ADJ Micro Galaxian Bedienungsanleitung

User Instructions

©American DJ® - www.americandj.com - Micro Galaxian Instruction Manual Page 2

Unpacking: Thank you for purchasing the Micro Galaxian by Ameri-

can DJ®. Every Micro Galaxian has been thoroughly tested and has

been shipped in perfect operating condition. Carefully check the ship-

ping carton for damage that may have occurred during shipping. If the

carton appears to be damaged, carefully inspect your xture for any

damage and be sure all equipment necessary to operate the unit has

arrived intact. In the event damage has been found or parts are miss-

ing, please contact our toll free customer support number for further

instructions. Please do not return this unit to your dealer without con-

tacting customer support rst.

Introduction: The Micro Galaxian is an simple, small, bright, green

and red laser fixture. The Micro Galaxian is a stand alone fixture with 2

operating modes. For best results use fog or special effects smoke to

enhance the beams projections.

Customer Support: American DJ® provides a toll free customer sup-

port line, to provide set up help and to answer any question should

you encounter problems during your set up or initial operation. You

may also visit us on the web at www.americandj.com for any com-

ments or suggestions. For service related issue please contact Ameri-

can DJ®. Service Hours are Monday through Friday 9:00 a.m. to 5:00

p.m. Pacic Standard Time.

Voice: (800) 322-6337

Fax: (323) 582-2941

E-mail: [email protected]

To purchase parts online visit http://parts.americandj.com

Warning! To prevent or reduce the risk of electrical shock or re, do

not expose this unit to rain or moisture.

Caution! There are no user serviceable parts inside this unit. Do not

attempt any repairs yourself, doing so will void your manufactures war-

ranty. In the unlikely event your unit may require service please contact

American DJ customer support.

PLEASE recycle the shipping carton whenever possible.

Micro Galaxian General Introduction

11/10

©American DJ® - www.americandj.com - Micro Galaxian Instruction Manual Page 4©American DJ® - www.americandj.com - Micro Galaxian Instruction Manual Page 3

Please carefully read and understand the instructions in this manual

thoroughly before attempting to operate this unit. These instructions

contain important safety information regarding the use and mainte-

nance of this unit. Please keep this manual with the unit, for future

reference.

CAUTION IMPORTANT! When installing this projector, make sure

that it is mounted in a manner that prevents the audience from

looking directly into the beam, and the beam from striking the

audience.

Micro Galaxian General Instructions Micro Galaxian Safety Precautions

• To reduce the risk of electrical shock or re, do not expose this unit

rain or moisture.

• Do not spill water or other liquids into or on to your unit.

• Do not attempt to remove or break off the ground prong from the

electrical cord. This prong is used to reduce the risk of electrical

shock and re in case of an internal short. Do not attempt to oper-

ate this unit if the power cord has been frayed or broken.

• Disconnect from main power before making any type of connection.

• Do not remove the cover under any conditions. There are no user

serviceable parts inside.

• Always be sure to mount this unit in an area that will allow proper

ventilation. Allow about 6” (15cm) between this device and a wall.

• Do not attempt to operate this unit, if it becomes damaged.

• This unit is intended for indoor use only, use of this product out-

doors voids all warranties.

• During long periods of non-use, disconnect the unit’s main power.

• Always mount this unit in safe and stable matter.

• Power cords should be routed so they are not likely to be walked

on, pinched by items placed upon or against them.

• Cleaning -The fixture should be cleaned only as recommended by

the manufacturer. See page 9 for cleaning details.

• Heat -The appliance should be situated away from heat sources

such as radiators, heat registers, stoves, or other appliances

(including amplifiers) that produce heat.

• The fixture should be serviced by qualified service personnel when:

A. The power-supply cord or the plug has been damaged.

B. Objects have fallen, or liquid has been spilled into the unit.

C. The unit has been exposed to rain or water.

D. The unit does not appear to operate normally or exhibits a

marked change in performance.

• 30mW Green Laser

• 80mW Red Laser

• 2 Operating Modes - Sound Active Mode & Auto Mode

• Infrared Remote Control (Included)

• Dual Hanging Bracket

Micro Galaxian Features

Micro Galaxian Warranty Registration

The Micro Galaxian carries a 90 day limited warranty. Please fill out

the enclosed warranty card to validate your purchase. All returned

service items whether under warranty or not, must be freight pre-

paid and accompany a return authorization (R.A.) number. If the unit

is under warranty you must provide a copy of your proof of purchase

invoice. Please contact American DJ® customer support for a R.A.

number.

DANGER

VISIBLE LASER RADIATION

-AVOID DIRECT EYE EXPOSURE

LASER DIODE

WAVELENGTH : 635~650 nm

Max Output : <4.9mW

Class IIIa Laser Product

©American DJ® - www.americandj.com - Micro Galaxian Instruction Manual Page 5 ©American DJ® - www.americandj.com - Micro Galaxian Instruction Manual Page 6

Micro Galaxian Laser Warnings and Safety

NON-INTERLOCKED HOUSING WARNING

The Micro Galaxian contains high power laser devices internally. Do

not open the laser housing, due to the potential exposure to unsafe

levels of laser radiation. The laser power levels, if the unit is opened,

can cause instant blindness, skin burns and res.

STOP AND READ ALL LASER SAFETY DATA

OPERATION INSTRUCTIONS AND LASER SAFETY

The light source emitted from this product can potentially cause eye

injury if not set up and used properly. The light source emitted from a

laser is very different from any other light sources with which you may

be aware of. Laser light is thousands of times more concentrated

than any light from any other kind of light source. This concentration

of light can cause instant eye injuries, primarily by burning the retina

(the back of your eyeball contatining cells that are sensitive to light).

Even if you cannot feel “heat” from a laser beam, it can still poten-

tially injure or blind you or your audience. Even very small amounts

of laser beam light are potentially hazardous even at long distances.

Laser eye injuries can be sustained faster than you can blink.

Do not think that because this laser splits the laser beam into hun-

dreds of beams and that the laser beam is scanned out in high

speed, that an individual laser beam is safe for eye exposure. This

laser uses dozens of milliwatts of laser power (Class 3B levels inter-

nally) before it splits into multiple beams (Class 3R levels). Many of

the individual beams are potentially hazardous to the eyes.

Do not that because the laser light is moving, it is safe. This is not

true. Nor, do the laser beams always move. Since eye injuries can

occur instantly, it is critical to prevent even the smallest possibility of

any direct eye exposure. In the laser safety regulation, it is not legal

to aim Class 3R lasers in areas which people can get exposed. This

is true even if it is aimed below people’s faces, such as on a dance

oor.

Do not operate the laser without rst reading and understanding

all safety and technical data in this manual.

Always set up and install all laser effects so that all laser light is at

least 3 meters (9.8 feet) above the oor on which people can stand.

After setting up, and before public use, test laser to ensure proper

function. Do not use if any defect is detected. Do not use if laser

emits only one or two laser beams rather than dozens/hundreds, as

this could indicate damage to the diffraction grating optic, and could

allow emission of higher laser levels above Class 3R.

Do not point lasers at people or animals. Never look into the laser

aperture or laser beams.

Do not point lasers in areas in which people can potentially get

exposed, such as uncontrolled balconies, etc.

Do not point lasers at highly reective surfaces, such as windows,

mirrors and shiny metal. Even laser reections can be hazardous.

Never point a laser at aircraft, this is a federal offense.

Never point un-terminated laser beams into the sky.

Do not expose the output optic (aperture) to cleaning chemicals.

Do not use laser if the laser appears to be emitting only one or two

beams.

Do not use the laser if the housing is damaged, the housing is open,

or if the optics appear damaged in any way.

Never open the laser housing. The high laser power levels inside of

the protective housing can start res, burn skin and will cause instant

eye injury.

Never leave this device running unattended.

The operation of a class 3R laser show is only allowed if the show

is controlled by a skilled and well- trained operator, familiar with the

data included in this manual.

The legal requirements for using laser entertainment products vary

from country to country. The user is responsible for the legal require-

ments at the location/country of use.

Always use proper lighting safety cables when hanging lights and

effects overhead.

Micro Galaxian Laser Warnings and Safety

©American DJ® - www.americandj.com - Micro Galaxian Instruction Manual Page 8©American DJ® - www.americandj.com - Micro Galaxian Instruction Manual Page 7

Micro Galaxian Laser Warning Labels

CAUTION IMPORTANT! When installing this projector, make sure

that it is mounted in a manner that prevents the audience from

looking directly into the beam, and the beam from striking the

audience.

Operating Modes: The Micro Galaxian has 2 operating modes;

sound active mode and auto mode.

• Sound Active mode -

The fixture will react to sound, chasing through the built-in programs.

• Auto Play -

This function run automatically run through all of units patterns.

Sound Active Mode: This mode allows the unit to run to the beat of

the music.

1. Press the Auto/Sound button. You are in sound active mode

if the red LED on the front of the unit ashes and every

movement.

Auto Play: This mode allows the unit to run Auto Play.

1. Press the Auto/Sound button till the red LED on the front of the

unit stays on. You are now in Auto Play.

2. Use the speed knob underneath the button to control the speed

of the program.

Remote Control: Use the included remote to control various func-

tions. Please see below for button control.

Note: This remote control has a set code that is set for this laser and

this laser only. The remote will not control any other Micro Galaxian,

only the unit the remote came with. If this code happens to get erased

the remote will not work with the unit. Please call American DJ support

(see page 2) and they will help you reset the code.

A Button - Use this button to switch between Auto Play and Sound

Active.

B Button - Use this button to Blackout the unit.

C Button - Use this button to select colors. Either red, green, or red &

green.

D Button - Use this button to select your desired rotation.

Micro Galaxian Operation

CAU TION - CLA SS 3R

LASER RADIATION WHEN OPEN

AVOID DIRECT EYE EXPOSURE

12 mm

40mm

AVOID EXPOSURE

LASER RADI ATION

IS EM ITTE D FROM

THI S APERTURE

20 mm

40mm

17 mm

40mm

American DJ Supply,Inc.

6122 S.Eastern Ave.

Los Angeles. CA 90040 USA

Manufactured:

20mm

AVOID EXPOSURE

LASER RADIATION

IS EMITTED FR OM

THIS APE RTU RE

40mm

55 mm

27mm

A.D.J Supply Europe B.V

Junostraat 2,6468 EW Kerkrade,

Netherlands

Manufactured:

DJ ADJ

LASER RADIATION AVOID

DIRECT EYE EXPOSURE

Maximum output <5 mW

Wavelength: 650, 532nm

Class IIIa laser product

This device complies with 21 CFR chapter I,

Subchapter J, or CFR 1040.10 and 1040.11

30 m m

41 mm

©American DJ® - www.americandj.com - Micro Galaxian Instruction Manual Page 9 ©American DJ® - www.americandj.com - Micro Galaxian Instruction Manual Page 10

Fixture Cleaning: Due to fog residue, smoke, and dust cleaning

the internal and external lenses should be carried out periodically to

optimize light output.

1. Use normal glass cleaner and a soft cloth to wipe down the out-

side casing.

2. Clean the external optics with glass cleaner and a soft cloth every

20 days.

3. Always be sure to dry all parts completely before plugging the

unit back in.

Cleaning frequency depends on the environment in which the fixture

operates (I.e. smoke, fog residue, dust, dew). In heavy use we recom-

mend cleaning on a monthly basis. Periodic cleaning will ensure lon-

gevity, and crisp beam output.

Micro Galaxian Cleaning

Micro Galaxian Trouble Shooting

Trouble Shooting: Listed below are a few common problems that

you may encounter, with solutions.

No light output from the unit;

1. Be sure you have connected your unit into a standard wall

outlet.

2. Be sure that the unit is not in blackout mode.

Unit does not respond to sound;

1. Low frequencies (bass) should cause the unit to react to sound.

Tapping on the microphone, quiet or high pitched sounds may

not activate the unit.

2. Adjust the sound sensitivity knob located at the rear of the unit.

Micro Galaxian Warranty

MANUFACTURER’S LIMITED WARRANTY

A. American DJ, Inc. hereby warrants, to the original purchaser, American DJ and American

Audio products to be free of manufacturing defects in material and workmanship for a prescribed

period from the date of purchase (see specic warranty period on reverse). This warranty shall be

valid only if the product is purchased within the United States of America, including possessions

and territories. It is the owner’s responsibility to establish the date and place of purchase by ac-

ceptable evidence, at the time service is sought.

B. For warranty service you must obtain a Return Authorization number (RA#) before

sending back the product. Contact American DJ, Inc. Service Department at 800-322-6337. Send

the product only to the American DJ, Inc. factory. All shipping charges must be pre-paid. If the

requested repairs or service (including parts replacement) are within the terms of this warranty,

American DJ, Inc. will pay return shipping charges only to a designated point within the United

States. If the entire instrument is sent, it must be shipped in it’s original package. No accessories

should be shipped with the product. If any accessories are shipped with the product, American DJ,

Inc. shall have no liability whatsoever for loss of or damage to any such accessories, nor for the

safe return thereof.

C. This warranty is void if the serial number has been altered or removed; if the product is

modied in any manner which American DJ, Inc. concludes, after inspection, affects the reliability

of the product; if the product has been repaired or serviced by anyone other than the American DJ,

Inc. factory unless prior written authorization was issued to purchaser by American DJ, Inc.; if the

product is damaged because not properly maintained as set forth in the instruction manual.

D. This is not a service contract, and this warranty does not include maintenance, cleaning

or periodic check-up. During the period specied above, American DJ, Inc. will replace defec-

tive parts at its expense with new or refurbished parts, and will absorb all expenses for warranty

service and repair labor by reason of defects in material or workmanship. The sole responsibility

of American DJ, Inc. under this warranty shall be limited to the repair of the product, or replace-

ment thereof, including parts, at the sole discretion of American DJ. All products covered by this

warranty were manufactured after January 1, 1990, and bear identifying marks to that effect.

E. American DJ, Inc. reserves the right to make changes in design and/or improvements

upon its products without any obligation to include these changes in any products theretofore

manufactured. No warranty, whether expressed or implied, is given or made with respect to any

accessory supplied with products described above. Except to the extent prohibited by applicable

law, all implied warranties made by American DJ, Inc. in connection with this product, including

warranties of merchantability or tness, are limited in duration to the warranty period set forth

above. And no warranties, whether expressed or implied, including warranties of merchantability

or tness, shall apply to this product after said period has expired. The consumer’s and/or Dealer’s

sole remedy shall be such repair or replacement as is expressly provided above; and under no

circumstances shall American DJ, Inc. be liable for any loss or damage, direct or consequential,

arising out of the use of, or inability to use, this product.

This warranty is the only written warranty applicable to American DJ and American Audio

Products and supersedes all prior warranties and written descriptions of warranty terms and

conditions heretofore published.

MANUFACTURER’S LIMITED WARRANTY PERIODS:

• All American Audio Products = 1-year (365 day) Limited Warranty (except V-Plus Series Ampli-

ers)

• All American Audio V-Plus Series Ampliers = 3-year (1095 day) Limited Warranty

• American DJ Lighting and American DJ Branded Products = 1-year (365 day) Limited Warranty

(Such as: Special Effect Lighting, Intelligent Lighting, UV lighting, Strobes, Fog Machines, Bubble

Machines, Mirror Balls, Par Cans, Trussing, Lighting Stands etc. excluding Laser Products, lamps,

and Star Tec Series)

• American DJ Laser Products and Star Tec Products = 90-Day Limited Warranty

• American DJ L.E.D. Products = 3-year (1095 day) Limited Warranty (excluding motors which

have a 1-year (365 day Limited Warranty)

Model: Micro Galaxian

Voltage: 100~240V, 50/60Hz

Power Consumption: 9W

Lasers: 30mW Green Diode

80mW Red Diode

Beam Angle: 82 Degrees

Dimensions: 2”(L) x 4.75”(W) x 3.5”(H)

50mm x 120mm x 90mm

Colors: Red & Green

Weight: 2 Lbs. / .6 kgs.

Duty Cycle: None

Sound Active: Yes

Working Position: Any Safe, Secure Position

Warranty: 90 Days

Please Note: Specications and improvements in the design

of this unit and this manual are subject to change without any

prior written notice.

Micro Galaxian Specifications

American DJ®

American DJ World Headquarters:

6122 S. Eastern Ave. Los Angeles, CA 90040 USA

Tel: 323-582-2650 / Fax: 323-725-6100

Web: www.americandj.com / E-mail: [email protected]

American DJ Europe

Junostraat 2

6468 EW Kerkrade

Netherlands

[email protected] / www.americandj.eu

Tel: +31 45 546 85 00 / Fax: +31 45 546 85 99

Auto Sensing Voltage: This xture contains a electronic bal-

last, which will auto sense the voltage when it is plugged into the

power source.

Inhaltsverzeichnis

Andere ADJ Messgerät Handbücher

ADJ

ADJ Green Phantom Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung