ADA INSTRUMENTS ZHT 125 Electronic Bedienungsanleitung

Operating manual

Moisture Meter

Model: ZHT 125 Electronic

Manufacturer Address: WWW. ADAINSTRUMENTS.COM

ZHT 125 Electronic

Table of contents

1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

2. Appearance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

3. Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

4. Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

5. Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

6. Warranty/Exceptions from responsibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Appendix 1. Warranty card

Appendix 2. Certificate of acceptance and sale

ZHT 125 Electronic 3

APPEARANCE

1) Protection cover

2) Pins

3) LCD screen

4) Mild moist indication LED

5) Dry indication LED

6) Measuring mode button

7) Power button

8) Excessive moist indication LED

9) Data hold button, keep pressing this button to close the

buzzer sound

10) At the back, it is battery compartment

11) Protection cap for pins

INTRODUCTION

ADA ZHT 125 Electronic moisture meter measures the moisture

content by detecting the electrical resistivity of the target mate-

rial using two pins. The unit has adopt low consumption single

chip smart design, the moisture content is displayed by LCD.

ZHT 125 Electronic has advantages of portable size, easy to oper-

ate and rapidly measuring, a suitable tool to carry at working field.

ZHT 125 Electronic

OPERATION

Install battery

Remove the battery lid on the back of the unit, place one 9V block battery (6F22 or 6LR61) according to the correct sign marked in

the compartment, then put back the lid.

Measure moisture

1) Pull out the protection cover A, remove the protection K from the pins;

2) Press the power button G to power on the unit, LOW LED turns on, LCD display ”__ __ __”; The default measuring mode is for

wood, use the button F to select the measuring mode.

3) Insert the two detection pins into target material;

4) Under wood mode, reading of the target wood is displayed on LCD screen, available range is 5%~50%. When it is lower than 5%,

LCD Screen Illustration

A) Low battery indication

B) Measuring result

C) Wood mode indication

D) Data hold indication

E) Building material mode indication

ZHT 125 Electronic 5

the screen shows” __ __ __”, when it is higher than 50%, the screen shows “ __ __ __ ”.

5) Under building material mode, reading of the target material is displayed on LCD screen, available range is 1.5%~33%. When it

is lower than 1.5%, the screen shows” __ __ __”, when it is higher than 33%, the screen shows “ __ __ __ ”.

6) Press the Hold button I during measuring, the symbol “HOLD” will display and hold the data, press again to make “HOLD”

disappear and exit data hold.

7) Keeping pressing the Hold button to turn off the buzzer sound during measuring.

8) Keeping pressing the power button for 2s to turn off the product.

LED indicators

In wood measurement mode: ●Blue LED——>5%-11.9%, Dry;

●Green LED——>12%-15.9%, mild moist;

●Red LED——>16%-50%, excessive moist.

In building materials measurement mode

●Blue LED——>5%-16.9%, Dry;

●Green LED——>17%-19.9%, mild moist;

●Red LED——>20%-33%, excessive moist

Calibration instructions

The product has external calibration function; Remove the protection cap, power on the unit, place the 2 pins into the 2 holes at the

back of the cover, just now the LCD shows a value between 18.2%±0.3%; If beyond this range, the accuracy has problem, advise

to be repaired.

● Operation notes

●Please replace the battery when the unit cannot be powered on or low battery indicator is on.

ZHT 125 Electronic

●Wood moisture values are related to ambient temperature humidity and wood material density. The best way to recognize the right

wood moisture content is to measure continuously day after day to obtain the corresponding values and compare to judge.

Cautions

● Don’t drop the product or use by force.

● Don’t disassemble the product to avoid failure.

● Keep the tool dry and clean,

● Don’t place the product with corrosive any gas or objects.

● Do not operate the tool in the water and dust, avoid to damage the tool.

● Check the battery regularity, avoid deterioration

● Remove the battery when not in use for an extended period of time.

SAFETY INSTRUCTIONS

Failure to follow the instructions listed below may cause personal injury.

● Please read this manual thoroughly before operation.

● Please do not remove any labels from the unit.

● Do not operate the tool with in the presence of flammable/explosive gases.

● Be careful about the pins.

● Don’t allow children to operate the unit.

● Put on the cover while not in use to avoid pins damage.

● The pins are very sharp, be sure to put on the protector after use, otherwise will hurt your body.

ZHT 125 Electronic 7

Battery Safety Instructions

●Please remove the battery when clean the product.

● Remove the battery when not in use for an extended period of time.

● Please install the batteries properly as the instructions of the positive and negative charges

● Please dispose the batteries properly. High temperature will cause explosions and do not burn the batteries. Strap insulated tape

around the battery charges to avoid unsafe contacts with other objects. Please follow the local regulations of battery disposing.

Measuring range

Wood: 5%~50%

Building materials: 1.5~33%

Measuring accuracy ±2%

Backlight shut off About 15 seconds

Auto power off 3 minutes inactive

Low battery indicator <7V

Power supply 1x9V block battery

(6F22 or 6LR6) not included

Working consumption <25mA

Working temperature 0°C~50°C

TECHNICAL DATA

Working humidity <90%RH non-condensing

Storage -20°C~60°C, ≤85% (w/o battery)

Dimension 145mm×62mm×27 mm

Weight About 86g (w/o battery)

ZHT 125 Electronic

Warranty

This product is warranted by the manufacturer to the original purchaser to be free from defects in material and workmanship under

normal use for a period of two (2) years from the date of purchase.

During the warranty period, and upon proof of purchase, the product will be repaired or replaced (with the same or similar model at

manufactures option), without charge for either parts of labour.

In case of a defect please contact the dealer where you originally purchased this product. The warranty will not apply to this product

if it has been misused, abused or altered. Withiut limiting the foregoing, leakage of the battery, bending or dropping the unit are

presumed to be defects resulting from misuse or abuse.

Exceptions from responsibility

The user of this product is expected to follow the instructions given in operators’ manual.

Although all instruments left our warehouse in perfect condition and adjustment the user is expected to carry out periodic checks of

the product’s accuracy and general performance.

The manufacturer, or its representatives, assumes no responsibility of results of a faulty or intentional usage or misuse including any

direct, indirect, consequential damage, and loss of profits.

The manufacturer, or its representatives, assumes no responsibility for consequential damage, and loss of profits by any disaster

(earthquake, storm, flood ...), fire, accident, or an act of a third party and/or a usage in other than usual conditions.

The manufacturer, or its representatives, assumes no responsibility for any damage, and loss of profits due to a change of data, loss

of data and interruption of business etc., caused by using the product or an unusable product.

The manufacturer, or its representatives, assumes no responsibility for any damage, and loss of profits caused by usage other thsn

explained in the users’ manual.

The manufacturer, or its representatives, assumes no responsibility for damage caused by wrong movement or action due to connect-

ing with other products.

WARRANTY DOESN’T EXTEND TO FOLLOWING CASES:

1. If the standard or serial product number will be changed, erased, removed or wil be unreadable.

2. Periodic maintenance, repair or changing parts as a result of their normal runout.

3. All adaptations and modifications with the purpose of improvement and expansion of normal sphere of product application, men-

tioned in the service instruction, without tentative written agreement of the expert provider.

4. Service by anyone other than an authorized service center.

5. Damage to products or parts caused by misuse, including, without limitation, misapplication or nrgligence of the terms of service

instruction.

6. Power supply units, chargers, accessories, wearing parts.

7. Products, damaged from mishandling, faulty adjustment, maintenance with low-quality and non-standard materials, presence of

any liquids and foreign objects inside the product.

8. Acts of God and/or actions of third persons.

9. In case of unwarranted repair till the end of warranty period because of damages during the operation of the product, it’s transpor-

tation and storing, warranty doesn’t resume.

For more information you can visit our website WWW.ADAINSTRUMENTS.COM

or write the letter with your questions on [email protected]

WARRANTY CARD

Name and model of the product ________________________________________________

Serial number ________________date of sale_______________________

Name of commercial organization _____________________stamp of commercial organization

Warranty period for the instrument explotation is 24 months after the date of original retail purchase.

During this warranty period the owner of the product has the right for free repair of his instrument in case of manufacturing defects.

Warranty is valid only with original warranty card, fully and clear filled (stamp or mark of thr seller is obligatory).

Technical examination of instruments for fault identification which is under the warranty, is made only in the authorized service center.

In no event shall manufacturer be liable before the client for direct or consewuential damages, loss of profit or any other damage which

occur in the result of the instrument outage.

The product is received in the state of operability, without any visible damages, in full completeness. It is tested in my presence. I have no

complaints to the product quality. I am familiar with the conditions of qarranty service and i agree.

purchaser signature _______________________________

Before operating you should read service instruction!

If you have any questions about the warranty service and technical support contact seller of this product

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere ADA INSTRUMENTS Messgerät Handbücher

ADA INSTRUMENTS

ADA INSTRUMENTS Schmidt Hammer 225 Bedienungsanleitung

ADA INSTRUMENTS

ADA INSTRUMENTS ZCM 130 Bedienungsanleitung

ADA INSTRUMENTS

ADA INSTRUMENTS ZHT 60 Bedienungsanleitung

ADA INSTRUMENTS

ADA INSTRUMENTS COSMO 70eter Bedienungsanleitung

ADA INSTRUMENTS

ADA INSTRUMENTS ROBOT-40 Bedienungsanleitung

ADA INSTRUMENTS

ADA INSTRUMENTS PRODIGIT MARKER Bedienungsanleitung

ADA INSTRUMENTS

ADA INSTRUMENTS PROF X15 Bedienungsanleitung

ADA INSTRUMENTS

ADA INSTRUMENTS ROTARY 500 HV SERVO Bedienungsanleitung

ADA INSTRUMENTS

ADA INSTRUMENTS CUBE 360 Bedienungsanleitung

ADA INSTRUMENTS

ADA INSTRUMENTS WHEEL 100M Bedienungsanleitung

ADA INSTRUMENTS

ADA INSTRUMENTS ZFM 100 Bedienungsanleitung

ADA INSTRUMENTS

ADA INSTRUMENTS 3D Liner 2V Green Bedienungsanleitung

ADA INSTRUMENTS

ADA INSTRUMENTS ProDigit MICRO Bedienungsanleitung

ADA INSTRUMENTS

ADA INSTRUMENTS WHEEL 50 DIGITAL Bedienungsanleitung

ADA INSTRUMENTS

ADA INSTRUMENTS ZHM 125B Bedienungsanleitung

ADA INSTRUMENTS

ADA INSTRUMENTS ProDigit 60 Bedienungsanleitung

ADA INSTRUMENTS

ADA INSTRUMENTS ProDigit MICRO Bedienungsanleitung

ADA INSTRUMENTS

ADA INSTRUMENTS A00481 Bedienungsanleitung

ADA INSTRUMENTS

ADA INSTRUMENTS AngleRuler Bedienungsanleitung

ADA INSTRUMENTS

ADA INSTRUMENTS COSMO MINI Bedienungsanleitung

ADA INSTRUMENTS

ADA INSTRUMENTS ProDigit MICRO Bedienungsanleitung

ADA INSTRUMENTS

ADA INSTRUMENTS WHEEL 100 DIGITAL Bedienungsanleitung

ADA INSTRUMENTS

ADA INSTRUMENTS DigiTeo-2 Bedienungsanleitung

ADA INSTRUMENTS

ADA INSTRUMENTS ZHT 100 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung