ACU-RITE 02005TBDI Bedienungsanleitung

Instruction Manual

SAVE THIS MANUAL FOR FUTURE REFERENCE.

Questions? Contact Customer Support at

(877) 221-1252 or visit www.AcuRite.com.

Weather Station

model 02005TBDI

CONTENTS

Unpacking Instructions ........... 2

Package Contents .................. 2

Product Registration ............... 2

Features & Benets: Sensor..... 2

Features & Benets: Display.... 3

Sensor Setup ......................... 5

Display Setup ........................ 6

Setup Preferences .................. 7

Intelli-Time® Clock................... 7

Set the Time, Date & Units ...... 7

Placement Guidelines ................ 8

Using the Weather Station......... 9

Troubleshooting ...................... 10

Care & Maintenance................11

Replace Intelli-Time® Battery .... 12

Calibration ............................. 12

Specications.......................... 13

FCC Information ..................... 13

Customer Support ................... 14

Warranty................................ 14

Congratulations on your new AcuRite product. To ensure the best

possible product performance, please read this manual in its entirety

and retain it for future reference.

Unpacking Instructions

Remove the protective lm that is applied to the LCD screen prior to using this

product. Locate the tab and peel off to remove.

Package Contents

1. Display Unit

2. Outdoor Sensor

3. Instruction Manual

PRODUCT REGISTRATION

to receive 1 year

warranty protection

www.AcuRite.com

IMPORTANT PRODUCT MUST BE REGISTERED

TO RECEIVE WARRANTY SERVICE

►

Features & Benets

OUTDOOR SENSOR

1. Integrated Hanger

For easy placement.

2. Wireless Signal Indicator

Flashes when data is being

sent to the display unit.

3. Battery Compartment

4. A-B-C Switch

ID code that must match display’s

A-B-C switch to ensure units

synchronize.

5. Battery Compartment Cover

29 30 31 32 33

1718

Features & Benets

Display Unit Front

Display Unit Back

19202123

910 11 9

DISPLAY UNIT FRONT

1. Day of the Week

2. Current Outdoor Temperature

Arrow icon indicates the direction the

temperature is trending.

3. Outdoor Sensor Signal Strength

4. High/Low Outdoor Humidity

Records

Highest and lowest humidity records

based on record viewing mode (#9).

5. High/Low Outdoor Temperature

Records

Highest and lowest temperature

records based on record viewing

mode (#9).

6. Forecasted High Temperature

7. Forecasted Low Temperature

8. 4 Hour Weather Forecast

9. Record Viewing Mode

Indicates viewing records for today,

all-time or “ “ auto-mode.

10. Outdoor Sensor Low Battery

Indicator

11. 4 to 8 Hour Weather Forecast

12. 8 to 12 Hour Weather Forecast

13. High/Low Indoor Humidity

Records

Highest and lowest humidity records

based on record viewing mode (#9).

14. High/Low Indoor Temperature

Records

Highest and lowest temperature

records based on record viewing

mode (#9).

15. Current Outdoor Humidity

Arrow icon indicates the direction the

humidity is trending.

16. Date

17. Geographic Region Selection

For setup preferences.

18. Current Indoor Temperature

Arrow icon indicates the direction the

temperature is trending.

19. Intelli-Time Clock®

20. Display Low Battery Icon

21. “ “ Icon

Appears while in SET mode.

22. Current Outdoor Humidity

Arrow icon indicates the direction the

humidity is trending.

23. TIME ZONE & AUTO DST

DISPLAY UNIT BACK

24. ”p” Button

For setup preferences.

25. “SET” Button

For setup preferences.

26. A-B-C Switch

ID code that must match sensor’s A-B-C

switch to ensure units synchronize.

27. ”q” Button

For setup preferences.

28. ”tt” Button

Press to select record viewing mode (#9).

29. “geo” Button

Set geographical region preferences.

30. “RESET” Button

Full reset to factory defaults.

31. “zone” Button

Set time zone preferences.

32. Battery Compartment

33. Battery Compartment Cover

34. Display Kickstand

For tabletop placement.

35. Intelli-Time® Battery Compartment

36. Integrated Hang Hole

For easy wall mounting.

SETUP

Set the A-B-C Switch

The A-B-C switch is located inside

the battery compartment. It can

be set to A, B or C. However,

you must select the same letter

choices for both the sensor and

the display unit in order for the

units to synchronize.

Install or Replace Batteries

AcuRite recommends high quality

alkaline or lithium batteries in

the outdoor sensor for the best

product performance. Heavy duty

or rechargeable batteries are not

recommended.

The sensor requires lithium

batteries in low temperature

conditions. Cold temperatures

can cause alkaline batteries

to function improperly. Use

lithium batteries in the sensor for

temperatures below -4ºF / -20ºC.

1. Slide off the battery

compartment cover. Take note

of the A-B-C switch setting

inside the battery compartment

for display unit setup.

2. Insert 2 x AA batteries into

the battery compartment, as

shown. Follow the polarity

(+/-) diagram in the battery

compartment.

3. Replace the battery cover.

Sensor Setup

1A-B-C Switch

set to match

display unit

2Install Batteries

2 AA batteries

A B C

Display Unit Setup

Set the A-B-C Switch

Locate the A-B-C switch inside

the battery compartment. Set

the A-B-C switch to A, B or C.

You must select the same letter

choices for both the display unit

and the sensor in order for the

units to synchronize.

Install or Replace Batteries

1. Remove the battery

compartment cover.

2. Insert 3 x AA alkaline

batteries into the battery

compartment, as shown.

Follow the polarity

(+/-) diagram in the battery

compartment.

3. Replace the battery cover.

1A-B-C Switch

set to match

sensor

2Install Batteries

3 AA alkaline

batteries

A B C

SETUP

PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE

WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.

BATTERY SAFETY: Clean the battery contacts and also those of the device prior to battery installation. Remove batteries from equipment which is not to be

used for an extended period of time. Follow the polarity (+/-) diagram in the battery compartment. Promptly remove dead batteries from the device. Dispose of used

batteries properly. Only batteries of the same or equivalent type as recommended are to be used. DO NOT incinerate used batteries. DO NOT dispose of batteries in ﬁre,

as batteries may explode or leak. DO NOT mix old and new batteries or types of batteries (alkaline/standard). DO NOT use rechargeable batteries. DO NOT recharge

non-rechargeable batteries. DO NOT short-circuit the supply terminals.

ABCD

EFG

Setup: Geographic Region

Select your geographic region according to

the map (pictured right) by pressing the

“geo” button, located on the back of the unit in

the battery compartment. The letters for each

corresponding GEO region are shown on the

display screen. Geographic region must be set

in order for Precision Forecasting to function

properly. *The “ ” icon and geographic

region letter are only visible in GEO set mode.

You will automatically exit GEO set mode if no

buttons are pressed for 10 seconds. Enter GEO set

mode at any time by pressing the “geo” button

located inside the battery compartment.

Intelli-Time®Clock

Intelli-Time clock and calendar are pre-programmed

to the correct time and date, and update automatically for Daylight Saving

Time. All you need to do is select your time zone using the “zone” button

located inside the battery compartment.

Set the Time, Date & Units

Press the “SET” button, located on the back of the display unit, to enter SET

MODE. Once in set mode, the preference you are currently setting will blink on

the display.

To adjust the currently selected (ashing) item, press and release the “p” or

“q“ buttons (press and HOLD to fast adjust).

To save your adjustments, press and release the “SET” button again to adjust

the next preference. The preference set order is as follows:

TIME ZONE ( PST MST CST EST AST HAST AKST)

AUTO DST (Daylight Saving Time ON or OFF)*

CLOCK HOUR

CLOCK MINUTE

CALENDAR MONTH

CALENDAR DATE

CALENDAR YEAR

UNITS: TEMPERATURE (ºF or ºC)

*If you live in an area that observes DST, DST should be set to ON even if it is

not currently Daylight Saving Time.

You will automatically exit SET MODE if no buttons are pressed for 30 seconds.

Enter SET MODE at any time by pressing the “SET” button.

Placement for Maximum Accuracy

AcuRite sensors are sensitive to surrounding environmental conditions. Proper

placement of both the display unit and outdoor sensor are critical to the

accuracy and performance of this product.

Display Unit Placement

Place display unit in a dry area free of dirt and dust. Display stands

upright for tabletop use or is wall-mountable. For wall mounting,

hang using the keyhole located on back of the unit.

Outdoor Sensor Placement

Sensor must be placed outside to observe outdoor conditions. Sensor

is water resistant and is designed for general outdoor use, however,

to extend its life place the sensor in an area protected from direct

weather elements.

Hang the sensor using the integrated hang holes or hanger, or by

using string (not included) to hang it from a suitable location, like a

well covered tree branch. The best location is 4 to 8 feet above the

ground with permanent shade and plenty of fresh air to circulate

around the sensor.

Important Placement Guidelines

• To ensure accurate temperature measurement, place units out of direct

sunlight and away from any heat sources or vents.

• Display unit and outdoor sensor must be within 330 ft (100 m) of each other.

• To maximize wireless range, place units away from large metallic items, thick

walls, metal surfaces, or other objects that may limit wireless communication.

• To prevent wireless interference, place both units at least 3 ft (.9 m) away

from electronic devices (TV, computer, microwave, radio, etc.).

TV 3

(100 meters)

(330 feet maximum)

(.91 m)

LEAST

APART

Setup is Complete

The sensor will now synchronize with the display unit. It may take a few

minutes for synchronization to complete. NOTE: It will take up to 4 hours to

generate a weather forecast after initial setup.

Using the Weather Station

Precision Weather Forecasting

AcuRite’s Precision Forecasting provides your personal forecast of morning,

noon & night (4 hour, 4 to 8 hour and 8 to 12 hour) weather conditions. The

patent-pending technology combines regional weather patterns with data

measured by a sensor in your yard. It generates a forecast with pinpoint

accuracy - personalized for your exact location.

OPERATION

SNOW / RAIN

MIX LIKELY

RAIN

LIKELY

SNOW

LIKELY

STORMY

& WINDY

MOSTLY

CLOUDY

(flashing=stormy)

View the complete list of icons at www.AcuRite.com/acurite-icons

High & Low Records

Today’s high and low records are displayed for indoor and outdoor

temperature and humidity. Today’s records automatically clear at 12:00am

midnight every day. All-time high and low records are the maximum and

minimum readings recorded since batteries were installed.

Press the “tt” button to cycle through records for “today”, “all-time”, or

“ ” auto-mode. High & low records will automatically cycle through “today”

and “all-time” when “ ” auto-mode is selected.

To manually reset the high/low records currently being viewed, press and hold

the “p” on the back of the display to clear high records or press and hold

“q” on the back of the display to clear low records. Dashes display to conrm

you have cleared the records.

Troubleshooting

No outdoor sensor

reception

no bars

If the wireless signal indicator shows no bars:

• Relocate the display unit and/or the outdoor sensor.

The units must be within 330 ft (100 m) of each other.

• Make sure both units are placed at least 3 feet (.9 m)

away from electronics that may interfere with the

wireless communication (such as TVs, microwaves,

computers, etc).

• Use standard alkaline batteries (or lithium batteries in

sensor when temperature is below -4ºF/-20ºC). Do not

use heavy duty or rechargeable batteries. NOTE: It

may take up to 20 minutes for display unit and sensor

to synchronize after batteries are replaced.

Display screen

not working

• Check that the batteries are installed correctly.

Batteries may need to be replaced.

• Reset display by pressing the RESET button, located in

the battery compartment on the display unit. Time and

date will need to be entered after a reset.

• Forecast will be blank for rst 4 hours after battery

installation.

Outdoor

temperature

is ashing or

showing dashes

Flashing of the outdoor temperature is generally an

indication of wireless interference.

1. Bring both the sensor and display unit indoors and

remove batteries/power adapter from both.

2. Make sure the A-B-C switch on both units match.

3. Reinstall batteries in the outdoor sensor.

4. Reinstall batteries in the display unit.

5. Let the units sit within a couple feet of each other

for about 20 minutes to gain a strong connection.

Inaccurate

temperature

or humidity

• Make sure both the display unit and sensor are

placed out of direct sunlight and away from any heat

sources or vents (see page 8).

• Make sure both units are positioned away from any

sources of moisture.

Inhaltsverzeichnis

Andere ACU-RITE Wetterstation Handbücher

ACU-RITE

ACU-RITE 00875 Bedienungsanleitung

ACU-RITE

ACU-RITE 502 Bedienungsanleitung

ACU-RITE

ACU-RITE 01608 Bedienungsanleitung

ACU-RITE

ACU-RITE 02036WB Bedienungsanleitung

ACU-RITE

ACU-RITE 00639W Bedienungsanleitung

ACU-RITE

ACU-RITE 1050 Bedienungsanleitung

ACU-RITE

ACU-RITE 06095 Bedienungsanleitung

ACU-RITE

ACU-RITE 309 Bedienungsanleitung

ACU-RITE

ACU-RITE 00821SBDI Bedienungsanleitung

ACU-RITE

ACU-RITE 825 Bedienungsanleitung

ACU-RITE

ACU-RITE 06007RM Bedienungsanleitung

ACU-RITE

ACU-RITE 01139 Bedienungsanleitung

ACU-RITE

ACU-RITE 01202 Bedienungsanleitung

ACU-RITE

ACU-RITE 06020 Bedienungsanleitung

ACU-RITE

ACU-RITE 00502 Bedienungsanleitung

ACU-RITE

ACU-RITE 605 Bedienungsanleitung

ACU-RITE

ACU-RITE 01022 Bedienungsanleitung

ACU-RITE

ACU-RITE 00815 Bedienungsanleitung

ACU-RITE

ACU-RITE 01021 Bedienungsanleitung

ACU-RITE

ACU-RITE 01201 Bedienungsanleitung

ACU-RITE

ACU-RITE 01518 Bedienungsanleitung

ACU-RITE

ACU-RITE Air 01412M Bedienungsanleitung

ACU-RITE

ACU-RITE 06088 Bedienungsanleitung

ACU-RITE

ACU-RITE 615 Bedienungsanleitung

Beliebte Wetterstation Handbücher anderer Marken

Auriol

Auriol AHFL 433 A1 Bedienungsanleitung

Hyundai

Hyundai WS 2202 Bedienungsanleitung

NexSens

NexSens G2-HYDROMET Bedienungsanleitung

IROX

IROX HBVR761 UV-X Bedienungsanleitung

La Crosse Technology

La Crosse Technology C86371 Bedienungsanleitung

ADE

ADE WS 1711 Bedienungsanleitung

Auriol

Auriol z29592 Bedienungsanleitung

Auriol

Auriol 296289 Bedienungsanleitung

Hyundai

Hyundai WS 2266 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-2210 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-811561 Bedienungsanleitung

Ventus

Ventus W177 Bedienungsanleitung

National Geographic

National Geographic VA Colour RC Bedienungsanleitung

Levenhuk

Levenhuk Discovery Report WA40 Bedienungsanleitung

Instant Transmission

Instant Transmission MA 10410 Bedienungsanleitung

Lutron Electronics

Lutron Electronics PHB-318 Bedienungsanleitung

WAREMA

WAREMA EWFS Weather station eco Bedienungsanleitung

TFA

TFA 30.3013.IT Bedienungsanleitung