ACU-RITE DRO10X Bedienungsanleitung
Changing the Count Direction
on a DRO10X
Note which port the encoder you
need to change is plugged into. You
will need this information for later.
Changing the Count Direction
on a DRO10X
Power up the box.
When prompted,
press any key to
continue.
The power switch is located on the back,
directly under the power cord.
Changing the Count Direction
on a DRO10X
Reference your
encoders by
moving each axes
so they cross at
least 2 reference
marks on the
glass (~3“).
Changing the Count Direction
on a DRO10X
Press the Menu
button.
Changing the Count Direction
on a DRO10X
Use the up and
down arrow keys
to highlight the
Installation Setup
menu, and then
press enter.
Changing the Count Direction
on a DRO10X
Use the up and
down arrow keys to
highlight the
Encoder Setup
menu, and then
press the right
arrow key.
Changing the Count Direction
on a DRO10X
Use the up and
down arrow keys
to highlight the
port the encoder
you want to
change resolution
on is plugged into,
and then press
enter.
Changing the Count Direction
on a DRO10X
Use the up and
down arrow keys
to highlight the
Count Direction
change menu,
then press the
right arrow key.
Changing the Count Direction
on a DRO10X
Use the up and
down arrow keys
to highlight the
opposite Count
Direction, and
then press enter
twice.
Changing the Count Direction
on a DRO10X
Andere ACU-RITE Messgerät Handbücher
ACU-RITE
ACU-RITE smartHUB Bedienungsanleitung
ACU-RITE
ACU-RITE ENC 125 T Bedienungsanleitung
ACU-RITE
ACU-RITE VRO 300T Bedienungsanleitung
ACU-RITE
ACU-RITE 01410 Bedienungsanleitung
ACU-RITE
ACU-RITE SENC 50 Bedienungsanleitung
ACU-RITE
ACU-RITE MILLPWRG2 Bedienungsanleitung
ACU-RITE
ACU-RITE 06008RM Bedienungsanleitung
ACU-RITE
ACU-RITE 01083 Bedienungsanleitung
ACU-RITE
ACU-RITE 00256 Bedienungsanleitung
ACU-RITE
ACU-RITE 00276RM Bedienungsanleitung
