Adam Equipment CBC SERIES Bedienungsanleitung

Adam Equipment

CBC&CBC-M SERIES

(P.N. 3026610534, Revision A3, July 2013)

Adam Equipment strives to be more environmentally focused and uses recycled materials and

environmentally friendly packaging where possible. As part of this initiative we have developed a short form

manual that uses less paper and ink to describe the main functions of your new Adam scale. A complete

version is available at www.adamequipment.com. Thank you for your support of Adam Equipment and we

hope that you enjoy your new scale.

1.0 CONTENTS

2.0 OPERATION.............................................................................................................3

2.1 SETTING UP AND TURN ON THE SCALE........................................................3

2.2 ZEROING THE DISPLAY......................................................................................3

2.3 TARING ................................................................................................................3

2.4 SETTING THE WEIGHING UNIT (CBCa Series only)..........................................4

2.5 PARTS COUNTING .............................................................................................4

2.6 CHECK COUNTING..............................................................................................4

2.7 ACCUMULATED TOTALS....................................................................................4

3.0 RS-232 INTERFACE ................................................................................................6

4.0 PARAMETERS.........................................................................................................6

4.1 AUTO SLEEP FUNCTION ...................................................................................6

5.0 CBC PARAMETERS.................................................................................................7

6.0 CALIBRATION..........................................................................................................7

7.0 BATTERY AND BACKLIGHT OPERATION .............................................................8

7.1 BATTERY..............................................................................................................8

7.2 BACKLIGHT FOR LCD .........................................................................................8

8.0 SPECIFICATIONS....................................................................................................9

9.0 ERROR CODES .....................................................................................................12

10.0 SERVICE INFORMATION......................................................................................13

2.0 OPERATION

2.1 SETTING UP AND TURN ON THE SCALE

The CBC, CBC-M series of scales provide an accurate, fast and versatile series of counting and check-

weighing scales. For the first time, you should set up your scale as follows:

Gently Place the platform in the locating holes on the top cover. Level the scale by adjusting the four feet.

The scale should be adjusted such that the bubble in the spirit level is in the centre of the level and the scale

is supported by all four feet.

Attach the power supply cable to the connector on the right side of the scale base. Plug in the power supply

module. The power switch is located at the right side of the scale base. The scales have three digital display

windows. There are “Weight”, “Unit Weight” and “Count” which show the total weights, unit weight and

the numbers of the items.

For CBCa, there are indicators for lb & kg

The scale will show the model No in the “Weight” display window (e.g: CBC 30- where 30 denotes the

maximum capacity of the scale in Kg) and the current hardware and software revision numbers in the “Unit

Weight” display window .Next a self-test is followed. At the end of the self-test, it will display

“0”

in all three

displays, if the zero condition has been achieved.

2.2 ZEROING THE DISPLAY

You can press the [Zero] key at any time to set the zero point. When the zero point is obtained the “Weight”

display will show the indicator for zero. The scale has an automatic re-zeroing function to account for minor

drifting or accumulation of material on the platform. However you may need to press [Zero] to re-zero the

scale if small amounts of weight are still shown when the platform is empty.

2.3 TARING

Steps:

1) Zero the scale by pressing the [Zero] key if necessary. Place a container on the platform, a value for

its weight will be displayed.

2) Press the [Tare] key to tare the scale. The display will show the zero and the indicator above “Net” will

be on. As a product is added only the weight of the product will be shown. The scale could be tared a

second time.

3) When the container is removed a negative value will be shown. The indicator above “Zero” will also be

on because the platform is back to the same condition as it was when the [Zero] key was pressed

last.

2.4 SETTING THE WEIGHING UNIT (CBCa Series only)

CBC,CBC-M scales are kilogram only scales but the CBCa scales are changeable from pounds to kilograms.

The scale will turn on displaying the last weighing unit selected, either kilograms or pounds. To change the

weighing unit press the [U. Wt./Units] key when the “Unit Weight” display shows zero. If necessary press

the [CE] key to clear the unit weight before changing.

2.5 PARTS COUNTING

To determine the number of items being weighed, should divided the net weight by the unit weight value. It

is necessary to know the average weight of the items to be counted which can be done by weighing a known

number of the items or by manually inputting a known unit weight using the keypad.

Weighing a sample to determine the Unit Weight

1) Zero the scale by pressing the [Zero] key if necessary. If a container is to be used, place the

container on the scale and tare as discussed earlier.

2) Place a known quantity of items on the scale. After the weight display is stable, enter the

quantity of items using the numeric keys followed by pressing the [Smpl] key.

3) The number of units will be displayed on the "Count" display and the computed average

weight will be shown on the "Unit Weight" display.

Or Entering a known Unit Weight

1) Enter the value of the unit weight using the numeric keys followed by pressing the

[U. Wt./Units] key. The "Unit Weight" display will show the value as it was entered.

After calculate/enter the unit weight, you should add more items on the pan. As more items are added to the

scale, the weight and the quantity will increase. If a quantity which is smaller than the sample is placed, then

the scale will automatically enhance the Unit Weight by re-calculating it. To lock the Unit Weight and avoid re-

sampling, press [U. Wt./Units].

The scales will automatically update the unit weight when a sample less than the sample already on the

platform is added. A beep will be heard when the value is updated. It is wise to check the quantity is correct

when the unit weight has been updated automatically. This feature is turned off as soon as the number of

items added exceeds the count used as a sample.

2.6 CHECK COUNTING

Check counting is a procedure to cause an alarm to sound when the number of items counted on the

scale meets or exceeds a number stored in the memory.

1) Enter the numeric value to be stored using the numeric keys. Then press the [Pst] key to

store the value.

2) To clear the value from the memory and thereby turn off the check-weighing feature, enter

the value "0" and press [Pst].

2.7 ACCUMULATED TOTALS

Manually accumulated totals

1) The values (weight and count) shown on the display can be added to the values in the

accumulator by pressing the [M+] key. The total weight, total count and number of times will

show in the “Weight”, “Count”, “Unit weight” display separately. The values will be displayed

for 2 seconds before returning to normal.

2) More products can then be added and the [M+] key to be pressed again. This can continue for

up to 99 entries or until the capacity of the “Weight” display is exceeded.

3) To observe the total stored value, press the [MR] key. The total will be displayed for 2 seconds.

To clear the memory- first press [MR] to recall the totals from memory and then press the [CE]

key to clear all values from the memory.

Automatic accumulated totals

The scale can be set to automatically accumulate totals when a weight is placed on the scale. However the

[M+] key is still active and can be pressed to store the values immediately. In this case the values will not be

stored when the scale returns to zero. To enable this function please see the complete manual for details

NOTE: The scale must return to zero or a negative number, before another sample can be added to the

memory.

3.0 RS-232 INTERFACE

The CBC and CBC-M Series of scales can be ordered with a bi-directional RS-232 interface. The scale when

connected to a printer or computer through the RS-232 interface, outputs the weight with the selected

weighing unit.

Specifications:

Connector:

4.0 PARAMETERS

For CBC-M scales, it is necessary to enter a secure menu using a password to set some parameters. The

parameters for the RS-232 interface, real time clock and the accumulation function can be set by the user.

Please see details in the complete manual.

4.1 AUTO SLEEP FUNCTION

This function may be enabled or disabled by the user. If enabled, when the scale is not used for some time

(as pre-set by the user under this function) it automatically switches off. To set this parameter-

During self-checking, press [Zero] and release at once. The display shows

“SLEEP nodE”

. Press [U. Wt./Units]

key to scroll through the auto sleep values.

“0” Auto sleep mode disabled

“1” Auto sleep after 1 minute

“5” Auto sleep after 5 minutes

“10” Auto sleep after 10 minutes

Press [Tare] to set the value. The scale returns to zero.

RS-232 output of weighing data

ASCII code

Adjustable Baud rate: 600, 1200, 2400, 4800, 9600 and 19200 baud

8 data bits

No Parity

9 pin d-subminiature socket

Pin 3 Output

Pin 2 Input

Pin 5 Signal Ground

5.0 CBC PARAMETERS

To enter the parameter menus press [Tare] once, during the initial counting of the display after the power is

turned on. The “Weight” display will show

"PIn "

requesting the password number to be entered.

The default password is

"0000"

but other numbers can be set using the parameter menus. Press the [0] key

four times. Press the [Tare] key.

The Parameter menu has 2 functions that can be accessed using the [U. Wt./Units] key to cycle through the

choices. The “Weight” display will show the name of the functions. To enter a function, press the [Tare]

key. At any time you can press the [Zero] key to return to weighing.

Weight Display Description

F1 CAL

See the Calibration section for details.

F2 PIn

Set a new password number. Display will show "Pln 1 "

Enter the new password number then press the [Tare] key.

Display will change to "Pln 2 ", Enter the password again and press [Tare] again.

The display will show "donE" to show the new password has been accepted.

Record the new password number in a secure place.

6.0 CALIBRATION

The CBC-M approved scales are sealed to prevent unauthorised calibration. Contact Adam Equipment or your

supplier for more details.

The CBC scales are calibrated using metric weights and the CBCa scales can be calibrated using either metric

or pound weights, depending on the unit in use before calibration.

Steps:

1) Press the [Tare] key once, during the initial counting of the display after the power is turned on.The

“Weight” display will show

"PIn "

requesting the password number to be entered.

2) The default password is

"0000"

but other numbers can be set using the parameter menus. Press the

[0] key four times and press the [Tare] key.

3) The parameter menu shows

"F1 CAL"

. Press [Tare] to enter the Calibration section.

4) The display will then show

"unLoAd"

to request all weight be removed from the platform. Press the

[Tare] key to set the zero point.

5) The displays will then show the calibration weight suggested as a whole number. For example:

“LoAd” “04” “KiLoS”

Either put this weight on the platform after the stable symbol is on or enter the desired value in whole integer

and then press [Tare].

Place the weight on the platform and press [Tare] again.

6) At all times the scale should be stable before pressing the [Tare] key to accept a weight. The

stability indicator will turn on to show the value is stable.

7) When calibration is done the display will show

“SPAn” “PASS”

and the scale will start counting from 0

to 9 before returning to normal operation.

8) If an error message

“SPAn” “FAIL”

is displayed, then re-check the calibration and repeat the process, if

necessary.

Suggested Calibration weights for CBC Series:

CBC 4 /

CBC 8a CBC 8 /

CBC 16a CBC 16 /

CBC 35a CBC 32 /

CBC 70a CBC 48 /

CBC 100a

2 kg / 5 Ib

4 kg / 10 lb

10 kg / 30 lb

20 kg / 50 lb

30 kg / 100 lb

After calibration, the scale should be checked whether the calibration and linearity is correct. If necessary

repeat calibration, ensure that the scale is stable before accepting any weight.

7.0 BATTERY AND BACKLIGHT OPERATION

7.1 BATTERY

The scales can be operated from the battery, if desired. the battery life of the CBC and CBC-M series is 90

hours. When the battery needs charging the arrow above the low battery symbol under the “Weight” display

will turn on. The scale will still operate for about 10 hours after which it will automatically switch off to protect

the battery.

To charge the battery, simply plug the power supply module into the scale and switch the main power ON.

The scale does not need to be turned on.

The battery should be charged for 12 hours for full capacity.

7.2 BACKLIGHT FOR LCD

The backlight of the LCD can be set to be ON full time, only when a weight is on the scale or can be turned

off.

1) To set the backlight press and hold [Pst] key for 4 seconds.The weight display will show

“EL xx”

where xx is the current setting for the backlight.

2) Press [U. Wt./Units] to set the parameter.

“EL Au”

Sets the backlight to operate automatically when a weight is

placed on the scale or a key is pressed.

“EL OFF”

Sets the backlight to be off.

“EL on”

Sets the backlight to be on at all times.

3) Press the [Tare] key to store the value or press the [Zero] key to escape from this setting and return

to weighing.

8.0 SPECIFICATIONS

CBC SERIES

Model # CBC 4 CBC 8 CBC 16 CBC 32

CBC 48

Maximum

Capacity 4000 g 8000 g 16kg 32 kg

48 kg

Readability 0.1 g 0.2 g 0.0005 kg 0.001 kg

0.002 kg

Tare Range -4000 g -8000 g -9.9995 kg -32 kg -48 kg

Repeatability

(Std Dev) 0.1 g 0.2 g 0.0005 kg

0.001 kg

0.002 kg

Linearity ± 0.2 g 0.4 g 0.001 kg

0.002 kg

0.004 kg

Units of

Measure g kg

CBCa SERIES

Model: CBC 8a

UNITS OF

MEASURE MAXIMUM

CAPACITY TARE

RANGE READABILITY

REPEATIBILITY LINEARITY

Grams 4000 g -4000 g 0.1 g 0.1 g 0.2 g

Pounds 8.0000 lb -8 lb 0.0002 lb 0.0002 lb 0.0004 lb

Model: CBC 16a

UNITS OF

MEASURE MAXIMUM

CAPACITY TARE

RANGE READABILITY

REPEATIBILITY LINEARITY

Grams 8000 g -8000 g 0.2 g 0.2 g 0.4 g

Pounds 16.0000 lb -9.9995 lb 0.0005 lb 0.0005 lb 0.001 lb

Model: CBC 35a

UNITS OF

MEASURE MAXIMUM

CAPACITY TARE

RANGE READABILITY

REPEATIBILITY LINEARITY

Kilograms 16.0000 kg -10 kg 0.0005 kg 0.0005 kg 0.001 kg

Pounds 35.000 lb -35 lb 0.001 lb 0.001 lb 0.002 lb

Model: CBC 70a

UNITS OF

MEASURE MAXIMUM

CAPACITY TARE

RANGE READABILITY

REPEATIBILITY LINEARITY

Kilograms 32.000 kg -32 kg 0.001 kg 0.001 kg 0.002 kg

Pounds 70.000 lb -70 lb 0.002 lb 0.002 lb 0.004 lb

Model: CBC 100a

UNITS OF

MEASURE MAXIMUM

CAPACITY TARE

RANGE READABILITY

REPEATIBILITY LINEARITY

Kilograms 48.000 kg -48 kg 0.002 kg 0.002 kg 0.004 kg

Pounds 100 lb -99 lb 0.005 lb 0.005 lb 0.01 lb

COMMON SPECIFICATIONS

Stabilisation

Time 2 Seconds typical

Operating

Temperature -10°C - 40°C

14°F - 104°F

Power supply 230 VAC 50/60 Hz

120 VAC available

Battery Internal rechargeable battery

(~90 hours operation)

Calibration Automatic External

Display 3 x 6 digits LCD digital displays

Balance

Housing ABS Plastic, Stainless Steel platform

Pan Size 225 x 275mm

8.9” x 10.8”

Overall

Dimensions

(wxdxh)

315 x 355 x 110mm

12.4” x 14” x 4.3”

Net Weight 4.4 kg / 9.7lb

Applications Counting Scales

Functions Parts counting, check-counting, weighing, accumulating memory,

pre-set count with alarm

Interface RS-232 bi-directional interface

English, German, French, Spanish selectable text

Date/Time Real Time Clock (RTC),

To print date and time information

(Dates in year/month/day, day/month/year or

month/day/year formats- Battery backed)

Andere Handbücher für CBC SERIES

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Adam Equipment Skala Handbücher

Adam Equipment

Adam Equipment WSK 8 Bedienungsanleitung

Adam Equipment

Adam Equipment HIGHLAND SERIES Bedienungsanleitung

Adam Equipment

Adam Equipment Nimbus NBL Serie Bedienungsanleitung

Adam Equipment

Adam Equipment MUW 300L Bedienungsanleitung

Adam Equipment

Adam Equipment CB Balance Bedienungsanleitung

Adam Equipment

Adam Equipment CBD Series Bedienungsanleitung

Adam Equipment

Adam Equipment CBK series Bedienungsanleitung

Adam Equipment

Adam Equipment WBW Series Bedienungsanleitung

Adam Equipment

Adam Equipment Nimbus NBL Series Bedienungsanleitung

Adam Equipment

Adam Equipment MTB Bedienungsanleitung

Adam Equipment

Adam Equipment BFW 75 Bedienungsanleitung

Adam Equipment

Adam Equipment AQ Series Bedienungsanleitung

Adam Equipment

Adam Equipment AZplus Series Bedienungsanleitung

Adam Equipment

Adam Equipment DUNE SERIES Bedienungsanleitung

Adam Equipment

Adam Equipment CBK series Bedienungsanleitung

Adam Equipment

Adam Equipment LHS Series Bedienungsanleitung

Adam Equipment

Adam Equipment Cruiser Count Series Bedienungsanleitung

Adam Equipment

Adam Equipment AZplus Series Bedienungsanleitung

Adam Equipment

Adam Equipment MDW Bedienungsanleitung

Adam Equipment

Adam Equipment PGL SERIES Bedienungsanleitung

Adam Equipment

Adam Equipment AQT Series Bedienungsanleitung

Adam Equipment

Adam Equipment HIGHLAND HCB123 Bedienungsanleitung

Adam Equipment

Adam Equipment GBC Series Bedienungsanleitung

Adam Equipment

Adam Equipment ABK Series Bedienungsanleitung

Beliebte Skala Handbücher anderer Marken

AWS

AWS ZEO-50 Bedienungsanleitung

Gima

Gima Glass Body Fat Analyzer Stücklistenhandbuch

Seca

Seca 374 Bedienungsanleitung

TEC

TEC TEC SL59 SERIES Bedienungsanleitung

Axis

Axis B/E Series Bedienungsanleitung

Alecto

Alecto ACW-40 Bedienungsanleitung

Rice Lake

Rice Lake MSI-4260 IS Bedienungsanleitung

IKA

IKA RCT basic safety control Bedienungsanleitung

ADE

ADE M20011 Bedienungsanleitung

Duronic

Duronic KS3000 Bedienungsanleitung

Digi

Digi SM-720 Bedienungsanleitung

Cardinal

Cardinal CS Series Bedienungsanleitung

Korona

Korona Kastella Bedienungsanleitung

A&D

A&D FC-50Ki Bedienungsanleitung

BDA

BDA CAMARGUE Bedienungsanleitung

Tanita

Tanita HD-357 Bedienungsanleitung

Leifheit

Leifheit 03173 Bedienungsanleitung

Lumme

Lumme LU-1340 Bedienungsanleitung