ACU-RITE 02098 Bedienungsanleitung

Instruction Manual

SAVE THIS MANUAL FOR FUTURE REFERENCE.

Questions? Contact Customer Support at

877-221-1252 or visit www.AcuRite.com.

CONTENTS

Unpacking Instructions ........... 2

Package Contents .................. 2

Product Registration ............... 2

Features & Benets: Sensor...... 2

Features & Benets: Display ..... 3

Setup .................................... 5

Sensor Setup ......................... 5

Display Setup ........................ 6

Set the Time, Date & Units ...... 7

Backlight Settings................... 7

Placement Guidelines ............. 8

Using the Weather Station...... 9

Programmable Alarms...........10

Troubleshooting ....................11

Care & Maintenance.............12

Calibration ...........................12

Specications........................13

FCC Information ...................13

Customer Support .................14

Warranty..............................14

Weather Station

model 02098

Congratulations on your new AcuRite product. To ensure the best

possible product performance, please read this manual in its entirety

and retain it for future reference.

Unpacking Instructions

Remove the protective lm that is applied to the LCD screen prior to using this

product. Locate the tab and peel off to remove.

Package Contents

1. Display with Tabletop Stand

2. Outdoor Sensor

3. Instruction Manual

4. Power Adapter

Features & Benets

OUTDOOR SENSOR

1. Integrated Hanger

For easy placement.

2. Wireless Signal Indicator

Flashes when data is being sent

to the display.

3. Battery Compartment

4. A-B-C Switch

ID code that must match display’s

A-B-C switch to ensure units synchronize.

5. Battery Compartment Cover

PRODUCT REGISTRATION

www.AcuRite.com

IMPORTANT PRODUCT MUST BE REGISTERED

TO RECEIVE WARRANTY SERVICE

Features & Benets

FRONT OF DISPLAY

1. Current Outdoor Temperature

Arrow icon indicates the direction

temperature is trending.

2. Outdoor Sensor Signal Strength

3. Sensor Low Battery Indicator

4. Current Outdoor Humidity

Arrow icon indicates the direction

humidity is trending.

5. Moon Phase

6. Button

For viewing high and low records.

7. and Buttons

For setup preferences.

8. Clock

9 . Button

For setup preferences.

10. Display Low Battery Indicator

11. Button

For alarm setup.

12. Date

13. Icon

Indicates display is in auto-dimming

brightness mode (see page 7).

14. Current Indoor Humidity

Arrow icon indicates direction humidity is

trending.

15. Current Indoor Temperature

Arrow icon indicates direction temperature is

trending.

16. Current Barometric Pressure

Arrow icon indicates the direction pressure is

trending.

17. 12 to 24 Hour Weather Forecast

Self-calibrating forecasting pulls data from

the outdoor sensor to generate your personal

forecast.

18. Icon

Disappears after weather forecast

self-calibration is complete.

19. Alarm ON Indicator

Indicates alarm is activated to emit an

audible alert when conditions exceed your

presets (see page 10).

6 7 8 9 10 711

16171819

Features & Benets

BACK OF DISPLAY

1. Backlight Button

For momentary backlight and

dimmer settings.

2. Integrated Hang Holes

For easy wall mounting.

3. Backup Battery Compartment

4. A-B-C Switch

ID code that must match sensor’s A-B-C

switch to ensure units synchronize.

5. Plug-in for Power Adapter

6. Power Adapter

7. Battery Compartment Cover

8. RESET Button

For full reset to factory defaults.

SETUP

Sensor Setup

Set the A-B-C Switch

The A-B-C switch is located inside

the battery compartment. It can

be set to A, B or C. However,

you must select the same letter

choices for both the sensor and

the display in order for the units

to synchronize.

Install or Replace Batteries

AcuRite recommends high quality

alkaline or lithium batteries for

the best product performance.

Heavy-duty or rechargeable

batteries are not recommended.

The sensor requires lithium

batteries in low-temperature

conditions. Cold temperatures

can cause alkaline batteries

to function improperly. Use

lithium batteries in the sensor for

temperatures below -4ºF / -20ºC .

1. Slide off the battery

compartment cover. Take

note of the A-B-C switch

setting inside the battery

compartment.

2. Insert 2 x AA batteries into

the battery compartment, as

shown. Follow the polarity

(+/-) diagram in the battery

compartment.

3. Replace the battery cover.

1A-B-C Switch

Set to match

display

2Install Batteries

2 AA batteries

A B C

PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE

WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.

BATTERY SAFETY: Clean the battery contacts and also those of the device prior to battery installation. Remove batteries from equipment that will not be

used for an extended period of time. Follow the polarity (+/-) diagram in the battery compartment. Promptly remove dead batteries from the device. Dispose of used

batteries properly. Only batteries of the same or equivalent type as recommended are to be used. DO NOT incinerate used batteries. DO NOT dispose of batteries in ﬁre,

as batteries may explode or leak. DO NOT mix old and new batteries or types of batteries (alkaline/standard). DO NOT use rechargeable batteries. DO NOT recharge

non-rechargeable batteries. DO NOT short-circuit the supply terminals.

IMPORTANT: Batteries are

a backup power source to

preserve records in the event of

a power outage. Power adapter

is recommended as the primary

power source to enjoy the full

functionality of this product.

Display Setup

1Set the A-B-C Switch

Locate the A-B-C switch inside

the battery compartment. Set

the A-B-C switch to A, B or C.

You must select the same letter

choices for both the display and

the sensor in order for the units to

synchronize.

Install or Replace Backup

Batteries (optional)

1. Remove the battery

compartment cover.

2. Insert 3 x AAA alkaline

batteries into the battery

compartment, as shown. Follow

the polarity (+/–) diagram in

the battery compartment.

3. Replace the battery cover.

Plug in Power Adapter

For the best performance, plug

in the power adapter as the main

power source for this product.

Install Backup

Batteries

3 AAA Batteries

(optional)

3Plug in

Power Adapter

1A-B-C Switch

Set to match

sensor

A B C

Set the Time, Date & Units

Press and release the “ ” button, located on the front of the display unit, to

enter SET MODE. Once in set mode, the preference you are currently setting

will blink on the display.

To adjust the currently selected (ashing) item, press and release the “ ” or

“ ” buttons (press and HOLD to fast adjust).

To save your adjustments, press and release the “ ” button again to adjust

the next preference. The preference set order is as follows:

LANGUAGE (ENGLISH, FRENCH)

AUTO DST (Daylight Saving Time ON or OFF)*

CLOCK HOUR

CLOCK MINUTE

CALENDAR MONTH

CALENDAR DATE

CALENDAR YEAR

TEMPERATURE UNITS (ºF or ºC)

BAROMETRIC PRESSURE UNITS (hPa or inHg)

*If you live in an area that observes Daylight Saving Time, DST should be set

to ON, even if it is not currently Daylight Saving Time.

You will automatically exit SETUP MODE if no buttons are pressed for 10

seconds. Enter setup mode at any time by pressing the “ ” button.

Display Backlight Settings

This weather station’s color display features three different lighting settings:

High (100%) brightness, Medium (60%) brightness and Low (15%) brightness.

When display is powered with the power adapter, backlight remains on at

100% brightness. Press Backlight button once to dim to 60% brightness; press

again to dim to 15%, press a third time to enter AUTO-DIM mode.

NOTE: Pressing and holding the “ ” button for 5 seconds will disable the

backlight. Once any button is pressed, the backlight will return to your selected

setting.

AUTO-DIM MODE: Automatically adjusts display brightness based on time of day and year.

MARCH 11- NOVEMBER 4 6:00 a.m. - 9:00 p.m. = 100% brightness

9:01 p.m. - 5:59 a.m.= 15% brightness

NOVEMBER 5 - MARCH 10 7:30 a.m. - 7:00 p.m.= 100% brightness

7:01 p.m. - 7:29 a.m. = 15% brightness

Placement for Maximum Accuracy

AcuRite sensors are sensitive to surrounding environmental conditions. Proper

placement of both the display and the outdoor sensor are critical to the

accuracy and performance of this product.

Display Placement

Place the display in a dry area free of dirt and dust. Display

stands upright for tabletop use or is wall-mountable.

Outdoor Sensor Placement

Sensor must be placed outside to observe outdoor conditions.

Sensor is water-resistant and is designed for general outdoor

use, however, to extend its life place the sensor in an area

protected from direct weather elements.

Hang the sensor using the integrated hang holes or hanger, or

by using string (not included) to hang it from a suitable location,

like a well covered tree branch. The best location is 4 to 8 feet

(1 to 2 meters) above the ground with permanent shade and

plenty of fresh air to circulate around the sensor.

Important Placement Guidelines

• To ensure accurate temperature measurement, place units out of direct

sunlight and away from any heat sources or vents.

• Display and outdoor sensor must be within 330 ft (100 m) of each other.

• To maximize wireless range, place units away from large metallic items, thick

walls, metal surfaces, or other objects that may limit wireless communication.

• To prevent wireless interference, place both units at least 3 ft (90 cm) away

from electronic devices (TV, computer, microwave, radio, etc.).

Setup is Complete

The sensor will now synchronize with the display. It may take a few minutes for

synchronization to complete. Please refer to the troubleshooting section of this

manual if anything appears to be functioning improperly.

(330 feet maximum)

(100 meters)

3feet

(.9m)

LEAST

APART

Using the Weather Station

Learning Mode

Self-calibrating forecasting uses a unique algorithm to analyze changes in

pressure over a time period (called Learning Mode) to determine your altitude.

After 14 days, the icon disappears from the display screen. At this point,

the self-calibrated pressure is tuned in to your location and the unit is ready for

superior weather prediction.

Weather Forecast

AcuRite’s patented self-calibrating forecasting provides your personal forecast

of weather conditions for the next 12 to 24 hours by collecting data from the

sensor in your backyard. It generates a forecast with pinpoint accuracy -

personalized for your exact location.

OPERATION

View the complete list of icons at www.AcuRite.com/acurite-icons

Barometric Pressure

Subtle variations in barometric pressure greatly affect the weather. This

weather station displays the current pressure with an arrow icon to indicate

the direction the pressure is trending (FALLING, STEADY, or RISING).

Moon Phase

Track the phases of the moon, conveyed through simple lunar phase icons:

High & Low Records

Today’s high and low records are displayed for indoor and outdoor

temperature and humidity. Today’s records automatically clear at 12:00am

midnight every day.

Press the “ “ button to cycle through high and low recorded values for

outdoor and indoor temperature and humidity. While viewing all-time records,

a date and timestamp are shown for when each value was recorded. You will

automatically exit records if no buttons are pressed for 8 seconds.

To manually clear a HIGH or LOW record, press and HOLD both the “ “ and

““ buttons simultaneously for 3 seconds while viewing the record(s) you wish

to clear. Dashes display to conrm you have cleared the record(s).

FULL

NEW WAXING

CRESCENT

WANING

CRESCENT

1ST

QUARTER

3RD

QUARTER

SNOW / RAIN

MIX LIKELY

RAIN

LIKELY

SNOW

LIKELY

STORMY

& WINDY

CLOUDY

(flashing=stormy)

Programmable Alarms

This display features programmable alarms that sound an alert to notify you

when a value (for time, temperature or humidity) has been reached or

exceeded. When an alarm is triggered, the display emits an audible beep and

ashes data in the affected category. You can customize the alarms by turning

ON or OFF the alarms you’d like activated or deactivated, and by inputting your

own values to trigger the alarm.

Setup an Alarm

1. Press and release the “ ” button until the reading for which you wish to

set an alarm is shown on the display. “ ” will be shown.

2. Press and release the “ “ or “ “ buttons until “ ” appears.

3. Press and release the “ ” button. The current HIGH alarm value will be shown.

4. Press and release the “ “ or “ “ buttons to adjust the alarm’s HIGH value.

5. Press and release the “ ” button. The current LOW alarm value will be shown.

6. Press and release the “ “ or “ “ buttons to adjust the alarm’s LOW value.

7. Press and release the “ ” button to end alarm adjustments, OR press

and release the “ ” button to cycle to the next reading.

Disable an Alarm

1. Press and release the “ ” button until the reading for which you wish to

disable an alarm is shown on the display. “ ” will be shown.

2. Press and release the “ “ or “ “ buttons until “ ” appears.

3. Press and release the “ ” button to cycle to the next reading.

4. Repeat steps 1-3, as needed.

NOTE: To disable ALL alarms at once, press and HOLD the “” button for

10 seconds.

You will automatically exit alarm SET MODE if no buttons are pressed for

10 seconds. Enter alarm SET MODE at any time by pressing the “” button.

Inhaltsverzeichnis

Andere ACU-RITE Wetterstation Handbücher

ACU-RITE

ACU-RITE 01538 Bedienungsanleitung

ACU-RITE

ACU-RITE 02035 Bedienungsanleitung

ACU-RITE

ACU-RITE Iris Bedienungsanleitung

ACU-RITE

ACU-RITE 02007/06035RM Bedienungsanleitung

ACU-RITE

ACU-RITE 1086 Bedienungsanleitung

ACU-RITE

ACU-RITE 02027 Bedienungsanleitung

ACU-RITE

ACU-RITE 01121 Bedienungsanleitung

ACU-RITE

ACU-RITE 01010 Bedienungsanleitung

ACU-RITE

ACU-RITE 518346 Bedienungsanleitung

ACU-RITE

ACU-RITE 00621 Bedienungsanleitung

ACU-RITE

ACU-RITE 1015 Bedienungsanleitung

ACU-RITE

ACU-RITE 06100M Bedienungsanleitung

ACU-RITE

ACU-RITE 02027 Bedienungsanleitung

ACU-RITE

ACU-RITE 06022 Bedienungsanleitung

ACU-RITE

ACU-RITE 11132-1500RX Bedienungsanleitung

ACU-RITE

ACU-RITE 02033 Bedienungsanleitung

ACU-RITE

ACU-RITE 00593W Bedienungsanleitung

ACU-RITE

ACU-RITE 1602RX Bedienungsanleitung

ACU-RITE

ACU-RITE 02038 Bedienungsanleitung

ACU-RITE

ACU-RITE 01604 Bedienungsanleitung

ACU-RITE

ACU-RITE 75077 Bedienungsanleitung

ACU-RITE

ACU-RITE 06022RM Bedienungsanleitung

ACU-RITE

ACU-RITE 2007 Bedienungsanleitung

ACU-RITE

ACU-RITE 00787 Bedienungsanleitung

Beliebte Wetterstation Handbücher anderer Marken

Auriol

Auriol AHFL 433 A1 Bedienungsanleitung

Hyundai

Hyundai WS 2202 Bedienungsanleitung

NexSens

NexSens G2-HYDROMET Bedienungsanleitung

IROX

IROX HBVR761 UV-X Bedienungsanleitung

La Crosse Technology

La Crosse Technology C86371 Bedienungsanleitung

ADE

ADE WS 1711 Bedienungsanleitung

Auriol

Auriol z29592 Bedienungsanleitung

Auriol

Auriol 296289 Bedienungsanleitung

Hyundai

Hyundai WS 2266 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-2210 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-811561 Bedienungsanleitung

Ventus

Ventus W177 Bedienungsanleitung

National Geographic

National Geographic VA Colour RC Bedienungsanleitung

Levenhuk

Levenhuk Discovery Report WA40 Bedienungsanleitung

Instant Transmission

Instant Transmission MA 10410 Bedienungsanleitung

Lutron Electronics

Lutron Electronics PHB-318 Bedienungsanleitung

WAREMA

WAREMA EWFS Weather station eco Bedienungsanleitung

TFA

TFA 30.3013.IT Bedienungsanleitung