bedienungsanleitung

ActionTec

ActionTec GT704-WG Betriebsanleitung

ActionTec

ActionTec GT784WN Handbuch

ActionTec

ActionTec GE344000-01 Bedienungsanleitung

ActionTec

ActionTec GT784WN Bedienungsanleitung

ActionTec

ActionTec T3280V Bedienungsanleitung

ActionTec

ActionTec V1000H Bedienungsanleitung

ActionTec

ActionTec SW501R Bedienungsanleitung

ActionTec

ActionTec T3280 Bedienungsanleitung

ActionTec

ActionTec M1424WR Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise

MegaPlug HPE400AVP – User Guide

Encrypting the HPE400AVP Ethernet Switch

By default the adapter is NOT encrypted, so if your installation does not require encryption, so

the adapters can be installed and used, straight out of the box.

To create a secure, encrypted connection between adapters, follow these steps.

1. Connect the adapters to power outlets closest to the area where you plan to use them.

NOTE: To insure connectivity between the adapters, all adapters you wish to network together

should be on the same circuit in your breaker box.

2. Press and hold the security button on the first adapter for about 10 to 15 seconds; release it when

the device LEDs turn off.

3. All three LEDs will then come on for 1 second and turn off again signifying the device reboot. After

the reboot the Power LED will come back on solid green and the device will have generated a

unique encryption key.

4. Press and hold the security button on the second adapter for about 10 to 15 seconds; release it

when the device LEDs turn off. This adapter has generated a unique encryption key.

5. Press and hold the security button on the first adapter again for 2 seconds, then release it. The

Power LED on the first adapter starts to flash after you release the security button.

6. Now, press and hold the security button on the second adapter for 2 seconds then release it. The

Power LED will flash after you release the security button.

NOTE: From the moment the security button is pressed and released on the first adapter in Step 4,

you have only two minutes to press and release the security button on the second adapter and each of

the other adapters you would like to add to the network. Each adapter’s security button must be

pressed and released within the two minutes allowed for the adapters to share the same encryption

key, and be able to communicate.

7. Both the first adapter and the second adapter are now on a secure, encrypted network.

LED Indicators

The different colors of the link LEDs indicate different power line throughput conditions.

Red means the condition is poor and less than 50Mpbs,

Orange indicates a fair line condition of 50-100Mbps,

Green means the line is in good condition with over 100Mbps throughput.

You can still maintain a network with different line conditions, but performance will vary.

Resetting an HPE400AVP Ethernet Switch

The HPE400AVP Ethernet Switch must be plugged in to restore it to factory defaults. Using a small

object like a paper clip, depress and hold the reset button until the LEDs begin to flash. The reset

button will need to be depressed for about 10 to 15 seconds for the reset to occur.

The Reset button can be accessed via the small hole on the adapter, next to the Security button.

6/8/2009