Active SE01 Bedienungsanleitung
Instruction Manual
MODEL NO. SE01 Congratulations on the purchase of your new
ACTIVE™ pressure washer. In order to ensure you
have the best possible experience, please read
through the following instructions.
If you require any help, please contact the
customer service department at: 1-844-777-4555
1800 PSI 2.0 GPM
Pressure
Washer
Version: 2022 V0
2
Table of Contents
1. IMPORTANT PRECAUTIONS...................................................................................... 3
1.1 Definitions................................................................................................................................................... 3
1.2 Safety Warnings ....................................................................................................................................... 3
1.3 Intended Application............................................................................................................................. 5
2. SAFETY FEATURES AND ELECTRICAL INFORMATION ........................................... 5
2.1 Extension Cords....................................................................................................................................... 5
3. EXPLODED VIEW......................................................................................................... 6
4. PARTS LIST.................................................................................................................. 6
5. ASSEMBLY INSTRUCTIONS....................................................................................... 7
5.1 Surface Preparation .............................................................................................................................. 7
5.2 Water Supply (Cold Water Only)......................................................................................................... 7
5.3 Safety Advice............................................................................................................................................. 7
5.4 Assembly Steps ........................................................................................................................................ 7
6. OPERATING INSTRUCTIONS................................................................................... 11
6.1 Working with Foam Blaster................................................................................................................11
6.2 Shutting Down and Cleaning Up......................................................................................................12
6.3 Taking Breaks...........................................................................................................................................12
6.4 Warnings.....................................................................................................................................................12
7. WINTERIZING AND LONGTERM STORAGE .......................................................... 13
7.1 Optimum Winterizing Procedure ....................................................................................................13
7.2 Quick Winterizing Procedure............................................................................................................13
8. CLEANING AND MAINTENANCE............................................................................. 14
8.1 Connections .............................................................................................................................................14
8.2 Cleaning the Nozzle ..............................................................................................................................14
8.3 Water Filter Screen ...............................................................................................................................14
9. TECHNICAL SPECIFICATIONS................................................................................. 14
10. TROUBLESHOOTING.............................................................................................. 15
11. WARRANTY............................................................................................................. 17
3
Important Precautions
1. Important Precautions
IMPORTANT, RETAIN FOR FUTURE REFERENCE
AND READ CAREFULLY!
Do not attempt to install or operate this device
until you have read the safety instructions in this
manual. Safety items throughout this manual
are labelled with Danger, Warning, or Caution
depending on the risk type.
Failure to follow or comply with the instruction
manual in product set-up, usage or storage will
void the warranty.
1.1 Definitions
This is the safety alert symbol. It is used to alert
you to potential personal injury hazards. Obey all
safety messages that follow this symbol to avoid
possible injury or death.
1.2 Safety Warnings
DANGER
Indicates an imminently hazardous situation
which, if not avoided, will result in death or
serious injury.
DANGER
To reduce the risk of fire, electric shock, explosion
or injury to people, read the following:
•This product is intended for domestic outdoor
use only.
•The water spray must never be
directed towards any electric
wiring, devices, or directly towards
the pressure washer itself, or fatal
electric shock may occur.
•The pressure washer should not be used in
areas where gas vapours may be present. An
electric spark could cause an explosion or fire.
•Risk of explosion. When a combustible
liquid is sprayed, there can be danger of
fire or explosion, especially in a closed area.
Therefore, do not spray flammable liquids. Do
not use acids and solvents with this product
either. These products can cause physical
injuries to the operator and irreversible
damage to the device.
•Risk of electric shock. Inspect the cord before
using the device — do not use it if the cord is
damaged.
•Risk of injury. Do not direct the
water flow at people. The high-
pressure jet can be dangerous if
misused, and therefore must not
be directed at people, animals,
electrical devices or the unit itself.
•This device is capable of producing
high pressure as rated in the Technical
Specifications. To avoid rupture and injury, do
not operate this machine with components
rated less than the unit itself (including but
not limited to spray guns, hose, and hose
connections).
WARNING
Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.
CAUTION
Indicates a potentially hazardous situation
which, if not avoided, could result in minor or
moderate injury.
IMPORTANT
Installation, operation, or maintenance information
which is important but not hazard-related.
4
1. Important Precautions (cont.)
1.2 Safety Warnings (cont.)
WARNING — INJECTION HAZARD
• Equipment can cause serious injury if the
spray penetrates the skin. Do not point the
gun at anyone or any part of the body. In case
of penetration, seek medical aid immediately.
CAUTION — DETERGENTS
• This device has been designed for use with
detergents that are specifically approved
for pressure washer use. The use of other
cleaning detergents may aect the operation
of the device and void the warranty.
CAUTION — SPRAY GUN
• The spray gun kicks back, so hold it with both
hands. The trigger gun safety lock prevents
the trigger from being engaged accidentally.
However, the safety feature DOES NOT lock the
trigger in the ON position.
CAUTION — WATER CONNECTIONS
• For use with fresh and clean water only. Do not
use this product with other liquids.
• The water supply system must be protected
against backflow.
• Never use this product with water
contaminated with solvents (e.g. paint
thinners, gasoline, oil, etc.).
• Always prevent debris from being drawn into
the product by using a clean water source and
an additional water filter, if required.
• If this device is connected to a potable water
system, the system must be protected against
backflow.
• Suitable water temperature: from 5 to 40 °C (41
to 104 °F).
CAUTION — USE
• Learn how to stop the device and release the
pressure quickly. Familiarize yourself with the
controls.
• Keep all connections dry and o the ground.
• Avoid accidental starts. Shut power OFF before
connecting or disconnecting the power cord.
• Never carry the pressure washer by the cord.
• Do not pull on the cord to disconnect from
the outlet.
• To allow for free air circulation, the pressure
washer should not be covered during
operation.
• Do not operate the product when tired or
under the influence of alcohol or drugs.
• Do not stand on unstable surfaces. Stand with
both feet balanced at all times.
• Keep the operating area clear of people
and pets.
IMPORTANT — MAINTENANCE
• Any assembly, use or maintenance of the
product must be carried out by adults only.
• Follow the maintenance instructions specified
in the manual.
• If replacement of the power plug or cord is
needed, use only identical replacement parts.
• Repairing and replacing parts should be done
by a certified technician.
• Before servicing, cleaning or removal of any
parts, shut the power OFF and release the
pressure.
IMPORTANT — GROUNDING
• In a double-insulated product, two systems of
insulation are provided instead of grounding.
No grounding is provided on a double-
insulated product, nor should a means for
grounding be added to the product. Servicing
a double-insulated product requires extreme
care and knowledge of the system, and should
be done only by qualified service personnel.
Replacement parts of a double-insulated
product must be identical to the parts they
replace. A double-insulated product is marked
with the words “DOUBLE INSULATION” or “DOUBLE
INSULATED”. The symbol may also be marked
on the product.
Important Precautions
5
1. Important Precautions (cont.)
1.3 Intended Application
This product is designed for specific residential
applications. Do not modify or use this product
for any application other than the one it was
designed for. This equipment was not designed for
industrial use. Please refer to the icons below for
suggested applications. For questions regarding
other uses, please refer to our website at www.
activeproducts.com or call us at 1-844-777-4555.
2. Safety Features
and Electrical Information
The pressure washer is equipped with a stop
device that senses when the trigger on the spray
gun is released. It will open the power circuit to
the motor and cause the pressure washer motor
to stop. The motor will start again when the trigger
is pulled.
WARNING
• The pressure washer is also equipped with a
main power ON/OFF switch. It should always be
moved to the OFF position when the pressure
washer is not being used to prevent possible
injury or damage.
CAUTION — USE A SUFFICIENT GAUGE
• Maximum cable length: 50’ (15 m). Only use 14
AWG rated extension cords.
• Only use extension cords that are intended
for outdoor use. These extension cords are
identified by a marking that reads “Acceptable
for use with outdoor appliances; store indoors
while not in use.”
• Only use extension cords that have an
electrical rating not less than the rating of the
product (15 A).
• Do not use damaged extension cords. Examine
the extension cord before using and replace
it if damaged. Do not abuse extension cords
and do not pull on any cord to disconnect the
device.
• Keep cord away from heat and sharp edges.
• Always disconnect the extension cord from
the power outlet before disconnecting the
extension cord from the product.
• To reduce the risk of electric shock, keep all
connections dry and o the ground. Do not
touch the plug with wet hands.
IMPORTANT — APPLICATIONS
STAIRS LAWN EQUIPMENT VEHICLE
FENCING DECK OR PATIO GARAGE FLOOR
DRIVEWAY SIDING
2.1 Extension Cords
If possible, do not use extension cords with this
product. However, if you must use one, observe all
warnings and instructions listed below:
Important Precautions /
Safety Features and Electrical Information
6
Exploded View / Parts List
4. Parts List
Item # Part Name Qty. Part #
AQuick-connect wand 1 XE16-020-0002
B Gun assembly 1 UG01-020-0003
C Tips kit (4 pcs) 1 VE50-020-0004
D Foam blaster 1 XE29-060-1000
E High-pressure hose 1 SE01-010-0005
F Main unit 1 SE01-001-0000
Item # Part Name Qty. Part #
N/A Water filter 1 Pre-attached on
the machine
N/A Clean needle 1 Pre-attached on
the machine
A
B
C
D
E
F
7
5. Assembly Instructions
5.1 Surface Preparation
Before beginning any cleaning task, it is important
to inspect the area for objects that could create
a hazard. Remove any objects from the work area
that could be tripped over, such as toys or outdoor
furniture. Ensure that all doors and windows are
closed tightly.
5.2 Water Supply (Cold Water Only)
Only draw water through the unit. The device must
be used with cold water supply only. The water
hose must be at least 1/2” (13 mm) in diameter. The
water flow rate must not fall below 2 GPM (7.6 LPM).
The flow rate can be determined by running water
for one minute into an empty container. The water
supply temperature must not exceed 40 °C (104 °F).
5.3 Safety Advice
5.4 Assembly
CAUTION
• Never use the pressure washer to draw in
water contaminated with solvents (e.g. paint
thinners, gasoline, oil, etc.).
• Dirt in the water inlet will damage the unit.
To avoid this risk, we recommend checking
the water filter (located inside the water
inlet. To clean it out, refer to the Cleaning and
Maintenance section).
• Always prevent debris from being drawn into
the unit by using a clean water source and an
additional accessory water filter, if required.
• To prolong the life of the unit, let it rest for 5
minutes aer every 30 minutes of use.
• Check to make sure you have all the parts.
Attach high-pressure hose to the gun and the
pump outlet (Hand tighten only).
Connect to the garden hose to the inlet adaptor
(Hand tigghten only).
Attach garden hose to water supply and turn
water on.
1
2
3
Assembly Instructions
8
5. Assembly Instructions (cont.)
5.4 Assembly (cont.)
Push main swtich to “OFF” before plugging CFGI
ON / OFF button
4
5
0º15º
40º25º
To install tip, gently slide the collar back before
inserting it, then release the collar to lock the tip.
Attach the desired spray tip to the wand. The
spray tips are for the following purposes:
0° (Red): For tough spots and grimes (e.g.,
concrete surfaces).
15° (Yellow): For medium and heavy duty cleaning
tasks (e.g., driveway).
25° (Green): For general cleaning around the
house (e.g., patios, patio furniture, decks, siding).
40° (White): For light duty jobs (e.g., stucco walls,
glossy surfaces).
Assembly Instructions
9
5. Assembly Instructions (cont.)
5.4 Assembly (cont.)
Plug GFCI into power receptacle. Firmly press and release
the TEST button, then press and release the RESET button.
The light on the GFCI should be illuminated.
Release the safety trigger if it is locked.
RESET
TEST
6
7
WARNING
Make sure your hands are dry. Plug the unit into an outlet.parts.
Assembly Instructions
10
5. Assembly Instructions (cont.)
5.4 Assembly (cont.)
10 11
Purge air by squeezing the trigger on the gun
until there is a steady stream of water.
Push ON/OFF button, switch is set in ON position,
machine is ready to operate.
CAUTION
Drain unit aer each use (for storage):
remove water connection, turn ON the
machine for a few seconds and press gun
trigger to drain remaining water in the pump.
Turn OFF immediately.
PURGING
ON / OFF button
Assembly Instructions
Inhaltsverzeichnis
Andere Active Hochdruckreiniger Handbücher
