ACU-RITE 06019RM Bedienungsanleitung

Archived Products

Instruction Manual

Display for 3-in-1 Weather Sensor

model 06019RM

Package Contents

1. Display unit with tabletop stand

2. Power adapter

3. Instruction Manual

This product requires an AcuRite 3-in-1 Weather Sensor (model 06008RM; sold

separately) to be operational.

IMPORTANT PRODUCT MUST BE REGISTERED

TO RECEIVE WARRANTY SERVICE

PRODUCT REGISTRATION

to receive 1 year

warranty protection

www.AcuRite.com

►

Questions? Contact Customer Support at

(877) 221-1252 or visit www.AcuRite.com.

SAVE THIS MANUAL FOR FUTURE REFERENCE.

Features & Benets 1 2 3 4 5 6 7

Display Unit

27 9

26 10

25 11

24 12

23 13

1718 16192021

DISPLAY UNIT

1. Current Outdoor Temperature

Arrow icon indicates direction

temperature is trending.

2. Sensor Low Battery Indicator

3. Average Wind Speed

Average of all speeds over last

30 minutes or calibrated 30 minute

interval.

4. Backlight Button

5. Current Wind Speed

6. Wind Gust Icon

7. Peak Wind Speed

Highest speed from last 30 minutes or

calibrated 30 minute interval.

8. Current Indoor Temperature

Arrow icon indicates direction

temperature is trending.

9. Display Low Battery Indicator

10. Current Indoor Humidity

Arrow icon indicates direction

humidity is trending.

11. AUTO DIM Indicator

12. Clock

13. Date

14. 12 to 24 Hour Weather Forecast

Self-Calibrating Forecasting pulls data

from the outdoor sensor to generate

your personal forecast.

15. Multi-Variable History Chart

Displays the past 12 hours of data for

pressure, temperature and humidity.

16. REPLAY Button

For displaying historical data.

17. + Button

For setup preferences.

18. Learning Mode Icon

Disappears after weather forecast

self-calibration is complete.

19. SET Button

For setup preferences.

20. – Button

For setup preferences.

21. SELECT Button

Press to change the Weather Select

(#23) category being displayed.

22. Barometric Pressure

Arrow icon indicates direction

pressure is trending.

23. Weather Select

Displays heat index, dew point or wind

chill, daily, monthly, all time high & low

records indoor/outdoor temperatures

and humidity and high for wind speed.

24. REPLAY and LIVE Icons

REPLAY indicates historical data is

being displayed. LIVE icon is shown

while exiting REPLAY function.

25. Current Outdoor Temperature

Arrow icon indicates direction

temperature is trending.

26. Low Wind Speed

Lowest speed from past 30 minutes or

calibrated 30 minute interval.

27. Outdoor Sensor Signal Strength

BACK OF DISPLAY UNIT

28. Integrated Hang Hole

For easy wall mounting

29. Battery Compartment

30. A-B-C Switch

ID code that must match sensor’s A-B-C

switch to ensure units synchronize.

31. CLEAR RECORD/RESET Button

Press to clear record currently being

viewed. Press and HOLD for full reset

to factory defaults.

32. Battery Compartment Cover

33. Power adapter

• •

•

Display Unit Setup

Set the A-B-C Switch

Locate the A-B-C switch inside the

battery compartment. Set the A-B-C

switch to A, B or C. You must select

the same letter choices for both the

display unit and the sensor in order

for the units to synchronize.

2 Install or Replace Batteries

1. Remove the battery

compartment cover.

2. Insert 6 x AA alkaline batteries

into the battery compartment,

as shown. Follow the polarity

(+/-) diagram in the battery

compartment.

3. Replace the battery cover.

3 Plug Power Adapter into

Electric Outlet

A-B-C Switch

set to match sensor

A B C

2 Install Batteries

3 Plug in

Power

Adapter

6 AA Batteries

IMPORTANT: Batteries are a backup power source

to preserve records in the event of a power outage.

Power adapter is recommended as the primary power

source to enjoy the full functionality of this product.

PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE

WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.

BATTERY SAFETY: Clean the battery contacts and also those of the device prior to battery installation. Remove batteries from equipment which is not to be

used for an extended period of time. Follow the polarity (+/-) diagram in the battery compartment. Promptly remove dead batteries from the device. Dispose of used

batteries properly. Only batteries of the same or equivalent type as recommended are to be used. DO NOT incinerate used batteries. DO NOT dispose of batteries in ﬁre,

as batteries may explode or leak. DO NOT mix old and new batteries or types of batteries (alkaline/standard). DO NOT use rechargeable batteries. DO NOT recharge

non-rechargeable batteries. DO NOT short-circuit the supply terminals.

-8-

-,.-

-8-

·,r

Set the Time, Date & Units

Press the “SET” button, located on the front of the display unit, to enter SET

MODE. Once in set mode, the preference you are currently setting will blink on

the display.

To adjust the currently selected (ashing) item, press and release the “+“ or

“

“ buttons (press and HOLD to fast adjust).

To save your adjustments, press and release the “SET” button again to adjust

the next preference. The preference set order is as follows:

CLOCK HOUR

CLOCK MINUTE

CALENDAR MONTH

CALENDAR DATE

CALENDAR YEAR

TEMPERATURE UNITS (ºF or ºC)

WIND UNITS (MPH or KM/H)

PRESSURE UNITS (inHg or hPa)

You will automatically exit SET MODE if no buttons are pressed for 10 seconds.

Enter setup mode at any time by pressing the “SET” button.

Display Backlight Settings

This weather station’s color display features three different lighting settings:

High (100%) brightness, Medium (60%) brightness and Low (30%) brightness

Using battery power alone, the backlight is available momentarily for 10

seconds by pressing the “ ” button.

When display is powered with the power adapter, backlight remains on

at 100% brightness. Press “ ” button once to dim to 60% brightness;

press again to dim to 30%, press a 3rd time to enter “AUTO DIM” mode.

AUTO DIM appears above time and date.

AUTO DIM MODE: Automatically adjusts display brightness based on time of day & year.

MARCH 11- NOVEMBER 4 6:00 a.m. - 9:00 p.m. = 100% brightness

9:01 p.m. - 5:59 a.m.= 30% brightness

NOVEMBER 5 - MARCH 10 7:30 a.m. - 7:00 p.m.= 100% brightness

7:01 p.m. - 7:29 a.m. = 30% brightness

OPERATION

Placement for Maximum Accuracy

AcuRite sensors are sensitive to surrounding environmental conditions. Proper placement

of both the display unit and the sensor are critical to the accuracy and performance of

this product.

Display Unit Placement

Place the display unit in a dry area free of dirt and dust. To ensure

accurate temperature measurement, place out of direct sunlight and

away from heat sources or vents. Display unit stands upright for

tabletop use or is wall-mountable

Important Placement Guidelines

Display unit and sensor must be within 330 feet (100 m) of each other.

MAXIMIZE WIRELESS RANGE

Place units away from large metallic items, thick walls, metal surfaces, or other objects

that may limit wireless communication.

PREVENT WIRELESS INTERFERENCE

Place both units at least 3 feet (.9 m) away from electronic devices (TV, computer,

microwave, radio, etc.).

Using The Weather Center

Learning Mode

Self-Calibrating Forecasting use a unique algorithm to analyze changes in

pressure over a time period (called Learning Mode) to determine your altitude. After

14 days, the Learning Mode icon disappears from the display screen. At this point,

the self-calibrated pressure is tuned in to your location and the unit is ready for supe-

rior weather prediction.

Weather Forecast

AcuRite’s patented Self-Calibrating Forecasting provides your personal forecast of

weather conditions for the next 12 to 24 hours by collecting data from the sensor in

your backyard. It generates a forecast with pinpoint accuracy - personalized for your

exact location.

STORM

DEVELOPING

(Flashing)

SNOW

LIKELY

LIGHT RAIN

LIKELY

CLOUDY PARTLY

CLOUDY

SUNNY

View the complete list of icons at www.AcuRite.com/acurite-icons

Multi-Variable History Chart

The multi-variable history chart lets you monitor the change in conditions over the

past 12 hour time period (-12, -6, -3, -2, -1, 0). The chart automatically toggles

between barometric pressure, outdoor temperature and outdoor humidity readings.

Wind Speed

The Wind Speed area of the display features the CURRENT speed, as well as the

LOW, AVERAGE and PEAK wind speeds. PEAK, AVERAGE and LOW wind speeds

are based on the past 30 minute time frame by default. The time frame can be

adjusted during the calibration process (page 15).

Barometric Pressure

Subtle variations in barometric pressure greatly impact the weather. This weather

center displays the current pressure with an arrow icon to indicate the direction the

pressure is trending (FALLING, STEADY, or RISING). The multi-variable history chart

lets you monitor the change in pressure over time.

Weather Select

Weather Select displays data including wind chill, dew point, heat index, as well as

24 hour change, and high/low records for outdoor/indoor temperatures, humidity

and wind speed. To change the “Weather Select” category shown, press the

“SELECT” button on the front of the display. When outdoor/indoor temperature or

humidity is chosen, the display cycles through the category’s records in this order:

24 Hour Change

(amount the data has changed since 24 hours ago)

Today’s HIGH

Today’s LOW

Month’s HIGH

Month’s LOW

All Time HIGH

All Time LOW

When Wind Speed is chosen, the display cycles through the following records:

Today’s HIGH

Month’s HIGH

All Time HIGH

To clear a record, view one of the values listed above and press the “CLEAR

RECORD/RESET” button, located on the back of the unit in the battery compartment.

Dashes display to conﬁrm the record has been cleared.

REPLAY Historical Data

This weather station stores historical data that can be viewed in Replay Mode. Data

is recorded for the past 48 hours in 30 minute intervals (on the hour and half hour).

Historical data is shown with a time and date stamp.

Press the “REPLAY” button to enter Replay Mode. The REPLAY icon and options will be

shown on the display below the time.

REPLAY MODE OPTIONS:

• Press the “SET” ( ) button to view 48-hour historical data. First, data is shown

that was recorded 48 hours ago, and then the display cycles through the historical

data in 30 minute intervals up to the current time. To exit Replay Mode and view

live data, press the “REPLAY” button

• Press the “-” ( ) button to view historical data in 30 minute intervals previous to

the current “LIVE” data.

• While viewing historical data, press the “+” ( ) button to advance the data shown

by a 30 minute interval.

You will automatically exit Replay Mode if no buttons are pressed for 10 seconds. To

manually exit Replay Mode at any time, press the “REPLAY” button. The display may

show or ﬂash the “LIVE” icon to conﬁrm you are exiting Replay Mode and returning

to the current (“LIVE”) data view.

Care & Maintenance

Display Unit Care

Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives. Keep away from dust,

dirt and moisture. Clean ventilation ports regularly with a gentle puff of air.

Calibration

The indoor / outdoor temperature and humidity readings, wind speed interval, and barometric

pressure can be calibrated on the display unit to improve accuracy. Calibration can improve

accuracy when sensor placement or environmental factors impact the data accuracy.

1. To access calibration mode, press AND HOLD the “-“, “SET” and “+“ buttons simultaneously

for at least 5 seconds.

2. To adjust the currently selected (ﬂashing) item, press and release the “-“ or “+“ buttons to

calibrate the data value higher or lower from the actual reading.

3. To save your adjustments, press and release the “SET” button to adjust the next preference.

The “ ” icon will remain illuminated next to calibrated values.

The preference set order is as follows:

OUTDOOR TEMPERATURE

OUTDOOR HUMIDITY

INDOOR TEMPERATURE

INDOOR HUMIDITY

WIND SPEED INTERVAL (30, 60, 90, 120, 150 or 180 minutes)

BAROMETRIC PRESSURE (must be set to MANUAL mode to calibrate)*

*To change from AUTO to MANUAL pressure mode and vice versa, press AND HOLD

the “SET” button for at least 10 seconds. The display indicates the current pressure mode

selected,“AUTO” or “MANUAL”. After 10 seconds of inactivity, the display will save the

adjustments and exit calibration mode. Note: Calibration preferences will be erased if the

display is reset or if batteries are removed and the power adapter is unplugged.

Specications

TEMPERATURE RANGE Outdoor: -40ºF to 158ºF; -40ºC to 70ºC

Indoor: 32ºF to 122ºF; 0ºC to 50ºC

HUMIDITY RANGE Outdoor: 1% to 99%

Indoor: 1% to 99%

WIND SPEED 0 to 99 mph; 0 to 159 kph

WIRELESS RANGE 330 ft / 100 m depending on home construction materials

OPERATING FREQUENCY 433 mhz

POWER Display: 5V DC, 100mA power adapter

6 x AA alkaline batteries

Sensor: 4 x AA alkaline or lithium batteries

DATA REPORTING Wind Speed: 18 second updates

Outdoor temperature & humidity: 18 second updates

Indoor temperature & humidity: 60 second updates

If your AcuRite product does not operate properly,

visit www.AcuRite.com or call (877) 221-1252 for assistance.

For more information, visit our Knowledge Base at http://www.AcuRite.com/kbase

FCC Information

This device complies with part 15 of FCC rules. Operation is subject to the following two conditions:

1- This device may NOT cause harmful interference, and

2- This device must accept any interference received, including interference that may cause undesired operation.

WARNING: Changes or modiﬁcations to this unit not expressly approved by the party responsible for compliance could void the user’s authority to oper-

ate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits

are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio

or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modiﬁcations to this equipment. Such modiﬁcations

could void the user authority to operate the equipment.

This device complies with Industry Canada licence-exempt RSS standard(s).

Operation is subject to the following two conﬁtions:

(1) This device may not cause interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation of the device.

Inhaltsverzeichnis

Andere ACU-RITE Wetterstation Handbücher

ACU-RITE

ACU-RITE 01123 Bedienungsanleitung

ACU-RITE

ACU-RITE 02050CCDI Bedienungsanleitung

ACU-RITE

ACU-RITE 1025 Bedienungsanleitung

ACU-RITE

ACU-RITE 01021 Bedienungsanleitung

ACU-RITE

ACU-RITE 00828BPDI Bedienungsanleitung

ACU-RITE

ACU-RITE 01193M Bedienungsanleitung

ACU-RITE

ACU-RITE 06022 Bedienungsanleitung

ACU-RITE

ACU-RITE 433981 Bedienungsanleitung

ACU-RITE

ACU-RITE 00593W Bedienungsanleitung

ACU-RITE

ACU-RITE OO592W Bedienungsanleitung

ACU-RITE

ACU-RITE 75321A1 Bedienungsanleitung

ACU-RITE

ACU-RITE 13044 Bedienungsanleitung

ACU-RITE

ACU-RITE 01193M Bedienungsanleitung

ACU-RITE

ACU-RITE 06025RM Bedienungsanleitung

ACU-RITE

ACU-RITE 01536 Bedienungsanleitung

ACU-RITE

ACU-RITE 02048HD Bedienungsanleitung

ACU-RITE

ACU-RITE 02085 Bedienungsanleitung

ACU-RITE

ACU-RITE 00613 Bedienungsanleitung

ACU-RITE

ACU-RITE 00639W Bedienungsanleitung

ACU-RITE

ACU-RITE 01602BPDI Bedienungsanleitung

ACU-RITE

ACU-RITE 1525 Bedienungsanleitung

ACU-RITE

ACU-RITE 02016 Bedienungsanleitung

ACU-RITE

ACU-RITE 75077 Bedienungsanleitung

ACU-RITE

ACU-RITE 01604 Bedienungsanleitung

Beliebte Wetterstation Handbücher anderer Marken

Auriol

Auriol AHFL 433 A1 Bedienungsanleitung

Hyundai

Hyundai WS 2202 Bedienungsanleitung

NexSens

NexSens G2-HYDROMET Bedienungsanleitung

IROX

IROX HBVR761 UV-X Bedienungsanleitung

La Crosse Technology

La Crosse Technology C86371 Bedienungsanleitung

ADE

ADE WS 1711 Bedienungsanleitung

Auriol

Auriol z29592 Bedienungsanleitung

Auriol

Auriol 296289 Bedienungsanleitung

Hyundai

Hyundai WS 2266 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-2210 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-811561 Bedienungsanleitung

Ventus

Ventus W177 Bedienungsanleitung

National Geographic

National Geographic VA Colour RC Bedienungsanleitung

Levenhuk

Levenhuk Discovery Report WA40 Bedienungsanleitung

Instant Transmission

Instant Transmission MA 10410 Bedienungsanleitung

Lutron Electronics

Lutron Electronics PHB-318 Bedienungsanleitung

WAREMA

WAREMA EWFS Weather station eco Bedienungsanleitung

TFA

TFA 30.3013.IT Bedienungsanleitung