Adam Equipment LHS Series Bedienungsanleitung
© Adam Equipment Company 2012
Adam Equipment
LHS/LHSa SERIES (EN)
SERIE LHS (FR)
LHS SERIE (DE)
SERIE LHS/LHSa (ES)
SERIE LHS (IT)
(P.N. 7.00.6.6.0200, Revision B November 2012)
oftware version L1.1/LA1.1
C O P Y
© Adam Equipment Company 2012
ENGLISH: P 1 - 13
FRANÇAIS: P 14 - 27
DEUTSCH: P 28 - 41
ESPAÑOL: P 42 - 55
ITALIANO: P 56 - 69
EU DECLARATION: P 70
C O P Y
EN
© Adam Equipment Company 2012 1 700660200RevB-Nov2012
1.0 CONTENTS
1.0 CONTENTS.......................................................................................1
2.0 INTRODUCTION..............................................................................2
2.1 FEATURES....................................................................................2
2.2 TECHNICAL SPECIFICATIONS.....................................................3
2.3 SAFETY NOTICE...........................................................................4
2.4 KEY AND PANEL DESCRIPTION..................................................5
2.5 DISPLAY INDICATIONS WITH LED...............................................6
3.0 OPERATION.....................................................................................6
3.1 SAFETY INSTRUCTIONS..............................................................6
3.2 BATTERY OPERATION.................................................................7
3.3 BASIC OPERATIONS ....................................................................8
3.4 REMOTE CONTROL UNIT ............................................................9
3.5 USER PARAMETERS....................................................................9
4.0 CALIBRATION.................................................................................10
5.0 PARTS LIST....................................................................................11
WARRANTY INFORMATION ..................................................................13
C O P Y
EN
© Adam Equipment Company 2012 2 700660200RevB-Nov2012
2.0 INTRODUCTION
2.1 FEATURES
The LH /LH a eries are a range of heavy-duty lower capacity crane scales
The main features include:
•Easy Operation & Rugged construction
•25mm bright red LED display enabling a good viewing angle.
•360 degree rotary safety hook and support ring design
•Overload safety up to 150% of model capacity
•electable weighing units of kg, Lbs and Newtons (Newtons not
available for “a” models)
•tandard and Peak Hold feature
•Internal rechargeable battery fitted as standard
•Auto power off after 30 minutes of non use
•6Vdc 600ma battery charger
•trong Die cast Alluminium housing
•Infrared remote control
C O P Y
EN
© Adam Equipment Company 2012 3 700660200RevB-Nov2012
2.2 TECHNICAL SPECIFICATIONS
M
odel No
Capacit
Division
M
odel No
Capacit
Division
LHS-500 500kg 0.1kg LHS-1000a 1000lb/500kg 0.2lb/0.1kg
LHS-1500 1500kg 0.2kg LHS-3000a 3000lb/1500kg
0.5lb/0.2kg
LHS-2000 2000kg 0.5kg LHS- 4000a 4000lb/2000kg
1lb/0.5kg
C O P Y
EN
© Adam Equipment Company 2012 4 700660200RevB-Nov2012
2.3 SAFETY NOTICE
The limit stated below is the Ultimate Overload Limits of the scales.
Adam Equipment Co. Ltd. Its directors, owners and affiliated companies and
organisations cannot be held liable for any resulting damage or injury sustained as a
result of the machines being used in excess of their stated capacities or ultimate
overload limits.
Model No. LHS 500/1000a LHS 1500/3000a LHS 2000/4000a
Max
capacit 500kg/1000lb 1500kg/3000lb 2000kg/4000lb
Overload
capacit 750kg/1500lb 2000kg/4000lb 2500kg/5000lb
NOTICE:
Do not use the scales if any parts are bent or loose or show signs of damage or wear.
Refer to the user manual.
C O P Y
EN
© Adam Equipment Company 2012 5 700660200RevB-Nov2012
2.4 KEY AND PANEL DESCRIPTION
[ON/OFF] The power switch is located on the rear housing. Use this key to
turn the scale ON and OFF.
[Zero] Press the [Zero] key to return the reading to zero.
[Unit]
Press the [Unit] key to change the weighing unit being displayed
between Kg, Lbs and Newtons (Newtons not available for “a”
models)
[Hold]
Use this key to activate standard Hold. When pressed, the Hold
LED will light at the top left side of the display and the reading on
the display will lock and flash. Press the [Hold] key again to
cancel the [Hold] function.
*When Peak hold is selected from the parameter section the
press of the Hold key will activate Peak Hold. The Hold LED will
flash and the display will also flash and lock showing the
maximum weight registered of a single weighing process.
Press the [Hold] key again to cancel the [Hold] function.
C O P Y
EN
© Adam Equipment Company 2012 6 700660200RevB-Nov2012
2.5 DISPLAY INDICATIONS WITH LED
Kg lb N The LED will light up in the weighing unit that is being used to
indicate when the weight is stable.
Hold Hold Indicator
3.0 OPERATION
3.1 SAFETY INSTRUCTIONS
Read this manual carefully before you operate the H Crane cale.
•Unpack the Crane cale carefully from the packaging.
•Attach it to your hoist or equivalent existing equipment securely at the
ground level to the support ring in the upright position. Make sure that
the equipment to which the scale is attached is in proper condition. The
operator should be trained for its safe operation.
•Carry out regular visual inspection for any damage or wear and tear on
parts. The split pins in particular at the hook and eyebolts, as well as the
inner wall of the hook and all joints should be checked regularly. If any
damage or wear has taken place, stop using the scale and replace the
parts.
•Do all inspection and maintenance work when the scale is not in use.
•Do not expose the scale to extreme temperatures. The operating
temperature range is 0° C to 40° C.
•ecure the sample to be weighed in the hook of the scale. Ensure that
the sprung afety Lever returns to its resting position which prevents
the sample from slipping out of the hook.
•Do not exceed the maximum capacity of the cale.
•Clean and protect your scale after use.
C O P Y
EN
© Adam Equipment Company 2012 7 700660200RevB-Nov2012
Overload Warning
Please do not add any item that exceeds the maximum capacity of the scale.
When the display shows ”- - - - - ”, remove the item to avoid damage to the load
cell and scale.
3.2 BATTERY OPERATION
•The rechargeable battery will operate continuously for between 20 and
30 hours before requiring recharging.
•To charge the battery, plug the charger unit into the socket as marked
on the rear of the scale. Plug the charger into the mains power supply
and wait until the LED on the charger shows green. The battery is now
fully charged.
•Charging time for a completely discharged battery is approximately 16
hours. A full battery pack is recommended to keep the scale
continuously operational.
•Only use the charger as supplied with the unit.
•The scale will automatically power down after 30 minutes of non use to
further protect the battery.
•To replace the battery, turn the locking screw on the battery cover 90
degrees clockwise and lift open the cover. Disconnect and remove the
old battery and replace with a new one.
•Contact your dealer for a replacement battery.
C O P Y
EN
© Adam Equipment Company 2012 8 700660200RevB-Nov2012
3.3 BASIC OPERATIONS
Power on and off
Press the [ON/OFF] button to turn the scale on or off. The display on the scale
will show the model capacity then countdown from 9 to 0 before displaying zero
weight.
Zero the scale
Press the [Zero] ke so that the display shows zero.
Change the weighing Unit
Press the [Unit] key to change the weighing unit
tandard Hold (setting 1)
When the reading may not be perfectly stable or you cannot view a reading
easily you can press the [Hold] key to lock it. The reading will be locked and also
flash at the point you press the [Hold] button enabling you to view it when you
can. The Hold LED will also light up and once you have noted the reading a press
of the [Hold] key will return the scale to the normal weighing mode.
Peak Hold (setting 0)
Peak Hold is the highest weight reading registered by the scale when a weighing
takes place. Press the [Hold] key when the display is at zero and the Hold LED
will flash which denotes Peak Hold has been activated. When weight/force is
applied to the scale the display will also flash and lock the highest recorded
weight of that weighing process. This value and the Hold LED will remain flashing
on the display until the [Hold] key is pressed again at which point the scale will
return to normal weighing mode displaying the current weight on the scale.
Press [Hold] again to perform another Peak Hold weighing at any time.
C O P Y
Andere Handbücher für LHS Series
1
Dieses Handbuch passt für folgende Modelle
4
Inhaltsverzeichnis
Sprachen:
Andere Adam Equipment Skala Handbücher
Adam Equipment
Adam Equipment ACB-600H Bedienungsanleitung
Adam Equipment
Adam Equipment HIGHLAND HCB 602M Bedienungsanleitung
Adam Equipment
Adam Equipment Nimbus NBL Serie Bedienungsanleitung
Adam Equipment
Adam Equipment MIW-20 Bedienungsanleitung
Adam Equipment
Adam Equipment BCT Series Bedienungsanleitung
Adam Equipment
Adam Equipment CRW Series Bedienungsanleitung
Adam Equipment
Adam Equipment CB 501 Bedienungsanleitung
Adam Equipment
Adam Equipment PGL SERIES Bedienungsanleitung
Adam Equipment
Adam Equipment CBC SERIES Bedienungsanleitung
Adam Equipment
Adam Equipment CPW 25 Bedienungsanleitung
Adam Equipment
Adam Equipment MTB Bedienungsanleitung
Adam Equipment
Adam Equipment GBC Series Bedienungsanleitung
Adam Equipment
Adam Equipment IHS Series Bedienungsanleitung
Adam Equipment
Adam Equipment SWZ 6D Bedienungsanleitung
Adam Equipment
Adam Equipment MDW - 300L Bedienungsanleitung
Adam Equipment
Adam Equipment CB 501 Bedienungsanleitung
Adam Equipment
Adam Equipment CQT1751GR Bedienungsanleitung
Adam Equipment
Adam Equipment CBD 100a Bedienungsanleitung
Adam Equipment
Adam Equipment GBC Series Bedienungsanleitung
Adam Equipment
Adam Equipment HIGHLAND SERIES Bedienungsanleitung
